0008925037897

Diablo

Model D0724R

Internet #100008676

Store SKU #793616

7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade

$9.97 /each

Frequently Bought Together

Product Overview

Diablo’s next generation 7-1/4 in. 24-teeth “Tracking Point” saw blades feature the first ever, Tracking Point tooth design and the newly enhanced anti-vibration design. Diablo’s 7-1/4 in. 24-teeth Framing Blade with new Tracking Point tooth design delivers maximum life and durability with effortless cutting performance for five times longer life, two times more durability and increased stability. Up your cutting game with this one-of-a-kind Tracking Point tooth grind for unmatched cutting performance and efficiency. This is the only 7-1/4 in. blade on the market to include Tracking Point Tooth design; making it ideal for framers, roofers, remodelers, concrete formers or anyone wanting ultimate cutting performance in pressure treated wood, 2x lumber, plywood, hardwoods & softwoods.

  • Tracking point tooth design acts as a “rudder” to provide straight cuts and control carbide wear on the tooth for up to five times longer cutting life versus other blades
  • Tracking point doubles the carbide surface area for greater impact resistance and double the durability in nail-embedded wood
  • Tracking point delivers extreme cutting efficiency in corded and cordless saws by offering 65% more cuts per battery charge in cordless saws versus other blades
  • Newly enhanced anti-vibration design provides the ideal combination of stability and rigidity
  • TiCo high-density carbide for maximum cutting life and performance
  • Perma-Shield non-stick coating protects the blade against heat, gumming and corrosion
  • Ultimate framing blade is ideal for both corded and cordless applications
  • Red saw blades are a registered trademark of Freud America, Inc.
  • Up Your Cutting Game! "Tracking Point" Saw Blade Product Features


Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

10 Questions35 Answers

Customer Questions & Answers

7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
 
8 answers

can i cut plexiglass with this blade on a table saw

This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
Asked by
44471
Read all my Q&A
December 4, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
Gulfport,Ms.
Read all my Q&A
Home Improvement Profile: DIYer
September 22, 2015
Answer: 
no
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Brooklyn, NY
Read all my Q&A
May 27, 2015
Answer: 
Not for this blade. It may not be safe. You need to score plexiglass to cut it properly.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Austin, TX
Read all my Q&A
May 19, 2015
Answer: 
I doubt it. You might want to go with a finer blade and avoid possible chipping.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Minden, NV
Read all my Q&A
Home Improvement Profile: Professional
April 9, 2015
Answer: 
I would not consider this blade for plastics. It's a framing blade.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Jasper, GA
Read all my Q&A
March 10, 2015
Answer: 
While you can probably do it, I would recommend a blade with more teeth. It would be better to use a blade designed for laminates and fine finish cutting.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
California City, CA
Read all my Q&A
Home Improvement Profile: DIYer
December 10, 2014
Answer: 
Yes, but you may have to reverse your blade to keep it from grabbing the plexi
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

December 8, 2014
Answer: 
We recommend using the D1084L as it is made for non-ferrous metals and plastics.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Portland, Oregon
Read all my Q&A
Home Improvement Profile: Professional
December 6, 2014
Answer: 
You would probably be better off using a blade with finer teeth but, that blade will cut plexiglass. It may create a rough edge though compared to a blade with small teeth.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
 
8 answers

What is the kerf size on this blade

This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
Asked by
toolman
home
August 13, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
Chandler, AZ
Read all my Q&A
Home Improvement Profile: Other
November 4, 2014
Answer: 
My best guess is 1/16. The blade is really thin and the cut is pretty small. I did not measure the width of the cut, so I am estimating.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

Asked by
Bellingham,WA
Read all my Q&A
Home Improvement Profile: DIYer
September 30, 2014
Answer: 
1/16"
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Read all my Q&A
Home Improvement Profile: Professional
August 9, 2014
Answer: 
I'm not sure what "kerf" is. This blade fits on all saws with the common 5/8 drive
-15points
1out of 17found this answer helpful.
Was this helpful?helpful1unhelpful16

Asked by
Newberry Springs, CA
Read all my Q&A
August 5, 2014
Answer: 
Never measured it but it is fairly thin. For general construction/rough carpentry it isn't an issue.
-7points
0out of 7found this answer helpful.
Was this helpful?helpful0unhelpful7

Asked by
Auburn, MI 48611, USA
Read all my Q&A
January 15, 2014
Answer: 
1/8"
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4

Asked by
Westminster, CO, USA
Read all my Q&A
January 14, 2014
Answer: 
The kerf size is .0059"
0points
3out of 6found this answer helpful.
Was this helpful?helpful3unhelpful3

August 15, 2013
Answer: 
The kerf size on the Diablo 7-1/4" 24T framing saw blade is .059".
+4points
8out of 12found this answer helpful.
Was this helpful?helpful8unhelpful4

Asked by
Cosby, TN 37722, USA
Read all my Q&A
August 13, 2013
Answer: 
Just a skosh under 1/8' or right on it.
0points
3out of 6found this answer helpful.
Was this helpful?helpful3unhelpful3
This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
 
