Model # D0550N

Internet #203768109

Diablo 5-3/8 in. x 50-Tooth x 20 mm Arbor Non-Ferrous Metal/Plastic Cutting Trim Saw Blade
0008925099512

Diablo

5-3/8 in. x 50-Tooth x 20 mm Arbor Non-Ferrous Metal/Plastic Cutting Trim Saw Blade

$39.97 /each

Frequently Bought Together

Product Overview

The Diablo 5-3/8 in. x 50 tooth non-ferrous metal/plastic circular saw blade is made of Freud TiCo high-density carbide with titanium, which offers durability and longevity with heavy-duty use. The laser-cut blade is thin, but strong and requires less cutting power thus making it ideal for underpowered saws at the jobsite. The Perma-Shield non-stick coating reduces friction and pitch buildup for a smooth, accurate cut.

  • Freud TiCo hi-density special blend carbide is specially formulated to maximize cutting life in copper, aluminum, brass, plastics, laminate flooring and fiber glass
  • Laser-cut stabilizer vents absorb noise and vibration keeping the blade straight and true for superior quality cuts
  • Laser-cut heat expansion slots allow the blade to expand due to heat build-up, thus keeping the cut true and straight
  • Non-stick Perma-SHIELD coating reduces drag and shields the blade against heat, gumming and corrosion
  • Advanced laser-cut thin kerf design removes less material for precision, accuracy and long cutting life
  • Tri-metal shock resistant shock brazing allows the carbide tips to withstand extreme impact for maximum durability
  • Triple chip grind (TCG) for long life and clean, burr-free cuts
  • For use on Milwaukee M18 Cordless lithium-ion 5-3/8 in. metal saw (2682-20) and similar metal cutting circular saws
  • Arbor diameter: 20mm
  • Kerf thickness: 1.6mm or 0.063 in.
  • Plate thickness: 1.0mm or 0.039 in.
  • Red saw blades are a registered trademark of Freud America, Inc.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

26 Questions52 Answers

Customer Questions & Answers

5-3/8 in. x 50-Tooth x 20 mm Arbor Non-Ferrous Metal/Plastic Cutting Trim Saw Blade
5-3/8 in. x 50-Tooth x 20 mm Arbor Non-Ferrous Metal/Plastic Cutting Trim Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Can the Diablo 7-1/4 x 56 blade be sharpened?

This question is from 7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade
Asked by
California
Read all my Q&A
October 14, 2016
Where can I get these blades sharpened?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 25, 2016
Answer: 
Ne,
Depending on the wear on the blade, yes it can be resharpend at a certified center.
If you go to www.diablotools.com and click on the link that says sharping you will find a list of certified sharpeners.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Need to cut extruded, 13/16" thick, composite decking made up of 60% bamboo/40% Plastic... OK for this?

This question is from 10 in. x 80-Tooth Non-Ferrous / Plastic Cutting Saw Blade
Asked by
Read all my Q&A
September 1, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

September 14, 2016
Answer: 
Hi, Brett - we recommend using the D1072CD as it is specifically designed for composite deck material such as Trex.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Aromas, CA
Read all my Q&A
Home Improvement Profile: DIYer
September 6, 2016
Answer: 
This blade should work for your intended use.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

can I use this to cut 26 gauge roofing tin?

This question is from 7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade
Asked by
Read all my Q&A
July 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 28, 2016
Answer: 
Hi, Mark - For your intended use, we recommend using the Diablo 7 ¼” 70 Tooth Steel Demon blade (D0770F), which is designed for thin gauge metals. The D0770F is ideal for smooth clean cuts in thinner material.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Would this be the right blade to cut thick HDPE?

This question is from 10 in. x 80-Tooth Non-Ferrous / Plastic Cutting Saw Blade
Asked by
Columbia, SC
Read all my Q&A
June 29, 2016
I need to cut 1 inch thick HDPE cutting board material into several pieces. TCG with a negative hook angle is what I want, but 80 teeth seems like a lot for something this thick
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 12, 2016
Answer: 
Hi, Mike - The Diablo D1080N will be ideal blade to use because of its TCG tooth design and -5 degree hook angle. We recommend raising the blade in the material so that approximately 1” of the blade is exposed. This will minimize the amount of teeth working in the material minimizing the potential of marking the material.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-10-30 T23:17:27.666-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203768109, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 48ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 87 reviewers.
Rated 5.0 out of 5.0 by Great blade I bought this blade for my dewalt sliding miter saw to cut hurricane panels and it did not disappoint, after over 500 cuts through panels, studded angle and H header it still cut like brand new. The cuts were very smooth and I did not have to file at all, looked as good as if the panels were sheared. I would absolutely recommend this blade for aluminum cutting. October 16, 2016
Rated 2.0 out of 5.0 by Saw blade One tooth breaks off 50% of the time other thenthat cuts ok October 25, 2016
Rated 4.0 out of 5.0 by Excellent Works great! We had no complaints and we'll use the same brand in the future if needed. October 15, 2016
Rated 5.0 out of 5.0 by cuts like a hot knife through butter Used for my crown molding install. Cuts are clean. Will use same blade for my hardwood, will add more detail to see how long it lasts. October 5, 2016
Rated 5.0 out of 5.0 by Does everything it claims! I bought this saw blade to cut a ten foot conference room table that has a laminate top and bottom and is 1+1/4" of epoxy and compressed sawdust in the center. A very difficult material to cut. The Diablo blade went through it with no problem at all. I stopped every two feet to check the temperature of the blade and it was just slightly warm. The final cut left both laminates clean and neat. The Diablo exceeded my expectations (and that doesn't happen very often). February 10, 2016
Rated 5.0 out of 5.0 by Great for fryreglet I use this blade to cut fryreglet (aluminium) and leave a clean cut, it cut it like butter , no messy job April 30, 2016
Rated 5.0 out of 5.0 by Exactly what I needed. Easy to install. Cuts great. NIce & sharp. Exactly what I needed. Easy to install. Cuts great. NIce & sharp September 13, 2016
Rated 5.0 out of 5.0 by new saw blade needed blade for cutting oak this blade is one of the best i have ever used!!!!!! September 20, 2016
  • 2016-10-30 T21:30:50.351-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_87, tr_87
  • loc_en_US, sid_203768109, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT