0008925079767

Diablo

Model D1084L

Internet #100660707

Store SKU #833661

Store SO SKU #315129

10 in. x 84-Tooth Laminate/Non-Ferrous Metal Cutting Saw Blade

Frequently Bought Together

Product Overview

Get durability and longevity during heavy-duty use with the Diablo 10 in. x 84-Tooth Laminate/Non-Ferrous Metal Cutting Saw Blade. It was made of Freud TiCo high-density carbide that is thin yet strong. The Perma-SHIELD non-stick coating reduces friction and pitch buildup to provide a smooth, accurate cut.

  • Great for cutting woods, laminates, melamine and non-ferrous metals
  • TiCo high-density carbide construction to give you a strong, long-lasting blade
  • Laser-cut stabilizer vents to trap noise and reduce vibration for accurate cuts
  • Perma-SHIELD non-stick coating to protect against heat, gumming and corrosion
  • Works with chop/miter, slide miter and table saws
  • Tri-metal shock-resistant brazing to enable the carbide tips to withstand extreme impact

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

25 Questions51 Answers

Customer Questions & Answers

10 in. x 84-Tooth Laminate/Non-Ferrous Metal Cutting Saw Blade
10 in. x 84-Tooth Laminate/Non-Ferrous Metal Cutting Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Need to cut extruded, 13/16" thick, composite decking made up of 60% bamboo/40% Plastic... OK for this?

This question is from 10 in. x 80-Tooth Non-Ferrous / Plastic Cutting Saw Blade
Asked by
Read all my Q&A
September 1, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

September 14, 2016
Answer: 
Hi, Brett - we recommend using the D1072CD as it is specifically designed for composite deck material such as Trex.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Aromas, CA
Read all my Q&A
Home Improvement Profile: DIYer
September 6, 2016
Answer: 
This blade should work for your intended use.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

can I use this to cut 26 gauge roofing tin?

This question is from 7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade
Asked by
Read all my Q&A
July 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 28, 2016
Answer: 
Hi, Mark - For your intended use, we recommend using the Diablo 7 ¼” 70 Tooth Steel Demon blade (D0770F), which is designed for thin gauge metals. The D0770F is ideal for smooth clean cuts in thinner material.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

SKU 833661, 10 inch metal cutting saw blade

This question is from 10 in. x 84-Tooth Laminate/Non-Ferrous Metal Cutting Saw Blade
Asked by
Payson, AZ 85541
Read all my Q&A
May 18, 2016
Can this blade be used to cut thin steel rain gutter material?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 25, 2016
Answer: 
Hi, Rob - The Diablo D1084L is designed to cut Non-Ferrous metals and Laminate Flooring. This blade will cut Rain gutter material very well and should work for what the customer is looking to achieve.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pittsburgh
Read all my Q&A
Home Improvement Profile: DIYer
May 20, 2016
Answer: 
No, laminates, brass, copper, aluminum, plastic, fiberglass type materials
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Would this be the right blade to cut thick HDPE?

This question is from 10 in. x 80-Tooth Non-Ferrous / Plastic Cutting Saw Blade
Asked by
Columbia, SC
Read all my Q&A
June 29, 2016
I need to cut 1 inch thick HDPE cutting board material into several pieces. TCG with a negative hook angle is what I want, but 80 teeth seems like a lot for something this thick
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 12, 2016
Answer: 
Hi, Mike - The Diablo D1080N will be ideal blade to use because of its TCG tooth design and -5 degree hook angle. We recommend raising the blade in the material so that approximately 1” of the blade is exposed. This will minimize the amount of teeth working in the material minimizing the potential of marking the material.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-09-19 T12:43:30.005-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100660707, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 43ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 82 reviewers.
Rated 5.0 out of 5.0 by Great for fryreglet I use this blade to cut fryreglet (aluminium) and leave a clean cut, it cut it like butter , no messy job April 30, 2016
Rated 5.0 out of 5.0 by Cuts nonferrous metal smoothly I've cut aluminum and also thin walled steel, bifold door runners with this blade. I don't force the cut, I cut very slowly yet steadily and it works quite well. It is necessary to file the cut edges smooth. July 5, 2016
Rated 5.0 out of 5.0 by was definatlely worth it made the project so much easier.Blade performed excellent. cut the Laminate like Butter. June 30, 2016
Rated 5.0 out of 5.0 by Diablo metal cutting saw blade Performed without a hitch. Beautiful finished product. July 12, 2016
Rated 5.0 out of 5.0 by Nice blade I like the clean sharp cuts I get doing screen frames and finish work July 5, 2016
Rated 5.0 out of 5.0 by Great blade Mounted the blade on my table saw the laminate tile was to wide to use on my chop saw left nice smooth edge and did not chip the laminate December 17, 2015
Rated 5.0 out of 5.0 by Needed a fine blade I am replacing the trim on my home with PVC molding boards and it requires a fine blade to cut a clean cut. I am very pleased with the clean cut of this blade. May 24, 2016
Rated 5.0 out of 5.0 by Money well spent it did the job This blade cut Aluminum stock like butter . Great blade June 14, 2016
  • 2016-09-17 T12:58:01.443-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_82, tr_82
  • loc_en_US, sid_100660707, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 46ms
  • REVIEWS, PRODUCT