0008925067634

Diablo

Model D0760R

Internet #100627136

Store SKU #618952

7-1/4 in. x 60-Tooth Fine Finish Saw Blade

$19.97 /each

Frequently Bought Together

Product Overview

Get fast, accurate cuts in wood and plywood. The Diablo 7-1/4 in. x 60-Tooth Fine Finish Saw Blade contains Perma-SHIELD non-stick coating to protect against heat, gumming and corrosion. The blade was constructed from TiCo high-density carbide for durability and strength.

  • Cuts wood and plywood cleanly and accurately
  • 5/8 in. laser-cut arbor for accurate blade rotation
  • TiCo high-density carbide to increase performance and maximum cutting life
  • Laser-cut heat expansion slots for true and straight cutting
  • Perma-SHIELD non-stick coating for protection against heat, gumming and corrosion

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

12 Questions39 Answers

Customer Questions & Answers

7-1/4 in. x 60-Tooth Fine Finish Saw Blade
7-1/4 in. x 60-Tooth Fine Finish Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
 
6 answers

Would this be ideal for cutting acrylic plastics?

This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
Asked by
Read all my Q&A
June 5, 2016
Looking to see if this blade can cut acrylic on an beveled angle or cut a small groove into 1/8 inch plastic
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Branchland, West Virginia 25506
Read all my Q&A
Home Improvement Profile: DIYer
August 22, 2016
Answer: 
I don't know
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 29, 2016
Answer: 
Hi, ThisGuy - The Diablo D0760R will cut acrylic and plastics. However, if using this blade to cut acrylic, we recommend using a sacrificial piece of wood or tape on the back side of the cut. Also, you should set the correct depth on the saw, the blade should go through the material with no more than 1/8” of the blade showing in the bottom of the cut. This will allow for the most teeth working in the Read More
Hi, ThisGuy - The Diablo D0760R will cut acrylic and plastics. However, if using this blade to cut acrylic, we recommend using a sacrificial piece of wood or tape on the back side of the cut. Also, you should set the correct depth on the saw, the blade should go through the material with no more than 1/8” of the blade showing in the bottom of the cut. This will allow for the most teeth working in the material to get the best cut possible.
We also recommend that you look at blades dedicated to cutting plastics and acrylics, such as the Diablo D0756N and the AvantiPRO P07140R. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tonganoxie KS
Read all my Q&A
June 7, 2016
Answer: 
The answer is, maybe. Feed rate is very important when cutting plastics using a blade meant for cutting wood. Too slow and the plastic will soften and gum up the blade. Best blade is 80 tooth carbide triple-chip design. An 80 tooth alternate top bevel (ATB) blade, either cross cut or plywood style is a good alternative for the occasional user.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Oswego, ILL
Read all my Q&A
Home Improvement Profile: DIYer
June 7, 2016
Answer: 
YOU SHOULD USE A FINE TOOTH BLADE TO DO THAT.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Canton, GA
Read all my Q&A
June 7, 2016
Answer: 
Can't speak for acrylic plastics, unfortunately, but this is one of the best blades I've ever used. I would certainly give it a try on the plastic.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Seattle, WA
Read all my Q&A
June 7, 2016
Answer: 
This blade is really meant for wood, but it will definitely cut acrylic if you push the saw slowly to avoid chipping. The cut will not be as smooth as using a router with high speed rotation and bit meant for acrylic, so you'll have a foggy cut edge if it matters.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
 
6 answers

Would this product work well with Aluminum window screen frames?

This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
Asked by
The real Desert
Read all my Q&A
November 2, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Bothell
Read all my Q&A
August 24, 2016
Answer: 
Not for very long. There are specialty metal cutting blades that are a bit more expensive but seriously do the job on aluminum.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Branchland, West Virginia 25506
Read all my Q&A
Home Improvement Profile: DIYer
August 23, 2015
Answer: 
I wouldn't use this blade to cut aluminum. I would always use a hacksaw with 32 teeth to cut aluminum. Providing you can get in a good position. I have cut aluminum by turning the blade the opposite direction and go a little slower than usual. Definitely not with a carbide tip blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
North Texas
Read all my Q&A
Home Improvement Profile: DIYer
July 16, 2015
Answer: 
Yes. However, since the aluminum is very soft and the carbide tips are very sharp, you need to use a slow feed with a firm grip on the piece so you get a smooth cut. With a high feed rate, a saw tip may get too large a bite and tend to grab the metal or tear out chunks.
I assume that you want to make cross cuts or angled cuts for corners.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Salt Lake City
Read all my Q&A
Home Improvement Profile: Professional
April 8, 2015
Answer: 
I haven't personally tried this blade with aluminum but using a carbon blade normally works quite well- I'd probably give it a shot if I didn't have a skinnier band-saw type blade handy- for me, aluminum, skinnier blades are easier to work with so long as they don't clog.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 17, 2014
Answer: 
This blade is not ideal for cutting aluminum window screen frames. We recommend using the D0756N.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Flowery Branch, GA, USA
Read all my Q&A
Home Improvement Profile: DIYer
November 4, 2014
Answer: 
I have used a similar Diablo blade for cutting aluminum trim. It cut it very cleanly but I don't think this is meant to cut anything but wood.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
 
4 answers

3/4 Melamine

This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
Asked by
Read all my Q&A
August 19, 2016
would this blade be ok for 3/4 melamine. if not do any of you have suggestions?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

August 30, 2016
Answer: 
Hi, Doug - Yes, this blade will work well when cutting melamine.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Hampshire
Read all my Q&A
Home Improvement Profile: Professional
August 28, 2016
Answer: 
Melamine Resin is prone to chipping when cut with saw blades. The finer the tooth the better.
Thanks for reminding me, my mom had some dishes and bowls made of that in the late 50's early 60's. if it was like what I remember. maybe a bandsaw or hacksaw
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Bothell
Read all my Q&A
August 24, 2016
Answer: 
Probably not. I use this blade for pressure treated wood, cedar lumber, PVC tubing, and polycarbonate panels. It does an excellent job for those. Melamine panels are typically a hard plastic coating on a particle board substrate. The plastic surface tends to chip badly and randomly when hit with the wrong
blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Branchland, West Virginia 25506
Read all my Q&A
Home Improvement Profile: DIYer
August 22, 2016
Answer: 
If the Melamine is a countertop I definitely wouldn't use this blade. I use this blade for framing lumber and ripping.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
 
4 answers

Would this blade work well for cutting butcher block counter top?

This question is from 7-1/4 in. x 60-Tooth Fine Finish Saw Blade
Asked by
Nashville, TN
Read all my Q&A
July 7, 2015
The counter top is 1 - 1/2" thick and is made of oak.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Oswego, ILL
Read all my Q&A
Home Improvement Profile: DIYer
June 7, 2016
Answer: 
YES IT WILL.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Branchland, West Virginia 25506
Read all my Q&A
Home Improvement Profile: DIYer
August 23, 2015
Answer: 
I bought two of these 10" blades and ripped some rough oak lumber and it just eat it up. Yes I believe it would but you can't crowd or push it too hard.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
North Texas
Read all my Q&A
Home Improvement Profile: DIYer
July 16, 2015
Answer: 
The blade can handle that just fine as long as there is a method of making a straight cut. You need to be sure that the saw blade is properly guided through the wood, such as on a good table saw or, if using a rotary hand saw, to use a rigid guide (secured with good clamps) and be sure the guide edge of the sole plate of the saw is parallel to the blade and that you firmly hold the sole plate next to the Read More
The blade can handle that just fine as long as there is a method of making a straight cut. You need to be sure that the saw blade is properly guided through the wood, such as on a good table saw or, if using a rotary hand saw, to use a rigid guide (secured with good clamps) and be sure the guide edge of the sole plate of the saw is parallel to the blade and that you firmly hold the sole plate next to the guide so that you don't inadvertently allow the blade to wander while making the cut.
Also, the cut made by the blade is less than 1/8" wide and so you may have to compensate slightly if you need to precisely locate the cut on the work piece. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

July 14, 2015
Answer: 
This blade provided the best quality of cut for a solid wooden butcher block with a 7 ¼” portable circular saw. If the butcher block has veneer on the top or bottom, they may want to consider taping the cut line.
Also, we recommend adjusting the depth of the cut so that one full carbide tooth is exposed on the bottom of the cut to allow for better chip evacuation.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
2 »
  • 2016-09-08 T12:14:06.149-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100627136, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 88 reviewers.
Rated 4.0 out of 5.0 by Good enough for anything up to fine cabinetry This blade in a good quality circular saw will do just about anything you want in any project up to creating fine cabinetry. There is still a tiny bit of tear out on the side you are cutting on so remember to cut with the "bad" side up. This is at least in part endemic to these saws, regardless of blade, so remember to cut with the good side down. The high tooth count gives a smooth cut in dimension lumber. For cutting lumber in exotic species where costs are in the $4 to $8 a board foot I would invest in the best possible blade. Of course it is unlikely you would be cutting that lumber with a circular saw anyway. I would buy another if I needed it. August 30, 2016
Rated 5.0 out of 5.0 by Cuts through laminate like butter. We were installing laminate flooring and needed something that could cut it. It recommended carbide tipped blades on the saw. We tried regular saw blades and all they did was smoke and burn their way through, but this blade did the job and did it right. I highly recommend diablo blades! September 6, 2016
Rated 5.0 out of 5.0 by Good blade for cutting plywood I bought this blade for cutting some cabinet grade plywood it makes smooth cut very little chipping September 6, 2016
Rated 5.0 out of 5.0 by There is no other choice I purchased this blade to make some very clean cuts on some beautiful maple plywood. I noticed the 40T blade did give some small tear-out so I swapped out to this. A VERY smooth, clean cut from beginning to end. Freud blades are really a step above the rest and this is no exception. September 6, 2016
Rated 5.0 out of 5.0 by Diablo 60 tooth carbide blade I needed a way to efficiently cut corrugated sheet metal. I tried everything without success. Then I found a video on the internet that used a Skilsaw and Diablo blade. Works great but be very careful and wear ear and FULL eye protection. July 26, 2016
Rated 4.0 out of 5.0 by SAW BLADE THE SAW BLADE WAS EXCELLENT FOR TRIMMING THE WOODWORK AROUND MY HOUSE. August 2, 2016
Rated 5.0 out of 5.0 by my go to blade I have been useing these Diablo blades for years. They cut great and stay sharp. These 60 tooth blades make a very smooth cut even on plywood. July 26, 2016
Rated 5.0 out of 5.0 by Perfect Blade For The Job! Had two 3/4", 2x4' popular panels I needed to cut down for an expanded storage area. I didn't have any fine tooth blades for my circular saw. I'm a huge fan of Freud, and have used Diablo blades before. I love their quality of cuts, and this blade is no exception. My cuts were quick, smooth, and clean with no tear outs even when crosscutting this plywood, which was my concern. Diablo blades, and especially this one is an extremely nice blade, well worth the money. High quality product and Highly Recommended. May 25, 2016
  • 2016-09-08 T12:43:33.618-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_88, tr_88
  • loc_en_US, sid_100627136, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 69ms
  • REVIEWS, PRODUCT