Rated 4.6 out of 5 by 44
Rated 5.0 out of 5.0 by johnnyrocket Been meaning to do this for a long time
Since I've gotten a little older,My eyes aren't as good as they used to be,and I've always heard that the drill doctor worked really well,so I decided to research it and found out that most people that had them,liked them,It seemed a little spendy,but I took a chance,I'm sure glad I did.Its a great little machine,I got the larger size because I got some bigger bits from my dad when he passed,God rest his soul.I used to sharpen all my bits at work on the bench grinder but since I've Retired I do everything at home,You can sharpen your bits any where ,in the basement,or the garage,and its light,but built very sturdy,I did purchace to extra grinding wheel ,just in case I use this one up to fast,but I've sharpened an assortment of bits,maybe 30,from 1/8 " to 1/2 " ,and I might add some really chewed up ones,and within no time sharp as can be ,I've also sharpened some Masonary bits and it dose a great job.
March 2, 2016
Rated 5.0 out of 5.0 by vajoker One of the best tools I own
After you go through the video and I highly recommend it, this is one of the easiest and fastest machines to learn. This is a great product and is a must for anyone who goes through drill bits.
June 14, 2016
Rated 5.0 out of 5.0 by Irondovetail Drill DR 750X
After reading directions a couple times, and watching video, Was easy to understand how to set up and operate. Re-sharpened about 25 drills in less than an hour, and happy with results. ( All were sharpened to 118 degrees), Have tried split point and was easy to set up. Drills that would no longer cut thru mild steel (1020) are now cutting like a knife thru warm butter. Drill does need to be a couple inches long to fit in chuck and be able to align point for sharpening. 1/8" drill sharpened just as easy as 1/2" . Other than some major wear on old drills that required a lot of turns, would advise that if drill is in fairly good condition that you only go 6-8 turns max and then check to see if additional grinding is necessary. Found that several drills sharpened in less than 8 full turns. Would recommend this to anyone in a heart beat. Wish that had purchased it years ago. Forget the negative comments regarding the plastic housing. Today's plastics are tough and this unit looks up to the task.
May 10, 2016
Rated 5.0 out of 5.0 by JodyDoakes Nice product
Product does a good job of sharpening bits. It is a bit complicated to operate, but the geometry of bit points IS complicated. The video on the CD provided was a great help in figuring out how it operates. Once understood, it is pretty easy to use.
March 15, 2016
Rated 5.0 out of 5.0 by Phil Drill doc 750X
A must to have tool in every garage/ home shops and Jobsites ! The 750X exceeded my expectations in Reliabilty and simplicity ..
I highly recommend this tool.
March 15, 2016
Rated 4.0 out of 5.0 by seavertor Works
Not as easy as in the directions. 135 degree drill angle drills are difficult to grind. It requires playing around with the relief angle to keep from dulling the cutting edge but it does work. The same with split points on the 135 degree drill angle. It does work but not as easy as the directions make it sound.
February 17, 2016
Rated 5.0 out of 5.0 by DeeCee Very happy with the my choice to buy the drill doctor.
The Drill DR. is easy to use and very effective in sharpening drill bits.
February 12, 2016
Rated 5.0 out of 5.0 by JustMe Great choice so far!
I have only used it to sharpen a few bits, but just those were worth it. Time will tell how well it holds up, but no problems so far.
February 10, 2016