0008925037903

Diablo

Model # D0740R

Internet # 100017783

Store SKU # 793618

7-1/4 in. x 40-Tooth Finish Saw Blade

$14.97 /each

Frequently Bought Together

Product Overview

The advanced laser-cut slim kerf on the Diablo 7-1/4 in. x 40-Tooth Finishing Saw Blade creates a thin swath for less material removal and fast, effortless operation. Constructed with TiCo Hi-Density special-blend carbide, this durable circular saw blade is outfitted with 40 teeth to make smooth, finely finished cuts in wood and plywood. The Perma-SHIELD nonstick coating reduces drag while stabilizer vents absorb noise and vibration to keep the blade straight.

  • Laser-cut heat expansion slots foster true and straight cutting
  • Perma-SHIELD non-stick coating protects against heat, gumming and corrosion
  • TiCo high-density titanium carbide composition increases performance and maximizes cutting life
  • Fashioned with 5/8 in. laser-cut arbor for accurate blade rotation
  • Laser-cut stabilizer vents trap noise and vibration, keeping the blade straight
  • Blade won't bog down when sawing damp wood

Specifications

Dimensions

Product Depth (in.) 
0.19 
Product Height (in.) 
8.69 
Product Width (in.) 
7.44 
Saw Blade Diameter (in) 
7-1/4 

Details

Arbor Size 
0.625 In. 
Color Family 
Red 
Color Family 
Red 
Material Cut 
Wood 
Number in Package 
Number of Teeth 
40 
Power Tool Accessory Type 
Circular Saw Blade 
Power Tool Product Type 
Power Tool Accessory 
Returnable 
90-Day 
Saw Blade Material 
Carbide 
Tools Product Type 
Power Tool 

More Products With These Features

Search

Customer Questions & Answers

27 Questions88 Answers

Customer Questions & Answers

7-1/4 in. x 40-Tooth Finish Saw Blade
7-1/4 in. x 40-Tooth Finish Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Butcher Block

This question is from 7-1/4 in. x 40-Tooth Finish Saw Blade
Asked by
Read all my Q&A
July 8, 2016
How is this blade cutting through 1-1/2" butcher block? Should I go with a 60 tooth instead?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

July 12, 2016
Answer: 
Hi, Mike - You will get the best performance and finish from the D0740R. Given the thickness of the material being cut, the 60 tooth blade will cause minor burning or burnishing on the finished edge. The D0740R will have the correct amount of teeth working in the material to generate the best finish.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Hampshire
Read all my Q&A
Home Improvement Profile: Professional
July 11, 2016
Answer: 
Hey Mike!
1 1/2" should be no problem for either of these blades. I was just in the 3402 store this weekend and the 40 tooth was on an end cap for a good price! The extra 5 bucks would get you the 60. It is just a question if you want the finer cut or not.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Hulett, Wy.
Read all my Q&A
Home Improvement Profile: Professional
July 10, 2016
Answer: 
The 40 tooth will cut the Maple 1 1/2" Butcher Block just fine. A 60 tooth would be likely to heat up, and you could have some burnt edges to clean up. Go at a steady feed, but try to allow the blade to clean as you feed it (I always have my depth set up so I can see the bottom of the gullet at the bottom of the cut) HAPPY SAW DUST !!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Will this blade handle light aluminum cuts?

This question is from 7-1/4 in. x 40-Tooth Finish Saw Blade
Asked by
Read all my Q&A
June 13, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
New Hampshire
Read all my Q&A
Home Improvement Profile: Professional
July 1, 2016
Answer: 
Hey Greg, I was just looking for a saw blade when I saw the 70 tooth D0770F non ferrous metal cutting. I first saw the D0756F 56 tooth non ferrous blade. Good Luck
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 29, 2016
Answer: 
Hi, Greg - We do not recommend using the D0740R for cutting light aluminum. The D0740R is not designed to cut non-ferrous materials. The D0756N is designed to cut non-ferrous material including aluminum, brass, and copper.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Hampshire
Read all my Q&A
Home Improvement Profile: Professional
June 15, 2016
Answer: 
Hey Greg, The Diablo blade listed for laminate and non ferrous metals is the 56 tooth Diablo Model # D0756N Home Depot numbers: Internet # 202035231 Store SKU # 517197
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Is this good for cutting composite deck boards?

