Rated 4.4 out of 5 by 11
Rated 5.0 out of 5.0 by Rog Worked very well. Very satisfied
Used it to cut a circle in mason jar cover. Did a fine job with smooth edgw
August 23, 2016
Rated 5.0 out of 5.0 by grommet Cuts and stays sharp for a long time
I've had this bit for years now and have used it on steel, brass and acrylic. The latter is notorious for dulling bits but this bit has kept working and working. Keep thinking I'll need to finally replace it but it's still good. It is expensive but considering how long it lasts I think in the end it's a bargain.
September 12, 2015
Rated 5.0 out of 5.0 by westsider Awesome little bit
I was making some mounting brackets out of 1/4 steel, and my bolt holes were a little out of alignment. I didn't want to drill up as they weren't that far off, so I decided to try this little beauty. I was able to stretch the holes for a perfect fit. I was amazed how well this thing cut through 1/4 steel, like a hot knife through butter. The only down side is that it generated hundreds if not thousands of little metal slivers or splinters from cutting. I ended up pulling about a half dozen out of my hands because I was to hard headed to get some gloves. So if your cutting fairly thick metal, you may want to make sure you wear gloves and a long sleeve shirt to protect yourself from the material. As always, wear eye protection.
December 2, 2014
Rated 5.0 out of 5.0 by Stef Great grinder ripping
I use this bit for grinding and hogging out brass and steel and there is not another bit that I have tryed that works so good.
It is a must have bit for anyone serious.
September 25, 2015
Rated 5.0 out of 5.0 by Rick CR 89
The drill was expensive but did the job easily. Would buy agaibn.
March 12, 2015
Rated 1.0 out of 5.0 by Funkymunky4685 Doesn't cut tile
Bought this bit so that I could notch out a small "U" shape on some grade 5 floor tile. It wouldn't cut at all. It kind of just gnawed at the tile and probably would have taken me days to actually notch out what I needed to notch out. It will probably cut something weaker, but definitely does not work on tile.
December 10, 2014
Rated 5.0 out of 5.0 by wiplyr Another great Dremmel tool
Great for fine use when working with ceramic tile. Would not try to do such intricate work without this.
October 28, 2014
Rated 5.0 out of 5.0 by darkwolf Tungsten Carbide Cutter
The bit was very useful while I did not need to rent a tile cutter. It held up and glided through the ceramic tiles and grout. It is an excellent tool to have in your toolbox.
April 15, 2014