Model # D0506CH

Internet #100665540

Store SKU #876067

Store SO SKU #315129

Diablo 5 in. x 6 Tooth Fiber Cement Saw Blade
0008925081593

Diablo

5 in. x 6 Tooth Fiber Cement Saw Blade

$19.97 /each

Frequently Bought Together

Product Overview

Constructed of abrasion-resistant Freud TiCo carbide, the Diablo 5 in. x 6 Tooth Circular Saw Blade is durable and resists the highly abrasive nature of fiber cement. The perma-shield non-stick coating protects the blade from heat, rust and corrosion for a longer blade life. The blade has a super thin laser cut kerf for fast, clean cuts with much less dust.

  • Designed to fit all 5/8 in. arbors
  • Cuts quickly, accurately and cleanly through fiber cement
  • Abrasion-resistant Freud TiCo carbide with perma-shield non-stick coating
  • Laser cut stabilizer vents trap noise and vibration for accurate cuts

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

8 Questions15 Answers

Customer Questions & Answers

5 in. x 6 Tooth Fiber Cement Saw Blade
5 in. x 6 Tooth Fiber Cement Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

How many cuts is a 4 tooth fiber cement blade rated for?

This question is from 7-1/4 in. x 4-Tooth Polycrystalline Diamond (PCD) Tipped James Hardie/Fiber Cement Saw Blade
Asked by
Read all my Q&A
October 11, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 12, 2016
Answer: 
Hi Qwerty,
There is no specific number of cuts D0704DH is rated for, however it is designed to last up to 60 times longer than a standard carbide tipped Fiber Cement Blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Can it be used on a table saw?

This question is from 7-1/4 in. x 4-Tooth Polycrystalline Diamond (PCD) Tipped James Hardie/Fiber Cement Saw Blade
Asked by
Read all my Q&A
October 6, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

October 10, 2016
Answer: 
Hi Serge,
Part #D1006DH is designed for a 10" table saw and would be a better option.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 6, 2016
Answer: 
Yes, the blade can be used on a table saw.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

can these saw blades be resharpened?

This question is from 10 in. x 6-Tooth Polycrystalline Diamond (PCD) Tipped James Hardie/Fiber Cement Saw Blade
Asked by
Read all my Q&A
August 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 31, 2016
Answer: 
Hi, richandfunny - Unfortunately, Diablo's PCD blades cannot be resharpened.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

