Dimplex 60 in. 2,500-Watt Linear Proportional Convector Baseboard Heater-PC6025W31 - The Home Depot


Model # PC6025W31

Internet # 203568782

60 in. 2,500-Watt Linear Proportional Convector Baseboard Heater

Dimplex 60 in. 2,500-Watt Linear Proportional Convector Baseboard Heater

This item has been discontinued.
The Home Depot no longer carries this specific product.

$149.00 / each


Model # PC6025W31

Internet # 203568782

The Dimplex 60 in. 2500-Watt Linear Proportional Baseboard Heater has a innovative sleek and compact design. This revolutionary heater has a built-in electronic thermostat with heat proportioning for improved efficiency and reduced energy consumption. Dimplex baseboard heaters are the ideal heating solution for any area of your home.

  • New electronic proportioning thermostat, with CSA-C828 compliant control (+/-0.5oC/1oF), RF transceiver for on-board temperature control and heater-to-heater telegraphing
  • Faster heating of the room than a conventional baseboard due to rapid vertical laminar air flow, directing heat to the ceiling, speeding dispersal of warm air into the center of the room
  • Improved performance and reduced length through use of top heat discharge and new fin design
  • Superior shark-fin blade design on a steel tubular element for improved heat transfer and longer life
  • Discreet styling, reduced length and added versatility of placement provide more options when designing a room
  • Full length automatic overheat reset for safety
  • Optional wall mounted remote control for multi-heater temperature regulation
  • Finish - specially-formulated epoxy/polyester powder coating is environmentally friendly and resists fading and abrasion
  • Heating element - a nickel chromium element is totally enclosed within a steel sheath, providing superior life expectancy and resistance to rust, shark-fin shaped aluminum fins are firmly staked in an upright position to provide directional wicking for top discharge heat transfer
  • Controls and wiring - supplied with an installed electronic proportioning thermostat for CSA- C828 compliant control; an RF transceiver for remote heat control and whole-home temperature syncing, wall mounted remote control for user convenience (optional accessory)
  • Installation - easily removed front caps; knock-outs on both sides of the convector; and pre-stamped mounting holes make installation easy
  • Applications - all residential applications, commercial offices, lobbies, washroom
  • Home Depot Protection Plan:

    Home Depot Protection Plan

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  2.38 in  Assembled Height (in.)  6.63 in 
Assembled Width (in.)  60 in  Product Depth (in.)  2.38 
Product Height (in.)  6.63  Product Width (in.)  60 
Baseboard Heating Type  Electric  Color  White 
Color Family  Whites  Heat rating (BTU/hour)  8530 
Heating Product Type  Baseboard  Hydronic  No 
Product Weight (lb.)  9.95 lb  Returnable  90-Day 
Thermostat  Yes  Vented  Yes 
Voltage (volts)  240  Wattage (watts)  2500 
Warranty / Certifications
Certifications and Listings  CSA Listed  ENERGY STAR Certified  No 
Manufacturer Warranty  1 Year - Limited on components / 10 Years - Limited on elements 


Rated 4.4 out of 5 by 8 reviewers.
Rated 5.0 out of 5.0 by dimplex heater review these heaters are awesome i have bought 5 of them for my cottage with the wireless thermostat and have never had a problem, easy to wire NO NOISE whatsoever i don`t know why people are complaining about noise ,they heat up very fast and are half the size of normal baseboards thank you dimplex for a great product June 18, 2014
Rated 5.0 out of 5.0 by Good Quality Product is compact and very quiet. It is very easy to install and use. November 17, 2013
Rated 4.0 out of 5.0 by Great, Quiet, Heat This is the only baseboard heater in my house so I can't give a good comparison to others, but it does exactly what it's supposed to do. Even in Buffalo's single degree temperatures, it is able to keep my bedroom at a comfortable 70 degrees (probably higher if I tried). The wiring diagram was confusing at first, but was reasonably simple to figure out -- always hire a professional electrician!! I spaced it out from the wall using a 1x6 board, but the wall above it still gets very hot. I will likely be adding some more heaters in select rooms, and will probably be shopping for Dimplex products first! January 21, 2014
Rated 4.0 out of 5.0 by Worth it! The heaters work awesome! They heat up quickly and make no noise. Instructions are easy to follow and straight forward. You should know that if you have the built in thermostat be prepared to have them set 4 degrees cooler than than the desired temp. At 60 degrees F the room was about 64 degrees. 61 was at about 66 Degrees Etc. The baseboards live up to being 50% smaller and being able to heat the room. I replace 112" Electric Baseboard with this model and the room is kept very warm without the heater constantly running. They make no noise at all which I did see in a couple of the reviews which made me reluctant to buy, but I am glad I did. My only theory would be the front plate might not have been attached securely or the element. I bought two and they both heat my basement as advertised! Now I have to fix the trim around the floors But that is no big deal! My only other issue was the channel underneath the baseboard which they recommend you use the left side as a junction box if the wire comes in on that side. It should be enclosed underneath the heater instead of having just the lip or an extended lip, in my opinion, as the wire just hangs and more plastic wire protectors/clips should be included in the box for these kind of runs. The wire clamps I bought at store and are code. I had to bend the wire up at almost a right angle. They should leave a space on either side of that channel for room for wire clamps like they have now. But that was my only real issue with them. But not a deal breaker at all and I would highly recommend these heaters! January 11, 2015
Rated 4.0 out of 5.0 by Dimplex Linear Proportional Convector Baseboard Heater and the "stand-off" Optimizer Kit Generally easy to install, however adding the Optimizer Kit is a bit fussy. Each leg in the kit has two sets of very little tiny tabs one must press into the back of the heater, and then move on to the next one. The tabs are so small, the leg you just put on pops off when you're doing the next one and it becomes a case of corralling cats. Each leg has two screws and I found if you start a screw into the tabs they won't pop off so easily. Overall this is a good unit, but the stand-offs, though very useful, make installation a delicate fuss. September 11, 2014
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.