Model # EZ456

Internet #100484365

Store SKU #634667

Dremel EZ Lock 1-1/2 in. Metal Cut-Off Rotary Wheels for Metal (5-Pack)
0080596025816

Dremel

EZ Lock 1-1/2 in. Metal Cut-Off Rotary Wheels for Metal (5-Pack)

  • For use with Dremel rotary tools (sold seperately)
  • Perfect for cutting metal in hard to reach places
  • Requires EZ402 EZ lock mandrel (sold seperately)
$12.20 /each

Frequently Bought Together

Product Overview

Easily cut through metal with these Dremel EZ Lock 1-1/2 in. Metal Cut-Off Wheels (5-Pack). Changing cutting wheels is simple thanks to the EZ Lock design. Dremel Attachments and Accys are designed to be just what you need to complete projects.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Life of saw blade when cutting off carpet nails to floor level?

Asked by: Anonymous
The saw blade itself would probably work fine, but the metal ring at the center is _much_ too insecurely attached. It will tear out long before the disc wears out.
Answered by: FRC5708
Date published: 2017-02-22

Will this cut through concrete and masonry nails? and if so, what speed/model of Dremel will work best?

Builder left a few nails sticking out of the brick on our house (an inch or so). They are close to an inside corner/tight area. Have tried small hacksaw and a 9,000 rpm multi-tool with Bosch metal cutting blade. Barely scraped the nails. I have a Dremel MultiPro Model 395 but have not tried it yet.
Asked by: TRJ1029
Absolutely! I've cut off nails, screws, bolts up to 1/2", rebar, and lots of other similar materials. For hard metals, higher rpms are better. My Dremel is quite old (don't know the model number) and just a standard Dremel, but it works quite well at 3/4 to full speed on hard and hardened metals.
Answered by: BigG
Date published: 2017-04-19

about the ez lock

how do you connect the ez lock wheel to the mandrel?
Asked by: chip
You need the ez lock mandrel. These won't work on the screw in mandrel. There are "starter" packs that have the right mandrel. Search Home Depot for "Dremel ez lock". The first item that came up for me, just now, was the starter pack kit for these cut-off wheels!
Answered by: BigG
Date published: 2017-04-19

Does this come with everything I'll need to get started cutting?

The Dremel I have is missing some connection components.
Asked by: evan
You will need the ez lock mandrel. Otherwise, no special items needed, other than safety glasses. These throw hot metal sparks just like the big cutting disks.
Answered by: BigG
Date published: 2017-04-19
  • y_2017, m_4, d_30, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_100484365, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 84ms
  • QUESTIONS, PRODUCT

Customer Reviews

EZ Lock 1-1/2 in. Metal Cut-Off Rotary Wheels for Metal (5-Pack) is rated 3.7 out of 5 by 61.
Rated 1 out of 5 by from This is a total piece of garbage. There is a metal piece embedded in the center that is supposed... This is a total piece of garbage. There is a metal piece embedded in the center that is supposed to allow you to attach it to a lock mandrel. This metal piece breaks away from the wheel after about 30 seconds. I went through all 5 in about 10 minutes total. The only reason they lasted that long is because changing wheels is a huge pain - especially after they break. They should just make a cutting wheel that is metal and has a hard attachment to the shaft. They have created a weak point at the place where the tool needs to be the strongest. Do not buy this piece of garbage. It was more effective to use a rusty hand saw.
Date published: 2017-03-14
Rated 2 out of 5 by from Very easy to assemble, but central assembly is _way_ too fragile for a cut-off wheel -- if you're... Very easy to assemble, but central assembly is _way_ too fragile for a cut-off wheel -- if you're trying to cut through anything more than soft aluminum, the metal ring in the middle of the wheel tears out much too easily. We've tried using them to cut off normal-sized rivets and screws, and we ended up wasting one or two wheels for _each_ one.
Date published: 2017-02-22
Rated 1 out of 5 by from I would not recommend this product at this time. The metal collar breaks away from the cutting wh... I would not recommend this product at this time. The metal collar breaks away from the cutting wheel. Out of five in my package three have broken this way with less than 5% use. I am using the wheel at 25K rpms (within parameters) on 1/8" aluminum. I did not have this problem until I started using the five packs. Lots of lost time on my project. Grrr.
Date published: 2017-01-03
Rated 4 out of 5 by from Just got the a new Dremel tool and got the... Just got the a new Dremel tool and got the Metel EZ lock kit to go with it. EZ lock is great and fast. Really enjoyed it. Only reason I didn't give it an excellent is the wheels are a bit on the expensive side and wear quickly. But I had a small space to work in and this got the job done.
Date published: 2017-03-08
Rated 1 out of 5 by from EZ Lock is a great idea, however... These EZ Lock wheels are a great idea, however, I went through a total of four EZ Lock wheels vs one '426' cutting wheels. The EZ Lock center would separate from the fiberglass cutting piece in under a minute of use, making the wheel completely useless within that time.
Date published: 2016-12-31
Rated 5 out of 5 by from Dremel was easy to set up and easy to use.There... Dremel was easy to set up and easy to use.There are are many options and accessories to make any small or big job easily accomplished. Great product.
Date published: 2017-03-01
Rated 5 out of 5 by from Great product, able to cut thru thin metal very easily. I use it to cut of bolt heads and gutter... Great product, able to cut thru thin metal very easily. I use it to cut of bolt heads and gutter material
Date published: 2016-11-29
Rated 5 out of 5 by from Works great. Since I use often, the EZ Lock works extremely well for unloading and loading a disc. Works great. Since I use often, the EZ Lock works extremely well for unloading and loading a disc.
Date published: 2016-11-09
  • y_2017, m_4, d_24, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_61
  • loc_, sid_100484365, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 91ms
  • REVIEWS, PRODUCT