will this work in a basic 12 amp skil circular saw

This question is from 7-1/4 in. x 4-Tooth Polycrystalline Diamond (PCD) Tipped James Hardie/Fiber Cement Saw Blade
Asked by
FL
Read all my Q&A
May 4, 2016
I am using this outdoors. I have plenty of dust masks and goggles. I just want to know if the saw will hold up.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Littleton, CO
Read all my Q&A
Home Improvement Profile: DIYer
May 6, 2016
Answer: 
Yes. Although rather than a Skil saw I used a Bosch 7 1/4" 12 amp circular saw and it worked perfectly. It went through the Hardie Backer 500 material as easy as a 3/4" piece of plywood. I tried other blades before using the Diablo and they were all ruined after doing small cuts. Once I installed the Diablo blade I did a complete shower installation and at the end the blade was cutting just as well as it Read More
Yes. Although rather than a Skil saw I used a Bosch 7 1/4" 12 amp circular saw and it worked perfectly. It went through the Hardie Backer 500 material as easy as a 3/4" piece of plywood. I tried other blades before using the Diablo and they were all ruined after doing small cuts. Once I installed the Diablo blade I did a complete shower installation and at the end the blade was cutting just as well as it did on the first cut. Sounds like your doing everything right, I was going to warn you about the dust, but if your outside and using a mask it's no problem. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Conway, Arkansas
Read all my Q&A
Home Improvement Profile: DIYer
May 6, 2016
Answer: 
Hold up? Not only will it hold up, it is THE ONLY blade that will hold up. You will ruin the best carbide blade in one or two passes. I did my entire project with this one blade, and a Hitachi jig saw blade made for fiber cement, to finish inside cuts started with the circular saw. I used this blade with my (7-1/4") Milwaukee brushless saw. The Milwaukee brushless tools are absolutely phenomenal in their Read More
Hold up? Not only will it hold up, it is THE ONLY blade that will hold up. You will ruin the best carbide blade in one or two passes. I did my entire project with this one blade, and a Hitachi jig saw blade made for fiber cement, to finish inside cuts started with the circular saw. I used this blade with my (7-1/4") Milwaukee brushless saw. The Milwaukee brushless tools are absolutely phenomenal in their power and battery life.
You are on the right track with dust mitigation. This blade does reduce somewhat the dust produced, but you still definitely have to deal with it. I tried using a mask, but with glasses, it just wasn't working. You must have eye protection however. The blade tends to spit tiny little bits all over the place. I made sure my cutting took into account the wind direction, and I also used a fan to keep it going in the right direction. For a few long, rip cuts, I even resorted to controlling my breathing. You can't make a 12 foot cut without stopping to reposition yourself, so I would hold my breath while I cut where I was standing, breathed when I stopped to reposition, and so on. If you were doing this for a living, you would have to have the dust extraction system even outdoors.
Since this saw blade is directly related to fiber cement board installation, I hope the moderators will allow me this one other recommendation. Do whatever you have to, to get a SIDING coil nail gun. Forget the cost. Trust me, you will thank yourself a 1000 times over. I got the Hitachi and believe me, it was worth its weight in gold. It was SO much easier, mostly because it allows one-handed nailing while holding the siding with the other hand, not to mention being able to place a nail at arms length. I did have some help, but I did probably 90% of the siding by myself. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 5, 2016
Answer: 
Yes, this will work on a basic 12 amp Skil circular saw.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T22:47:18.844-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100665540, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 41ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 61 reviewers.
Rated 4.0 out of 5.0 by Works on a cordless saw! It may seem small. But it does work on a cordless saw. Only 4 stars because it didn't seem to last very long. September 13, 2016
Rated 4.0 out of 5.0 by good blade for dollars spent I certainly Wish you carried a 12" James Hardie blade. Instead I had to purchase a 12" Rigid concrete blade instead of a blade made more for cutting through Hardie siding August 16, 2016
Rated 4.0 out of 5.0 by Amazing Worth every penny to cut tile board. Arbor size is not for small circular saws though. May 3, 2016
Rated 5.0 out of 5.0 by Best blades on the market.. I have been using these blades for a long time and I have to say that they work great!! Here is a tip from someone that has an increased knowledge of this type of work. These blades work Way better and last Way longer when you uses a good saw with some nice speed... I make some very nice cut's and have used these blades with my Dewalt Corded Saw and this saw has some HP. lol. Great blade when she's spinning at a higher rate of speed. If I used the Makita cordless I can get a blade to last through about 200 8.25''x 12' boards easy. Now the trim is different, that can eat up just about any blade. I have even used a cement diamond blade for certain instances. August 31, 2015
Rated 5.0 out of 5.0 by Great Purchase This is the 2nd Hardie blade I have owned and the Diablo cuts smoother and better than the other. The blade polished super smooth while the Diamond teeth just keep cutting smooth and straight. I don't think I will need another for some time, unless someone borrows this one! September 27, 2016
Rated 4.0 out of 5.0 by Blade for cutting cement The blade cut through cinder block and patio block very nicely. However, it didn't last as long as I had expected or hoped, especially for $55. I was careful not to force it and to let it cool every 15-20 seconds. Even so it did a medium sized job, but died at the end. September 14, 2016
Rated 5.0 out of 5.0 by The best Diablo blade made my job easier. Great to work with. I loved it could not ask for more. September 12, 2016
Rated 5.0 out of 5.0 by Hardie Blade Have ripped many Hardie board pieces of aiding and the blade is holding up very well. September 6, 2016
  • 2016-10-30 T20:56:00.499-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_61, tr_61
  • loc_en_US, sid_100665540, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT