0008925083634

Diablo

Model D0641R

Internet #202035229

Store SKU #451947

6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade

Frequently Bought Together

Product Overview

Constructed with TiCo Hi-Density special-blend carbide, this Diablo 6-1/2 in. circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in plywood. The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight. An ultra-slim kerf produces a thin swath for less material removal and fast, effortless operation in dry or wet lumber.

  • TiCo Hi-Density titanium carbide composition increases performance and maximizes cutting life
  • Perma-SHIELD nonstick coating reduces drag and shields the blade against heat and friction
  • Laser-cut stabilizer vents absorb noise and vibration, keeping the blade straight and true for superior quality cuts
  • Designed to fit 5/8 in. arbors for accurate blade rotation
  • Ultra-slim kerf provides fast, clean cuts with minimal material removal
  • Laser-cut heat expansion slots ensure wobble-free performance

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

10 Questions25 Answers

Customer Questions & Answers

6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can this blade cut aluminum extrusion, eg- 1 x 1 x 1/16 square tube? Or x 1/8 wall?

This question is from 6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
Asked by
NJ
Read all my Q&A
April 24, 2016
What would be better (for a cordless circular saw. Or a 7 1/4 in miter saw)?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 11, 2016
Answer: 
Hi, RW1257 - The Diablo 6 ½” x 40T blade is not recommended to cut non-ferrous materials. However, we do sell a 6 ½” x 48T metal cutting blade that will cut non-ferrous metals as well. The Part number is D0648F. We do not recommend putting a 7 ¼” blade on a miter saw either. Please either use the D1084L or the D1296L depending if the miter saw is a 10” saw or a 12” saw.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
San Diego, CA, USA
Read all my Q&A
Home Improvement Profile: DIYer
April 25, 2016
Answer: 
This is not a metal cutting blade. You want to look for a blade made to cut non-ferrous metal, that should cut through aluminum.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

6 1/2 Inch blades go dull faster than 7 1/4

This question is from 6-1/2 in. x 24-Tooth Framing Saw Blade
Asked by
Cleveland, Ohio
Read all my Q&A
June 7, 2016
I used Diablo blades in both my 7 1/4 and 6 1/2 circular saws and notice the blades on the 6 1/2 circular saw seem to go dull quicker. Is this because of the design of the smaller thinner blade is not as durable as a 7 1/4 or just the lack of power in the 18 volt saw does have as much power when the the blade goes just a little dull.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Phoenix, AZ
Read all my Q&A
July 5, 2016
Answer: 
I have not had any problems with the 6-1/2" blades going dull faster than the 7-1/4" I have both saws, it may depend on the materials you are cutting or the saw itself. This is not an issue that I have with the blades.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 17, 2016
Answer: 
Hi, Joe - The Diablo D0624R is produced to almost identical tolerances as the D0724R. The only exception is of course the overall size of the blade. However, it is hard to answer your question without further information. Since the D0624R is intended for use on a cordless saw, its life can be compromised by the lack of power draw from older or dying batteries. The more the blade will have to work in the Read More
Hi, Joe - The Diablo D0624R is produced to almost identical tolerances as the D0724R. The only exception is of course the overall size of the blade. However, it is hard to answer your question without further information. Since the D0624R is intended for use on a cordless saw, its life can be compromised by the lack of power draw from older or dying batteries. The more the blade will have to work in the material to complete the cut, will produce extra wear on heat build-up on the carbide teeth. Other factors can include the material being cut can cause accelerated dulling as well. Please reach out to Chris Washington at cwashington@freudtools.com so that he may further understand your issue. Thank you. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Would this blade be appropriate for cross cutting teak boards? The boards are only about .6" thick and 2" wide.

This question is from 6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
Asked by
Portland, ME
Read all my Q&A
March 17, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

March 28, 2016
Answer: 
Hi, MTA - Yes, this blade is appropriate for cross-cutting teak boards.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Other
March 21, 2016
Answer: 
Hi MTA, if your not cutting a lot of boards, this will be fine. I would prefer you were cutting on a table sawing and using a larger blade with more teeth.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Good blade for paneling?

