Rated 5.0 out of 5 by 17
Rated 5.0 out of 5.0 by Saddlebum Does everything it claims!
I bought this saw blade to cut a ten foot conference room table that has a laminate top and bottom and is 1+1/4" of epoxy and compressed sawdust in the center. A very difficult material to cut. The Diablo blade went through it with no problem at all. I stopped every two feet to check the temperature of the blade and it was just slightly warm. The final cut left both laminates clean and neat. The Diablo exceeded my expectations (and that doesn't happen very often).
February 10, 2016
Rated 5.0 out of 5.0 by goodreason Nice Quality Blade
Been using different kinds of Diablo blades for well over a year. When the opportunity came up to try the non-ferrous/ blade there wasn't a question or not to try it. Tested it on different plastic pipes ranging from 1/2” to 2” with the same results and it performed as expected a very clean cut. The well designed and crafted blade has numerous laser cuts for heat expansion, thin kerf design, stabilizer vents, and heat expansion slots to make this one of the very best blades on the market. While, at the same time extending the life of the blade, which could be a mute point because it's guaranteed for life, with of course exceptions.
July 28, 2014
Rated 5.0 out of 5.0 by Dale Smooth cut
I recently replaced the thin plastic on the side light windows on my front door with 1/8 clear acrylic. The cuts were smooth and easy, making this job so quick and satisfying .
August 1, 2014
Rated 5.0 out of 5.0 by Papaw Unbelieavable Blade / Awesome!
We needed a blade to cut thru 18 guage metal and this blade handled it perfectly. And with the need to also cut plastic roofing, all we had to do was to turn the blade around to cut the plastic. Best purchase.
January 5, 2016
Rated 5.0 out of 5.0 by TTJr7 Very impressed
When I was searching for the right blade to cut down large pieces of scrap aluminum and alloys I looked to see what diablo offered. I've used diablo sawzall blades for some years and I've been amazed how much better they handle hard metals such as stainless. I came across this skill saw blade and I honestly didn't want to pay this much money for a single blade to cut soft metals but having past success with diablo I decided to give it a try. The results were nothing short of awesome. Some of the scrap was more than an inch thick but it was no problem at all for this blade. By the end of it all I had more than a pound of shavings from this blade slicing like a CNC machine. No binding, no clogging, and still cutting just as fast as if it was new. After working with this I'm looking to see all the blades I can replace with diablo
April 14, 2015
Rated 5.0 out of 5.0 by AJAY Smooth-cutting, multi-purpose blade
One benefit of using a multipurpose blade is you can move from cutting wood, to plastic to man-made composites without changing the blade. Previously I have used a traditional framing blade for rough lumber and cut-off wheels for plastic and light metals. With this blade you can do both and end up with a nice smooth edge. I think the increased number of teeth help a lot too. As long as you don't cut heavy metals (those that contain iron) it appears this blade will last a long time.
September 10, 2014
Rated 5.0 out of 5.0 by DrDave An Incredibly Useful Blade!
I've had this blade for almost six months now. I wanted to put it through its paces before I rated it. I've used it to cut composite decking material and the cuts were nice and clean, without the ragged ends you often get. I moved on and cut a lighter wood lattice work to frame out the underside of my deck. My previous lattice had been cut with a wood blade, and this one put it to shame. The cuts were clean, consistent and straight. I cut some pvc pipe and some heavy aluminum pipe to route my outdoor spigot under the deck, and again this blade cut right through the materials without bucking or bending, and the cuts were extremely clean and even. I later cut up an old 2x4 to make some small blocks for a trailer and for my motorcycle in the trailer. The blade didn't even break a sweat.
This blade is truly a multipurpose blade. It handles a variety of materials with equal aplomb. It is sharp, buts evenly and true, and with its lifetime guarantee, simply can't be beat by any other blade I've ever used or seen.
January 5, 2015
Rated 5.0 out of 5.0 by East The right tool for job
I purchased this blade to cut aluminum soffit and the Diablo blade did an excellent job, with no tearing or bending. I had no trouble with the performance of this blade. Stayed sharp and cut clean through a long project. I would highly recommend it.
November 4, 2014