This question is from 7-1/4 in. x 40-Tooth Finish Saw Blade
Asked by
Read all my Q&A
May 19, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

May 25, 2016
Answer: 
Hi, Casey - The Diablo D0740R will cut composite decking material. However, for life and quality of cut, we recommend using the Diablo D0744CD specially designed for composite decking boards.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 21, 2016
Answer: 
No, The Diablo 40-tooth is a good blade for general cutting of wood, decking and all pressure treated wood. It makes a good finish cut with little or no Saw Kurf Swirls as in general purpose blades. It will eventually gum up after using on composite wood. When this happens the cuts on the composite wood looks like it melted because of the heat generated while cutting. Composite woods products require a Read More
No, The Diablo 40-tooth is a good blade for general cutting of wood, decking and all pressure treated wood. It makes a good finish cut with little or no Saw Kurf Swirls as in general purpose blades. It will eventually gum up after using on composite wood. When this happens the cuts on the composite wood looks like it melted because of the heat generated while cutting. Composite woods products require a little higher tooth count and blade design. Diablo makes a blade, 7-1/4 in. x 44 Tooth Composite Material/Plastics TrexBlade that is idea for cutting composite woods. When you get to the composite part of your project just change out the blade and you are set to go for the professional look! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Hampshire
Read all my Q&A
Home Improvement Profile: Professional
May 21, 2016
Answer: 
Hi Casey, The way I keep straight on blade selection is to go to the Home Depot site and punch in 7 1/4 Diablo Blade in the search bar. I have done it at home or used the kiosk in the store. There you will find a blade for just about any building material out there.
It saves me time by entering my zip code to check availability at my local store and gives the aisle and bay location!
Hey, I'm right
Read More
Hi Casey, The way I keep straight on blade selection is to go to the Home Depot site and punch in 7 1/4 Diablo Blade in the search bar. I have done it at home or used the kiosk in the store. There you will find a blade for just about any building material out there.
It saves me time by entering my zip code to check availability at my local store and gives the aisle and bay location!
Hey, I'm right here so here it is: Diablo Model # D0744CD
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Witch Diablo saw blade would work the best for tongue and groove flooring

This question is from 7-1/4 in. x 40-Tooth Finish Saw Blade
Asked by
Read all my Q&A
May 16, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

May 23, 2016
Answer: 
Hi, Ronnie - The Diablo D0760R #618-952 7-1/4” 60T Ultra Finish blade will deliver clean cuts in hardwoods and the Diablo D0756N #517-197 7-1/4” 56T Laminate/Non-Ferrous blade will deliver clean cuts in laminate flooring.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 21, 2016
Answer: 
Depending on the width of your wood an electrical miter box is the preferred method for cutting tongue and groove. With specialty wood widths wider that six inches you want to use the highest tooth count that will fit your circular saw. Diablo makes a wide selection of blades,10 in. x 60 Tooth and 10 in. x 80 tooth, that fit most miter boxes that are carried at Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Hampshire
Read all my Q&A
Home Improvement Profile: Professional
May 17, 2016
Answer: 
Hey Ronnie, I wondered about that too! The nice man in the hardware section of Home Depot suggested I go on the Home Depot site and punch in 7 1/4 Diablo Blade in the search bar. It gave a good description of what the different blades do. I do know from experience that more teeth means a finer cut but found out that you can cut almost anything with their selection! Good luck and happy hunting!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-07-23 T16:56:06.549-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100017783, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 170ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 73 reviewers.
Rated 5.0 out of 5.0 by Great purchase I bought this blade for a cut I needed to on a new countertop. I also added some blue tape so the finish wouldn't chip. The combo of the new blade and tape worked like a charm. July 19, 2016
Rated 5.0 out of 5.0 by Excellent ripping saw blade Ripping sheets of anything with the blade that came with my plug in circular saw was a test of patience. The saw wanted to walk away from the straight edge and it was difficult for the saw to make the cut. Putting this blade on the same saw was like getting a completely different saw. Cut through materials with little effort and easy to keep on the straight edge. Made cutting 3/4" particle board like cutting butter. February 23, 2016
Rated 5.0 out of 5.0 by Best blade on the market Long lasting, smooth and fast cutting. We use these everyday July 19, 2016
Rated 1.0 out of 5.0 by Doesn't work on my circular saw This product seems to be high quality; however, it's kerf is too thin for my SKIL circular saw so it stops spinning soon after I engage it in a cut. I can't use it unless I shim it somehow, so I am now using the original blade that came with my saw again. June 28, 2016
Rated 5.0 out of 5.0 by Cuts like crazy I bought a new blade from Harbor Freight and it was so bad i thought my saw was just too old. Gave it one more try with this Diablo and cut like butter. July 20, 2016
Rated 5.0 out of 5.0 by High quality Excellent blade. Now that I have tried it I will not use any other blades on my saws! June 28, 2016
Rated 5.0 out of 5.0 by Great Blades I swear by Diablo blades. My miter, cordless, and table saw all have diablo blades in them. I bought this blade for my miter saw, because I was going to be cutting some moldings and I wanted the cut to be as clean as possible... The blades performed as expected. June 21, 2016
Rated 5.0 out of 5.0 by Needed a large blade for LP Smartside installation This blade worked well with LP Smartside and made clean cuts June 29, 2016
  • 2016-07-21 T14:46:04.880-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_73, tr_73
  • loc_en_US, sid_100017783, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 91ms
  • REVIEWS, PRODUCT