0008925020462

Diablo

Model D0748F

Internet #100098833

Store SKU #255290

7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade

Frequently Bought Together

Product Overview

Made of tungsten-titanium carbide, the Diablo 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade was designed to withstand the impact of cutting through metal to give you a long-lasting solution. It has a Triple Chip cutting grind to maximize speed and durability. This blade was designed to fit all 5/8 in. bores.

  • Designed to fit all 5/8 in. bores
  • Cuts mild steel up to 1/4 in. thick
  • Constructed of tungsten titanium carbide for durability
  • Tri-metal brazing system that allows the carbide tips to withstand extreme impact for maximum flexibility
  • Laser-cut stabilizer vents for reduced vibration and precise cuts

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

15 Questions19 Answers

Customer Questions & Answers

7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
 
2 answers

I am cutting corrugated galvanized roofing sheets, 26 in wide and about 20 cuts. with this work well or should I go with a grinding wheel?

This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
Asked by
Read all my Q&A
June 22, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

July 10, 2016
Answer: 
galvanized roofing is an inferior product. Cold cuts are considered a necessary for the pros because heat makes the zinc evaporate and you end up with rusted edges. Zinc melts at 780F and turns into gas at a mere 1665F.
Please make america great again and consider using aluminum or stainless.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Professional
June 23, 2016
Answer: 
Howdy Harvey,
If you are using a circular saw it will most likely be a chore. A table saw could work but still have mixed results.
A saber saw or jigsaw would work better but be very loud.
The best way is to use a cutting wheel/diamond blade on a grinder. These have a much faster speed and are quieter.
Happy cutting,
Coach Dave
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
 
2 answers

Can this blade cut stainless steel ?

This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
Asked by
Read all my Q&A
May 12, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 23, 2016
Answer: 
Hi, Shem - We do not recommend using this blade to cut Stainless Steel. This blade is intended for Mild Steel only.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 12, 2016
Answer: 
This can cut steel.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
 
2 answers

Can the Diablo 48 teeth Do748f capable of cutting a steel door with wood on the inside? thanks

This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
Asked by
Wareham, MA
Read all my Q&A
March 4, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

March 8, 2016
Answer: 
Hi, Danny - Yes, the D0748F is capable of cutting a steel door with wood on the inside.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

March 5, 2016
Answer: 
Yes, this will work.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
 
2 answers

Would this metal cutting blade cut the bottom off a compressed gas cylinder?

This question is from 7-1/4 in. x 48-Tooth Steel Demon Ferrous Metal Cutting Saw Blade
Asked by
Washington
Read all my Q&A
September 26, 2015
Cylinder is 9 1/2 inches in diameter, steel is approx 3/8 inches thick. (As a side note...ALL safety precautions regarding cutting cylinders are taken.)
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Texas, USA
Read all my Q&A
Home Improvement Profile: DIYer
September 29, 2015
Answer: 
Assuming the tank is no longer compressed, this blade would work well for cutting through the tank wall. You would have to rotate the tank around the blade on a table saw though, so it would require a jig of some kind to keep the tank steady and straight as you rotate it. Alternately, you could make multiple passes on the blade against a fence. This blade eats steel for lunch. Oh, and wear goggles... Read More
Assuming the tank is no longer compressed, this blade would work well for cutting through the tank wall. You would have to rotate the tank around the blade on a table saw though, so it would require a jig of some kind to keep the tank steady and straight as you rotate it. Alternately, you could make multiple passes on the blade against a fence. This blade eats steel for lunch. Oh, and wear goggles... really. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

September 29, 2015
Answer: 
The D0748F is only rated to cut steel that has up to ¼” wall thickness. Based on the thickness listed, the D0738F would be a better choice.
However, a carbide recip blade for metal cutting (DS0608CF, DS0908CF, DS1208CF) would be the best option if you have a reciprocating saw.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
2 »
  • 2016-09-08 T11:58:40.020-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100098833, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 169ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 36 reviewers.
Rated 1.0 out of 5.0 by Not very good We use a lot of the Diablo blades in our work and they work well but have found this particular metal cutting blade to be inferior to others. We typically use a Lennox blade for our metal cutting and hopefully will not find ourselves short and needing to purchase any of these again. It took 3 of these blades to complete what one Lennox blade would do for the same money September 6, 2016
Rated 2.0 out of 5.0 by Fast at First I used the blade to cut rebar. It worked fine for the first 10 cuts and then quickly wore down. I'll go back to using a metal blade on my reciprocating saw. September 6, 2016
Rated 5.0 out of 5.0 by Cutting Steel Door to Size I bought this to cut down a steel exterior door and frame instead of buying a custom door. I was shocked at how smooth the cut was. I expected some roughness on the edges but was surprised that it cut the steel as if the door had been made of wood. I will definitely find more uses for it now that I know what it is capable of. August 23, 2016
Rated 5.0 out of 5.0 by Saw blade It preformed well for cutting .060 steel sheets. I would buy again July 19, 2016
Rated 2.0 out of 5.0 by cut 10 feet of 1/8 inch mild steel I am not sure if I expected to much or not, but this blade quit cutting after I made 10 feet of cuts in 1/8 inch steel fence posts. I started out working fine, but my job was half done. June 29, 2016
Rated 5.0 out of 5.0 by Sick saw blade!! This thing should be called the steel beaver cause it just chews through steel! June 29, 2016
Rated 5.0 out of 5.0 by My Favorite Blade This is my favorite saw blade of all my blades. I cut a lot of steel for different projects and this blade just amazes me every time I use it. This thing cuts through 1/8" steel like a regular blade through pine wood. Its amazing!!! I've used this blade on my Shopsmith table saw (works great), on my Skill circular saw (works great) and even with my work drive circular saw where it works great! I'm actually on my 3rd one of these now because I get SO much use out of them, but I've also been using them for years now. DO use safety goggles though as these do tend to make a lot of hot metal shavings that like to go flying towards your face. January 9, 2015
Rated 1.0 out of 5.0 by Choose materials you cut very carefully I bought this blade two days ago. I purchased the blade locally as it seemingly was the best blade for the material I was to cut (2 inch GRC 1/8" wall). The blade preformed well initially. After 5 cuts I began to notice rounding of the teeth. After 20 cuts the blade is all but useless. The blade was mounted in a miter saw in perfect conditions. Although this is not the specific recommendation. The saw runs at 5000 rpm, well below the safety threshold. I expected that a blade recommend for angle iron would preform well on mild steel GRC. I was incorrect! I have found that Diablo also sells a 36 tooth variant of this blade but I am hesitant to purchase it due to the fact it contains the same teeth and kerf design but advertises 3/8" cut capacity. June 19, 2016
  • 2016-09-08 T12:23:36.940-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_36, tr_36
  • loc_en_US, sid_100098833, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT