Model # MM501

Internet #100659461

Store SKU #811453

Dremel Multi-Max 1/16 in. Grout Removal Oscillating Tool Blade
0080596028688

Dremel

Multi-Max 1/16 in. Grout Removal Oscillating Tool Blade

  • For use with Dremel Multi-Max tools (sold seperately)
  • Removes grout up to wall, floor or corner surface
  • Also fits Bosch Multi-X+N225 PS50 and Fein Multi-Master 636
$21.97 /each

Frequently Bought Together

Product Overview

Remove grout joints between wall tiles for repair, remodeling or restoration work with the Dremel 1/16 in. Grout Removal Blade. It was designed specifically to remove all grout up to the surface of a wall or corner to give you more efficient work. This blade was made of carbide and sized for the width of the grout line.

  • Planer blade
  • Made of carbide
  • For removing grout joints between wall tiles
  • Designed so the blade can remove all grout up to the surface of a wall or corner

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

7 Questions17 Answers

Customer Questions & Answers

Multi-Max 1/16 in. Grout Removal Blade
Multi-Max 1/16 in. Grout Removal Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
7 answers

can this blade cut tile or just grout

This question is from Multi-Max 1/16 in. Grout Removal Blade
Asked by
scott
livermore ca
April 26, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Kissimmee, FL, USA
Read all my Q&A
July 25, 2015
Answer: 
yes is a good tool makes cuts with a minimum grout powder
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Agua Dulce, CA
Read all my Q&A
Home Improvement Profile: DIYer
May 18, 2015
Answer: 
I was able to cut cement backer board with it easily enough however it might struggle with tile as I have found that carbide bits will wear quickly depending on the type of tile. You could try it, but I recommend keeping the tile and the blade wet with a spray bottle to keep it cool and extend the life of the carbide. Since its an electrical tool, you also need to be careful to keep the tool motor away Read More
I was able to cut cement backer board with it easily enough however it might struggle with tile as I have found that carbide bits will wear quickly depending on the type of tile. You could try it, but I recommend keeping the tile and the blade wet with a spray bottle to keep it cool and extend the life of the carbide. Since its an electrical tool, you also need to be careful to keep the tool motor away from the spray. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California, USA
Read all my Q&A
April 17, 2014
Answer: 
I've only tried it on grout. There are no reviews posted for tile.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Colorado, USA
Read all my Q&A
March 25, 2014
Answer: 
This blade can only cut the grout the tile is extremely hard to cut and you would not be able to cut it with this.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Spanaway, wa
Read all my Q&A
June 9, 2013
Answer: 
This is only for removing grout.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
April 27, 2013
Answer: 
Grout only.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Jay_HD_CHI
April 26, 2013
Answer: 
Hi there scott,
This particular blade is designed to remove the grout from existing tile jobs. If you are looking to cut actual tile, then I suggest using a Wet-Saw if the tile is not already installed, or the EZ Lock Diamond Cutting Wheel seen below
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
 
3 answers

which dremel tool does this attachment fit?

This question is from Multi-Max 1/16 in. Grout Removal Blade
Asked by
Kathy
October 18, 2012
We have an old (10 yrs) dremel tool.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
California, USA
Read all my Q&A
April 17, 2014
Answer: 
I have a new Demel Multi-Max MM20.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Spanaway, WA, USA
Read all my Q&A
June 9, 2013
Answer: 
This fits only the Dremel Muli-Max.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 18, 2012
Answer: 
Hi Kathy,
This blade is for the Dremel Multi-Max 2.3-Amp Oscillating Tool. It and the other blades shown
fit this tool only. They will not fit your earlier model Dremel tool.
Mike, The Home Depot Answer Man
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Will this tool damage the stone tile edge when removing 1/16" grout joint for 3/8" marble tile floor?

This question is from Multi-Max 1/16 in. Grout Removal Blade
Asked by
Houston
Read all my Q&A
May 13, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
May 16, 2016
Answer: 
It should not.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Colorado
Read all my Q&A
May 15, 2016
Answer: 
It shouldn't damage the tile edge if used properly. The blade just wears the grout away. Of course, the grout joint has to be a straight line.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Does this attachment work with the Dremel Multi Max 30?

This question is from Multi-Max 1/16 in. Grout Removal Blade
Asked by
West Linn OR
Read all my Q&A
October 23, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Phelps N.Y.
Read all my Q&A
Home Improvement Profile: DIYer
June 12, 2016
Answer: 
Yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 25, 2014
Answer: 
Yes, the MM501 Grout Blade can be used with the MM30 Multi Max.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:34:24.063-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100659461, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • QUESTIONS, PRODUCT

Customer Reviews

Multi-Max 1/16 in. Grout Removal Oscillating Tool Blade is rated 4.5 out of 5 by 34.
Rated 5 out of 5 by from This blade will work with both the Milwaulkee M12 multi-tool head & the supplied adapter that com... This blade will work with both the Milwaulkee M12 multi-tool head & the supplied adapter that comes with the multi tool....but I found putting the blade directly on the tools head is a tighter fit. also....using the head you can put the blade on at 5 different angles to the tool, left, 45 to the left, straight up, 45 to the right & right, (with the supplied adapter it can only be used left, straight and to the right.) This I found nice as I was able to use more of the blades surface without the tool being at a weird angle while working.
Date published: 2016-12-02
Rated 5 out of 5 by from Great tool blade Reasonable price and works very well bought with other brands
Date published: 2016-12-29
Rated 5 out of 5 by from Worked for me worked well removing some tile in my master bathroom.
Date published: 2016-10-19
Rated 4 out of 5 by from Great While Sharp! Blade works well when sharp but dulls quickly. Went through 3 of these removing grout from average-size shower. HD price point is double the online price at Amazon, but when you need it now...you need it now! Make sure to wear a mask & eye protection as dust will be HEAVY and small pieces of grout will be flying around! While pricy to get the job done (especially at HD), this will cut labor time way more than half and should allow you to get most all of the old grout removed as opposed to begging to get to the 2/3rd's point when using a manual grout saw!
Date published: 2016-05-11
Rated 5 out of 5 by from Just what you need on the small tiles in a bathroom. don't try to do this by hand it's hard enough with the power oscillator the tool work as described and made the job extremely easy to get completed
Date published: 2014-03-25
Rated 5 out of 5 by from blade approval the dremel grout removal blade worked better than I had hoped. Although a little time cosuming it totaly turns the grout into a fine powder.which you can vacumn away. It's a little pricey but seems to hold up and the blade doesn't wear down. overall a good product
Date published: 2014-07-08
Rated 5 out of 5 by from Makes the job so much easier. I started my de-grouting project by hand. However, my tiles were installed about a 20th of an inch apart, and even a utility knife had a hard time getting between them. This grout removal blade saved my hands. It did widen the gap between tiles, of course, but I'm ok with that. I honestly don't think I could have completed this job without it. We used two blades to do a full-sized shower, though I think the first one probably could have made it through to the end.
Date published: 2014-03-27
Rated 5 out of 5 by from Regrouting kitchen floor Cuts through grout good. I also cut excess thinset. Two blades did the job of 375 8" tiles. That's 1000" feet of 1/4" sanded grout I removed.
Date published: 2016-06-12
  • y_2017, m_1, d_15, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_33
  • loc_, sid_100659461, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT