Model # D0641R

Internet #202035229

Store SKU #451947

Diablo 6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
0008925083634

Diablo

6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade

$19.97 /each

Frequently Bought Together

Product Overview

Constructed with TiCo Hi-Density special-blend carbide, this Diablo 6-1/2 in. circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in plywood. The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight. An ultra-slim kerf produces a thin swath for less material removal and fast, effortless operation in dry or wet lumber.

  • TiCo Hi-Density titanium carbide composition increases performance and maximizes cutting life
  • Perma-SHIELD nonstick coating reduces drag and shields the blade against heat and friction
  • Laser-cut stabilizer vents absorb noise and vibration, keeping the blade straight and true for superior quality cuts
  • Designed to fit 5/8 in. arbors for accurate blade rotation
  • Ultra-slim kerf provides fast, clean cuts with minimal material removal
  • Laser-cut heat expansion slots ensure wobble-free performance

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

10 Questions29 Answers

Customer Questions & Answers

6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Can this blade cut aluminum extrusion, eg- 1 x 1 x 1/16 square tube? Or x 1/8 wall?

This question is from 6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
Asked by
NJ
Read all my Q&A
April 24, 2016
What would be better (for a cordless circular saw. Or a 7 1/4 in miter saw)?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Yorkville, IL
Read all my Q&A
October 11, 2016
Answer: 
It can. I prefer a Miter saw.. Safety glasses are a must!!!! Metal goes everywhere.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 11, 2016
Answer: 
Hi, RW1257 - The Diablo 6 ½” x 40T blade is not recommended to cut non-ferrous materials. However, we do sell a 6 ½” x 48T metal cutting blade that will cut non-ferrous metals as well. The Part number is D0648F. We do not recommend putting a 7 ¼” blade on a miter saw either. Please either use the D1084L or the D1296L depending if the miter saw is a 10” saw or a 12” saw.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
San Diego, CA, USA
Read all my Q&A
Home Improvement Profile: DIYer
April 25, 2016
Answer: 
This is not a metal cutting blade. You want to look for a blade made to cut non-ferrous metal, that should cut through aluminum.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

6 1/2 Inch blades go dull faster than 7 1/4

This question is from 6-1/2 in. x 24-Tooth Framing Saw Blade
Asked by
Cleveland, Ohio
Read all my Q&A
June 7, 2016
I used Diablo blades in both my 7 1/4 and 6 1/2 circular saws and notice the blades on the 6 1/2 circular saw seem to go dull quicker. Is this because of the design of the smaller thinner blade is not as durable as a 7 1/4 or just the lack of power in the 18 volt saw does have as much power when the the blade goes just a little dull.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Phoenix, AZ
Read all my Q&A
July 5, 2016
Answer: 
I have not had any problems with the 6-1/2" blades going dull faster than the 7-1/4" I have both saws, it may depend on the materials you are cutting or the saw itself. This is not an issue that I have with the blades.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 17, 2016
Answer: 
Hi, Joe - The Diablo D0624R is produced to almost identical tolerances as the D0724R. The only exception is of course the overall size of the blade. However, it is hard to answer your question without further information. Since the D0624R is intended for use on a cordless saw, its life can be compromised by the lack of power draw from older or dying batteries. The more the blade will have to work in the Read More
Hi, Joe - The Diablo D0624R is produced to almost identical tolerances as the D0724R. The only exception is of course the overall size of the blade. However, it is hard to answer your question without further information. Since the D0624R is intended for use on a cordless saw, its life can be compromised by the lack of power draw from older or dying batteries. The more the blade will have to work in the material to complete the cut, will produce extra wear on heat build-up on the carbide teeth. Other factors can include the material being cut can cause accelerated dulling as well. Please reach out to Chris Washington at cwashington@freudtools.com so that he may further understand your issue. Thank you. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Would this blade be appropriate for cross cutting teak boards? The boards are only about .6" thick and 2" wide.

This question is from 6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
Asked by
Portland, ME
Read all my Q&A
March 17, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Yorkville, IL
Read all my Q&A
Home Improvement Profile: DIYer
October 11, 2016
Answer: 
I use it on oak with great success. If you are cross-cutting, you may prefer a finer tooth blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 28, 2016
Answer: 
Hi, MTA - Yes, this blade is appropriate for cross-cutting teak boards.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Other
March 21, 2016
Answer: 
Hi MTA, if your not cutting a lot of boards, this will be fine. I would prefer you were cutting on a table sawing and using a larger blade with more teeth.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
4 answers

Good blade for paneling?

