Model # D0756N

Internet #202035231

Store SKU #517197

Diablo 7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade
0008925085669

Diablo

7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade

$42.97 /each

Frequently Bought Together

Product Overview

Get durability and longevity during heavy-duty use with the Diablo 7-1/4 in. x 56-Tooth Laminate/Non-Ferrous Metal Cutting Blade. It was made of Freud TiCo high-density carbide that is thin yet strong. The Perma-SHIELD non-stick coating reduces friction and pitch buildup to provide a smooth, accurate cut.

  • Multi-purpose for various projects
  • Works with non-ferrous metals, laminates and plastics
  • Freud-made TiCo high-density carbide for a long cutting life and ultra-fine finish
  • Laser-cut thin kerf design for fast, clean cuts
  • Perma-SHIELD non-stick coating for protection against heat, gumming and corrosion
  • Laser-cut stabilizer vents for trapping noise and reducing vibration to give you accuracy and durability

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

26 Questions52 Answers

Customer Questions & Answers

7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade
7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Can the Diablo 7-1/4 x 56 blade be sharpened?

This question is from 7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade
Asked by
California
Read all my Q&A
October 14, 2016
Where can I get these blades sharpened?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 25, 2016
Answer: 
Ne,
Depending on the wear on the blade, yes it can be resharpend at a certified center.
If you go to www.diablotools.com and click on the link that says sharping you will find a list of certified sharpeners.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

can I use this to cut 26 gauge roofing tin?

This question is from 7 1/4 in. x 56 Tooth Laminate/Non-Ferrous Metal Cutting Blade
Asked by
Read all my Q&A
July 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 28, 2016
Answer: 
Hi, Mark - For your intended use, we recommend using the Diablo 7 ¼” 70 Tooth Steel Demon blade (D0770F), which is designed for thin gauge metals. The D0770F is ideal for smooth clean cuts in thinner material.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Need to cut extruded, 13/16" thick, composite decking made up of 60% bamboo/40% Plastic... OK for this?

This question is from 10 in. x 80-Tooth Non-Ferrous / Plastic Cutting Saw Blade
Asked by
Read all my Q&A
September 1, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

September 14, 2016
Answer: 
Hi, Brett - we recommend using the D1072CD as it is specifically designed for composite deck material such as Trex.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Aromas, CA
Read all my Q&A
Home Improvement Profile: DIYer
September 6, 2016
Answer: 
This blade should work for your intended use.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Would this be the right blade to cut thick HDPE?

This question is from 10 in. x 80-Tooth Non-Ferrous / Plastic Cutting Saw Blade
Asked by
Columbia, SC
Read all my Q&A
June 29, 2016
I need to cut 1 inch thick HDPE cutting board material into several pieces. TCG with a negative hook angle is what I want, but 80 teeth seems like a lot for something this thick
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 12, 2016
Answer: 
Hi, Mike - The Diablo D1080N will be ideal blade to use because of its TCG tooth design and -5 degree hook angle. We recommend raising the blade in the material so that approximately 1” of the blade is exposed. This will minimize the amount of teeth working in the material minimizing the potential of marking the material.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-10-30 T22:50:29.967-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202035231, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 86ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 87 reviewers.
Rated 5.0 out of 5.0 by Does everything it claims! I bought this saw blade to cut a ten foot conference room table that has a laminate top and bottom and is 1+1/4" of epoxy and compressed sawdust in the center. A very difficult material to cut. The Diablo blade went through it with no problem at all. I stopped every two feet to check the temperature of the blade and it was just slightly warm. The final cut left both laminates clean and neat. The Diablo exceeded my expectations (and that doesn't happen very often). February 10, 2016
Rated 5.0 out of 5.0 by Nice Quality Blade Been using different kinds of Diablo blades for well over a year. When the opportunity came up to try the non-ferrous/ blade there wasn't a question or not to try it. Tested it on different plastic pipes ranging from 1/2” to 2” with the same results and it performed as expected a very clean cut. The well designed and crafted blade has numerous laser cuts for heat expansion, thin kerf design, stabilizer vents, and heat expansion slots to make this one of the very best blades on the market. While, at the same time extending the life of the blade, which could be a mute point because it's guaranteed for life, with of course exceptions. July 28, 2014
Rated 5.0 out of 5.0 by Smooth cut I recently replaced the thin plastic on the side light windows on my front door with 1/8 clear acrylic. The cuts were smooth and easy, making this job so quick and satisfying . August 1, 2014
Rated 5.0 out of 5.0 by Unbelieavable Blade / Awesome! We needed a blade to cut thru 18 guage metal and this blade handled it perfectly. And with the need to also cut plastic roofing, all we had to do was to turn the blade around to cut the plastic. Best purchase. January 5, 2016
Rated 5.0 out of 5.0 by Great blade I bought this blade for my dewalt sliding miter saw to cut hurricane panels and it did not disappoint, after over 500 cuts through panels, studded angle and H header it still cut like brand new. The cuts were very smooth and I did not have to file at all, looked as good as if the panels were sheared. I would absolutely recommend this blade for aluminum cutting. October 16, 2016
Rated 2.0 out of 5.0 by Saw blade One tooth breaks off 50% of the time other thenthat cuts ok October 25, 2016
Rated 4.0 out of 5.0 by Excellent Works great! We had no complaints and we'll use the same brand in the future if needed. October 15, 2016
Rated 5.0 out of 5.0 by cuts like a hot knife through butter Used for my crown molding install. Cuts are clean. Will use same blade for my hardwood, will add more detail to see how long it lasts. October 5, 2016
  • 2016-10-30 T20:59:56.771-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_87, tr_87
  • loc_en_US, sid_202035231, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 44ms
  • REVIEWS, PRODUCT