7 answers

How wide is the cut 1/32, 1/16 ,1/8 ,1/4

This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
Asked by
Read all my Q&A
September 28, 2014
how much wood is removed per cut 1/64, 1/32, 1/16, 1/8, 3/16 they have question that was asked what is the kerf but it has conflicting answers see picture
User submitted photo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Chandler AZ
Read all my Q&A
Home Improvement Profile: DIYer
August 14, 2015
Answer: 
It is almost 1/16" (.059") This thin and only 7-1/4" it does not tax tax your table saw. And at $20 it is a great blade to have around. The thin kerf also keeps waste low. If a am ripping 1/4" strip from a 4" wide board , I get get 10 with an 1/8" kerf blade. or 13 with this blade.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Fayetteville ga
Read all my Q&A
February 25, 2015
Answer: 
It is just about 1/8" could be a hair under I haven't measured but definitely not more than an 1/8"
-7points
0out of 7found this answer helpful.
Was this helpful?helpful0unhelpful7

Asked by
California City, CA
Read all my Q&A
Home Improvement Profile: DIYer
December 10, 2014
Answer: 
1/8"
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4

Asked by
Chandler, AZ
Read all my Q&A
November 4, 2014
Answer: 
I did not measure the wood removed. But, I would estimate that it was approximately 1/16. The blade is very thin and the cut was small.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

October 3, 2014
Answer: 
The closest common fraction is 1/16th. The blade's kerf is .059. The closest common fraction is 1/16th.
+5points
6out of 7found this answer helpful.
Was this helpful?helpful6unhelpful1

Asked by
Bellingham,WA
Read all my Q&A
Home Improvement Profile: DIYer
September 30, 2014
Answer: 
The kerf is 1/16".
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Ebony, VA
Read all my Q&A
Home Improvement Profile: Professional
September 29, 2014
Answer: 
It is actually 3/32". The saw blade blank is 1/16" and the carbide tips that are brazed on are 3/32" wide, so the total width of the saw kerf is 3/32" + or - a hair. A traditional saw blade blank that you will find on a table saw is about 3/32" and the carbide tips are 1/8" wide. That may be where you will find some confusion.
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0
This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
 
3 answers

Can Diablo circular saw blades be sharpened?

This question is from 7-1/4 in. x 24-Teeth Tracking Point Framing Saw Blade
Asked by
Thousand Oaks, CA
Read all my Q&A
April 27, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

May 11, 2016
Answer: 
Hi, Froggle - Diablo saw blades can be re-sharpened up to 3-5 times on an average by a certified re-sharpener. However, sometimes due to the cost of re-sharpening versus purchasing a new blade, it will sometimes be cheaper to purchase a new blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 29, 2016
Answer: 
Yes, the circular saw blades can be sharpened.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: Professional
April 29, 2016
Answer: 
Hello Froggle, good question & Yes they can be. Also Diablo has listed Centers for just that thing. I've included a link for you. Great Saw Blades BTW! Hope this Helped.
Link: http://www.diablotools.com/sharpening
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-09-08 T12:44:48.948-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100008676, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 383 reviewers.
Rated 5.0 out of 5.0 by Best blades out there I was first exposed to Diablo circular saw blades over 10 years ago and have been running them ever since. High quality, durable, no vibration clean cutting, cuts thru wood smooth as silk. I was lucky enough to find this blade in the 2 pack promo set. I used it to replace the stock blade on my cordless 18 volt brushless Ridgid circular saw, not only does it give me better cuts but it has also increased my battery runtime. If your looking for a high quality replacement blade look no further. August 9, 2016
Rated 5.0 out of 5.0 by best bang for the buck every time! great cut, long lasting, great price... Diablo has always been a solid blade. Look at all it has cut this year! Just 2 blades! June 21, 2016
Rated 5.0 out of 5.0 by As Advertised Works as advertised. Cuts great. No issues so far. August 9, 2016
Rated 5.0 out of 5.0 by Best saw blades It's beyond noticeable difference on quality, price and durability. This company makes the best saw blades and it's kinda fun just using them because you wonder how they will take a beating. They cut fast too. I ripped 212' of board in less than an hour. I finally killed my first blade after I ripped through asphalt shingles and roof sheathing while cutting back for a ridge vent. I felt kinda bad for destroying the blade and so far haven't had the heart to discard the blade because it belongs in a hall of fame or something for as much as I used it. Asphalt shingles are not good for saw blades... :) June 18, 2016
Rated 5.0 out of 5.0 by Smooth cut Best blade for the price. Lasts a long time also. Framing blade and PT blade is best I've used June 5, 2016
Rated 5.0 out of 5.0 by Diablo blade Its an awesome blade fast effective, and precise. I highly recommend the listed blade and consider purchasing it again June 7, 2016
Rated 5.0 out of 5.0 by Circular saw blade Received a new circular saw as a gift, it wouldn't cut straight (even with a speed square) before returning the saw decided to try a new blade, purchased a new Diablo 7-1/4 x 24 teeth blade and problem solved. The Diablo cuts wet pressure treated 2 x's with ease. June 4, 2016
Rated 5.0 out of 5.0 by Awsome blade The blade as I would have expexted did not dull after 5 hours of use May 10, 2016
  • 2016-09-21 T16:39:15.149-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_383, tr_383
  • loc_en_US, sid_100008676, prod, sort_default
2 3 4 5  ... 14 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT