Model # EZ544

Internet #202263201

Store SKU #777529

Dremel EZ Lock 1-1/2 in. Wood Cutting Rotary Wheel
0080596027483

Dremel

EZ Lock 1-1/2 in. Wood Cutting Rotary Wheel

  • For use with Dremel rotary tools (sold seperately)
  • Cuts 1/2 in. wood and laminate fast with little effort
  • Requires EZ402 EZ lock mandrel (sold seperately)
$15.97 /each

Frequently Bought Together

Product Overview

The Dremel EZ Lock 1-1/2 in. Carbide Wood-Cutting Wheel is designed to cut up to 1/2 in. wood and laminate easily. The cutting wheel features carbide construction for durability and a screw-free design for easy locking and loading.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Is this wheel wide enough to cut through baseboards (vertically) that are on a wall?

Holding the blade so it is straight up and down (Dremel tool parallel with the floor) can it cut out a piece of baseboard that is 3/8" thick?
Asked by: Bubba
Yes, this wheel cuts up to 1/2" of wood.
Answered by: TeamDremel
Date published: 2016-05-19

Will the Dremel 9000 cut 3/8" engineered flooring with clean cuts using theEZ lock rotary wheel? ...

Will the Dremel 9000 cut 3/8" engineered flooring with clean cuts using theEZ lock rotary wheel? If not what will?
Asked by: Dave
The EZlock rotary wheel is designed for cutting up to 1/2" thick laminate easily. The cut is free hand and we cannot guarantee what the result of cut will be..
Answered by: TeamDremel
Date published: 2017-03-26

What is the kerf, or thickness of the cut, with this wheel?

I need to cut 2-3' sections of 1/4" spanish cedar into 1/4" wide strips. Material conservation is important, and i only have a few portable power tools to work with.
Asked by: KickStart
Please contact our Dremel Customer Service at 1-800-437-3635, Monday through Friday, 8am - 6pm CST for more detailed information.
Answered by: TeamDremel
Date published: 2017-01-25
  • y_2017, m_4, d_21, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_202263201, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms
  • QUESTIONS, PRODUCT

Customer Reviews

EZ Lock 1-1/2 in. Wood Cutting Rotary Wheel is rated 4.0 out of 5 by 11.
Rated 4 out of 5 by from This was ok for small cuts and great for around... This was ok for small cuts and great for around edges but a deep cut required cutting from both sides
Date published: 2017-01-24
Rated 5 out of 5 by from Easy to use Cut through some old reclaimed fence wood very easily very surprised
Date published: 2017-04-18
Rated 5 out of 5 by from Mighty Blade Used this blade on laminate floors. I needed something that would make small cuts, vents etc. It did the job well.
Date published: 2016-09-06
Rated 1 out of 5 by from Wish I had money back... Dremel tools are hit and miss for most projects. I used this for to cut a foot of 1/2' thick plywood close to the wall as the package said this device could cut. However, it barely made a dent in soft pine and overheated my Dremel and put it out of commission for about an hour. I think the tool is ok after it cooled down, however, this "cutter" sparked and skipped and did very little more than a hand saw can do.
Date published: 2012-08-24
Rated 4 out of 5 by from Good solution for delicate work This cutting wheel is a little pricey. I bought two so I would not be caught if one grew dull or otherwise failed before the work was done. The cutting wheel is excellent for a delicate cut of hard wood in tight quarters. This work was slow because I was being extra careful in removing the panel in a rail & stile cabinet door. The EZ Lock feature is very convenient. This is not intended as a production tool. Does a good job for controled/narrow application.
Date published: 2013-09-05
Rated 5 out of 5 by from great cutter! I used this to cut 1/4 dowels, it worked great! Also used it to cut some 1/4" x 1/4" sick, worked well on those to! All around great!
Date published: 2015-06-30
Rated 5 out of 5 by from best dremal attachment This is my go to attachment. If im doing metal or pvc. This does not slow down. The only thing that is a draw back is its easy to bend it. I have replaced mine several times. All in all would by more. Very good attachment for your dremal
Date published: 2015-03-10
Rated 4 out of 5 by from Dremel I bought this for a specific cut on a project. It was did exactly what I wanted it so do and because of its size was the perfect size. I didn't give a 5 star rating, because there is always room for improvement.
Date published: 2014-11-11
  • y_2017, m_4, d_22, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_, sid_202263201, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 22ms
  • REVIEWS, PRODUCT