This question is from 6-1/2 in. x 40-Tooth Finish/Plywood Saw Blade
Asked by
Massachusetts
Read all my Q&A
January 29, 2016
There are blades with more teeth on them that are designed to cut paneling without tearing it up.

Has anyone cut paneling with this 40-tooth blade successfully?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Santa Rosa, CA
Read all my Q&A
May 3, 2016
Answer: 
I used this to cut bead board paneling for a bedroom remodel and it worked great. This blade was recommended for that use by a home depot employee.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 9, 2016
Answer: 
A plywood blade would perform better in paneling than this blade, however, the life will be greatly reduced as plywood blades do not have carbide tips.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Professional
February 1, 2016
Answer: 
Howdy Kurch,
There are saw blades with more teeth that usually do not have the special constrcution of TiCo Hi-Density special-blend carbide, this Diablo 6-1/2 in. circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in plywood.
The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight.
An ultra-slim kerf Read More
Howdy Kurch,
There are saw blades with more teeth that usually do not have the special constrcution of TiCo Hi-Density special-blend carbide, this Diablo 6-1/2 in. circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in plywood.
The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight.
An ultra-slim kerf produces a thin swath for less material removal and fast, effortless operation in dry or wet lumber.
This will do a great job for you.
Happy Cutting,
Coach Dave
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-24 T15:30:45.057-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202035229, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 130 reviewers.
Rated 5.0 out of 5.0 by Great saw blade Great smooth cuts,great product to own also good price for the product July 26, 2016
Rated 5.0 out of 5.0 by Business owner One of the best plates of ever used bar none long-lasting I'm a contractor I use it almost every day I'll give it my top rating and I would always buy this particular blade July 5, 2016
Rated 5.0 out of 5.0 by Good Blade This was recommended for cutting bead-board (aka wainscoting) sheets. Cuts were clean and straight through a relatively soft material. Clean enough that joints were invisible after installation. Of course I'm a rank amateur at home projects so take my review with a grain of salt based on my level of inexperience. May 3, 2016
Rated 5.0 out of 5.0 by Cuts like a hot knife through butter I wanted to trim the edges of my 2x6 deckboards and was contemplating on this one or the $10 24T one. I decided to pay an extra $10 and go with this one. I'm glad I did. This blade went through the 2x6s with much ease (really does cut like a hot knife through butter) and with almost laser precision cut on the edges. Really happy with how it turned out. July 31, 2015
Rated 5.0 out of 5.0 by Great Blade I wanted to cut a desktop that I couldn't cut on my saw table. A clean cut was very important. This blade's performance was excellent. March 8, 2016
Rated 5.0 out of 5.0 by Great finish blade I have been cutting 3/4" melamine coated particle board for cabinets. This blade is awesome. I am using it in a Dewalt 20 volt saw. The thin kerf helps the battery life and the 40 tooth blade makes very clean cuts. So far I have made around 40 feet of cut and no noticeable loss of sharpness. Some of the blades with less teeth cause chipping of the melamine coating but not with this one. February 27, 2016
Rated 5.0 out of 5.0 by Blade makes the Saw! Fast, baby-skin smooth crosscuts. This is the one to get! It's a Freud, Stop looking, buy it! July 30, 2013
Rated 5.0 out of 5.0 by Wow, crazy sharp! Very new to wood working. I have a cordless dewalt 20v max circular saw that this blade went on. I've made quite a few cuts with the original blade that comes with the dewalt and after switching to this... the first thing I cut was a 2x12x8 piece of solid oak and WOW, feels like I was cutting through butter! This blade is sharp!!! It completely changed the way my circular saw handles... absolutely fantastic. Love it! December 10, 2015
  • 2016-08-23 T12:21:05.756-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_130, tr_130
  • loc_en_US, sid_202035229, prod, sort_default
2 3 4 5 6 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT