Model # DCP045VGPS01G

Internet #202830887

Store SKU #249401

Diablo 4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
0008925093114

Diablo

4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit

  • Great for sanding
  • Works with angle grinders
  • Perfect for working with metals
$10.47 /each

Frequently Bought Together

Product Overview

Diablo's 50-Grit Grinder/Sander Conversion Kit converts your angle grinder into a sander. This kit includes one back-up pad, one 5/8-11 locknut and two 50-grit (coarse) fiber discs. The discs are equipped with breakthrough innovations that improve performance, extend sanding life and increase productivity. Use this conversion kit with angle grinders; it's ideal for metal applications.

  • 4-1/2 in. diameter
  • 5/8 in. arbor
  • Recommended for sanding
  • Works with angle grinders
  • Ideal for working with metals
  • Includes one back-up pad, one 5/8-11 locknut and two 50-grit (coarse) fiber discs

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

7 Questions6 Answers

Customer Questions & Answers

4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Does it fit a 6" craftman grinder

This question is from 4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
Asked by
Bayamon
Read all my Q&A
May 24, 2016
Does it fit the 6" craftman grinder, I think the arbor is 1/2, not 5/8, would it fit? Is there another product that will fit?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 7, 2016
Answer: 
Hi, et67 - In order to further understand your question and to provide the best answer, please reach out to us at cwashington@freudtools.com.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

what diablo fiber disc of 100 grit can I use with this? is there a 4.5 inch 100 grit fiber disc sold

This question is from 4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
Asked by
Read all my Q&A
May 17, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

May 25, 2016
Answer: 
Hi, Sri - Unfortunately, at this time Diablo Fiber discs in the 4 ½” size only range in grits of 24, 36, and 50 grit.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Is there a pad for this that will remove large amounts of Granite?

This question is from 4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
Asked by
MA
Read all my Q&A
May 1, 2016
I need the equivalent of a planer to level setts in driveway.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

May 11, 2016
Answer: 
Hi, Arkenstone007 - Unfortunately, the Diablo Fiber Disc is designed for metal polishing, wood and fiberglass removal. They are not designed for masonry or stone applications.We recommend using the Ridgid 4 ½” Diamond Cup Wheel (THD Model # HD-AWD40).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

How do sanding pads attach?

This question is from 4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
Asked by
cincinnati
Read all my Q&A
March 17, 2016
Does this have a Velcro side to attach pads?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 28, 2016
Answer: 
Hi, EC - The Grinder Conversion kit is intended to convert the grinder to be able to use with Diablo Fiber Discs. The Fiber discs do not have a Hook and Loop backing. The Grinder Conversion kit will not accommodate Hook and Loop sanding discs.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
2 »
  • 2016-10-30 T23:44:02.222-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202830887, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT

Customer Reviews

4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit is rated 4.4 out of 5 by 14.
Rated 5 out of 5 by from This review is for the Diablo 4 ½” x 5/8” 50-Grit Grinder/Sander Conversion Kit, model # DCP045VG... This review is for the Diablo 4 ½” x 5/8” 50-Grit Grinder/Sander Conversion Kit, model # DCP045VGPS01G. I purchased the Diablo kit as an accessory to my Milwaukee angle grinder, model 6141-30. The Diablo kit is rated for a maximum of 13,280 RPM so there was no issue with using it on the 12,000 RPM grinder. The spindle size (5/8”) was a perfect match. See your grinder manual for the best way to install the Diablo conversion kit onto your grinder; apparently some makes/models of grinders have “quick attach” adapters or some other such features which make the installation somewhat more challenging. For my application the Diablo went right onto my Milwaukee. I’m not a professional metal worker, just a DIY home owner, so YMMV. There’s enough flex in the rubber backing to allow the sanding disk to get into edges and crannies and such and the 50-grit disk I found to be quite aggressive. (I’m working on some metal doors and a careful touch is needed not to mar the surface of the metal. Again, I’m not an expert at using an angle grinder, I just wanted a quick way to remove some old paint and such). From my limited usage, I’ve found that the Diablo kit worked “as advertised” for my project. Safety gear is a must – eye protection (I wear safety glasses and a full-face shield), hand protection (I wear leather gloves) and a respirator is recommended when sanding creates dust or fumes (different respirators and masks are designed for different applications). I’m happy with the price point, the quality, and the usability of the conversion kit. HTH Regards, Jim
Date published: 2016-11-08
Rated 5 out of 5 by from I was resurfacing cabinets for a client that had been... I was resurfacing cabinets for a client that had been paint over so many time none of my sanders would work, so I looked for alternative and this was it. It made such easy work of everything of stripping the varnish and paint. Highly recommend it....
Date published: 2017-01-18
Rated 3 out of 5 by from Will not fit Dewalt with quick change shaft Package says it will fit all grinders with 5/8 shaft etc. It will not fit my DeWalt grinder with the quick change feature. This is Dewalt's fault. The Dewalt shaft is too short. Next time I will not buy DeWalt.
Date published: 2016-08-31
Rated 5 out of 5 by from Turns a Ryobi angle grinder into a top notch sander....excellent product! Turns a Ryobi angle grinder into a top notch sander....excellent product!
Date published: 2016-12-07
Rated 5 out of 5 by from Diablo 4-1/2" ×5/8" 50 grit grinder/sander kit Great product .i recommend it. It gets the job done
Date published: 2016-09-09
Rated 5 out of 5 by from Excellent method of removing old paint from deck railings and posts So, I bought this attachment to use on my 4 and 1/2 inch Dewalt Grinder in a big deck and deck rail renovation at one of my homes. I compared it with the 5 inch disc sander I bought too. This far outperformed the 4.2 Amp disc sander. I recommend using proper eye protection and gloves and a mask, because it is super powerful on the Dewalt Grinder.
Date published: 2016-06-28
Rated 5 out of 5 by from A hidden Gem! Perfect conversion for a grinder which I then used with fiber pads to grind off old black mastic under vinyl tiles. Works perfectly. first I purchased a piece of junk from Lowes which had a nut whose shank wasn't long enough to reach the grinder post.
Date published: 2016-02-10
Rated 4 out of 5 by from Horrible packaging, limited disc grit selection The welded clamshell packaging requires a sharp knife or box cutter on three side to extract the contents and, when opened, cannot be used to store the miscellaneous pieces. The 50-grit discs included are the finest grit available in the Diablo 4.5-inch disc size; I would have purchased some finer grit discs had they been available. The 5/8-11 spindle on my Makita Sander Polisher (angle grinder) extends about 1/4 inch beyond the disc surface; a 5/8-11 nut between the rubber backing disc and the grinder is necessary to prevent the spindle from contacting the work surface. These things being noted, the conversion kit and discs work well otherwise.
Date published: 2016-07-17
  • y_2017, m_1, d_20, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_, sid_202830887, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • REVIEWS, PRODUCT