Model # EZFXZW

Internet #203161612

Dundas Jafine 4 in. Vent Cap Replacement Gasket Kit

Dundas Jafine

4 in. Vent Cap Replacement Gasket Kit

$13.18 /each

Frequently Bought Together

Product Overview

A quick and easy solution for those situations where a damaged vent cap requires replacement and removing the old cap is problematic or impossible. Kit includes ProVent 4 in. vent cap and universal fit gasket set. Gasket allows for new cap to be fitted and sealed over old vent cap frame.

  • Kit includes ProVent 4 in. vent cap and gasket
  • Gasket set allowing for new cap to be fitted and sealed over old vent cap frame
  • Ideal retro fit solution - installs in just a couple of minutes using only a screwdriver and 4 screws
  • Can be used with any Dundas Jafine cap design
  • Fits over all substrates including siding, stucco and brick
  • Creates waterproof seal




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

What gauge screw is recommended, i.e., #6, #8, etc.?

I know that the length will vary.
Asked by: marper
I removed an old screw and took it with me to compare it to screws to install this kit. In my case, I needed an extra half inch of length and I went up from the #6 that was in the old vent to a #7 to have a bit more bite.
Answered by: VickiK
Date published: 2016-10-04
  • y_2017, m_3, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_203161612, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms

Customer Reviews

4 in. Vent Cap Replacement Gasket Kit is rated 4.7 out of 5 by 9.
Rated 5 out of 5 by from Easy to install, perfect fit! I wanted to replace a broken, old Dundas Jafine outside dryer vent and didn't want to have to redrill or tear out the old one which had been painted over and chalked several times. What an easy, perfect fix this was! Simple to install with several installation options to make it almost foolproof! All I had to do was determine the slightly longer length of screw needed for the added depth. It looks fine as is, but I could paint it if I wanted to.
Date published: 2016-10-04
Rated 4 out of 5 by from Dryer Vent retrofit Used this to retrofit existing vent unit that had broken louvers. I was able to attach to existing unit with 3-in. #8 round head wood screws (not included), using only one of the smaller gaskets supplied. It looks OK, and is functional. I did not use the large thick gasket, since this would only get wet if it rained.
Date published: 2016-08-09
Rated 5 out of 5 by from well thought out product This is a well designed product for situations where pulling out the old vent duct may not be convenient. The duct in my house was installed when the house was built. Some years later the area in front of the duct was dry-walled, so access would be nearly impossible without ripping out the dry wall. This kit provides an easy alternative solution by simply installing a new cap over the old one. It took me less than 2 hrs to install this, including a trip to the hardware store for screws (not included). At first I wondered why the screws were not included, but I can imagine that every installation is different and requires different length screws. I need 3" long screws for my situation. Great product overall. It saved me the trouble of replacing dry wall, sanding, painting, etc.
Date published: 2014-06-01
Rated 4 out of 5 by from Better quality than the original. The three louvres work perfectly, moving outwards only as far as needed to allow the warm air from the dryer to dissipate. However, I didn't know until I was ready to install it over the old one that I needed to purchase four screws (that were not included). Also, there were no instructions how to insert the screws, etc. I found out by trial and error that I had to remove the four old screws first.
Date published: 2013-04-25
Rated 5 out of 5 by from Excellent product ! Although I am QUITE capable of removing the old vent, pulling out the tubing, re-attaching it to the new vent, re-mounting and caulking the whole thing, THIS is SO much simpler, easier and looks great ! I wish they had thrown in 4 long screws with it but small price to pay for such an excellent product !
Date published: 2016-09-11
Rated 4 out of 5 by from Good purchase Installed outside dryer vent cap, as old one was broken.
Date published: 2016-08-16
Rated 5 out of 5 by from Dryer Vent Good quality and price. Received the vent quickly. Easy to install.
Date published: 2014-05-30
Rated 5 out of 5 by from Great replacement for stucco mounted vent cap This product saved a lot of work replacing my vent cap that was overlaid with stucco. The cap simply mounts over the existing one and contains a gasket that accommodates a rough surface. Great design.
Date published: 2013-08-14
  • y_2017, m_3, d_26, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_203161612, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 25ms