This question is from 6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
Asked by
Massachusetts
Read all my Q&A
January 29, 2016
There are blades with more teeth on them that are designed to cut paneling without tearing it up.

Has anyone cut paneling with this 40-tooth blade successfully?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Yorkville, IL
Read all my Q&A
Home Improvement Profile: DIYer
October 11, 2016
Answer: 
Excellent
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Santa Rosa, CA
Read all my Q&A
May 3, 2016
Answer: 
I used this to cut bead board paneling for a bedroom remodel and it worked great. This blade was recommended for that use by a home depot employee.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 9, 2016
Answer: 
A plywood blade would perform better in paneling than this blade, however, the life will be greatly reduced as plywood blades do not have carbide tips.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Professional
February 1, 2016
Answer: 
Howdy Kurch,
There are saw blades with more teeth that usually do not have the special constrcution of TiCo Hi-Density special-blend carbide, this Diablo 6-1/2 in. circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in plywood.
The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight.
An ultra-slim kerf Read More
Howdy Kurch,
There are saw blades with more teeth that usually do not have the special constrcution of TiCo Hi-Density special-blend carbide, this Diablo 6-1/2 in. circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in plywood.
The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight.
An ultra-slim kerf produces a thin swath for less material removal and fast, effortless operation in dry or wet lumber.
This will do a great job for you.
Happy Cutting,
Coach Dave
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T22:52:20.617-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202035229, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 322ms
  • QUESTIONS, PRODUCT

Customer Reviews

6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade is rated 4.8 out of 5 by 177.
Rated 5 out of 5 by from This blade works very well in the Ryobi skil saw its thin kerf uses less power to cut through thi... This blade works very well in the Ryobi skil saw its thin kerf uses less power to cut through thick boards and stays sharp for many many cuts.
Date published: 2016-11-01
Rated 5 out of 5 by from Almost replaced my ryobi circular saw because it could barely cut through a 2 x 4 after a couple ... Almost replaced my ryobi circular saw because it could barely cut through a 2 x 4 after a couple years of homeowner general use and hobby projects. Decided to try this new blade instead before buying a new saw... it cut through the wood like butter without bogging down. I was quite surprised and realized it was the blade, not the saw. This blade was very impressive... I'm now paying attention to their larger blades for my miter saw.
Date published: 2016-12-09
Rated 5 out of 5 by from Has good kerf so the blade dose not bind, get more cuts per charge with my Porter Cable than most... Has good kerf so the blade dose not bind, get more cuts per charge with my Porter Cable than most other brands. Have several other brands of similar teeth and this blade keeps it sharpness longer. Note: have a Harbor Freight blade sharpener and it drastically extends the life of these blades, however the Diablo goes much longer before requiring any attention. This is one product that you get the bang for your buck.
Date published: 2016-12-09
Rated 5 out of 5 by from I've been using diablo blades for seven years now and every one of them is great, especially when... I've been using diablo blades for seven years now and every one of them is great, especially when you consider the reasonable prices. This is no exception. I use these in my cordless circa-saws for fast trimming and cutting down sheet goods. It leaves a smooth finish requiring only the lightest touch up with a sanding block or plane.
Date published: 2017-01-03
Rated 5 out of 5 by from Been using my saw for several years with the original blade and had been disappointed with it. N... Been using my saw for several years with the original blade and had been disappointed with it. No longer! Installed this new blade and wow, the saw is better than when it was new out of the box! First few cuts in the 3/4 plywood was like cutting warm butter.
Date published: 2016-12-06
Rated 5 out of 5 by from Perfect for Ryobi Battery Circular Saw This blade is far superior to what is originally supplied with the Ryobi circular saw. It will actually extend the battery life as it cuts much more efficiently than the original. Well worth the cost.
Date published: 2016-08-23
Rated 5 out of 5 by from Diablo saw blades are the best power saw blades I have ever used. I use them on my table saw and ... Diablo saw blades are the best power saw blades I have ever used. I use them on my table saw and reciprocating saw. I just wish you made them for my sabre (scroll) saw. Again what a great saw blade.
Date published: 2017-01-10
Rated 5 out of 5 by from The Diablo blades are the sharpest and longest lasting blades i have ever used i have one in ever... The Diablo blades are the sharpest and longest lasting blades i have ever used i have one in every saw i own, highly recommend you try one you will be hooked on the best blade ever!
Date published: 2016-11-30
  • y_2017, m_1, d_24, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_177
  • loc_, sid_202035229, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 256ms
  • REVIEWS, PRODUCT