Model # 9901

Internet #202263215

Store SKU #802418

Dremel 1/8 in. Rectangle Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics, and Hard Wood
0080596099015

Dremel

1/8 in. Rectangle Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics, and Hard Wood

  • For use with Dremel rotary tools (sold seperately)
  • Ideal for sharpening, deburring and grinding on hard materials
  • Designed for working with conic and flat surfaces
$9.56 /each

Frequently Bought Together

Product Overview

The Dremel 9901 is a tungsten carbide cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooth’s or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Can I use this bit for carving sandstone and harder stones?

Asked by: Terry
Sandstone is much softer than most stones so you could carve that type. It would depend on the stone your are trying to carve, it may be too hard and you'll just be able to etch on the stone.
Answered by: TeamDremel
Date published: 2016-08-18

Can tungsten carbide blade cut through tile grout?

We need to replace a couple of porcelain floor tiles and need a blade that will cut through the grout. Will this tungsten carbide blade be able to do this.
Asked by: Chowhound
The 9901 tungsten carbide bit is not designed for grout removal.
Answered by: TeamDremel
Date published: 2015-11-29
  • y_2017, m_2, d_19, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202263215, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 47ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/8 in. Rectangle Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics, and Hard Wood is rated 4.2 out of 5 by 16.
Rated 2 out of 5 by from Not made for cutting 16gauge sheet metal & up. worked... Not made for cutting 16gauge sheet metal & up. worked for 22gauge ok. It just makes a lot of noise as it eats through the sheet.
Date published: 2017-02-08
Rated 5 out of 5 by from Love my Dremel This carbide cuttter was just what I needed to widen the opening for the bolts in my metal bed frame. A very powerful tool.
Date published: 2017-01-10
Rated 5 out of 5 by from Must have for grinding a metal product. I use it on doors when the latch is sticking. Must have for grinding a metal product. I use it on doors when the latch is sticking.
Date published: 2016-11-08
Rated 5 out of 5 by from Worked very well. Very satisfied Used it to cut a circle in mason jar cover. Did a fine job with smooth edgw
Date published: 2016-08-23
Rated 3 out of 5 by from Not the best It worked but took a long time to cut Not all that great for the price
Date published: 2016-12-28
Rated 4 out of 5 by from Nice It cut the metal just as it should . Not much more can be said.
Date published: 2016-11-01
Rated 5 out of 5 by from Great grinder ripping I use this bit for grinding and hogging out brass and steel and there is not another bit that I have tryed that works so good. It is a must have bit for anyone serious.
Date published: 2015-09-26
Rated 5 out of 5 by from Great product Stays sharp and cuts through practically anything. I use it mainly on 1/4" thick (or thinner) mild steel and various other metals, and it works great. I've used it both in my rotary tool and in my drill press. Either works, but you still have to be careful not to twist too much or else it will break (it is carbide, after all).
Date published: 2012-05-23
  • y_2017, m_2, d_20, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_, sid_202263215, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT