Model # DFH-107-T

Internet #204308406

Duraflame 2500-Watt Ceiling Mount Heavy Duty Utility Heater
0611768077182

Discontinued Duraflame

2500-Watt Ceiling Mount Heavy Duty Utility Heater

  • Overheat protected to instantly shut off unit before overheating
  • 4 comfort settings: Low, Medium, Medium 2, High
  • Recommended for area up to 400 sq. ft.

Frequently Bought Together

Product Overview

This Duraflame ceiling-mount heavy duty utility heater is perfect for adding warmth to your garage or workshop. It has a built-in safety feature: an overheat protection device that instantly shuts off before the unit overheats. The unit can be mounted to the ceiling to not take up precious space in the garage/workshop. It has 4 comfort settings: low, medium, medium 2 and high.

  • Heater provides supplemental zone heating for up to 400 square feet
  • 4 comfort settings: Low, Medium, Medium 2, High
  • Adjustable louvers allow you to adjust the flow of the air
  • All metal heavy duty construction for use in garages and workshops
  • Can be mounted to ceiling with included hardware
  • Overheat protection device instantly shuts off before becoming overheated
  • The installation of this heater must comply with the applicable local and National electrical codes and utility requirements. Installation should be entrusted to only qualified, licensed personnel where required by law.
  • 1 year limited warranty
  • Durable steel construction
  • Hard wired

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions12 Answers

Customer Questions & Answers

2500-Watt Ceiling Mount Heavy Duty Utility Heater
2500-Watt Ceiling Mount Heavy Duty Utility Heater

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

Is this 115 or 220?? hard wired or plug in?

This question is from 2500-Watt Ceiling Mount Heavy Duty Utility Heater
Asked by
Hyannis, MA.
Read all my Q&A
December 28, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

December 29, 2015
Answer: 
It's 240V and requires direct, hard wiring. There's no power cord.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

December 28, 2015
Answer: 
Both the description and the spec here on the website say it is hardwired 240v. Hope that helps.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Read all my Q&A
December 28, 2015
Answer: 
It's 240 volts. Should be hard wired or have an electrician install the proper receptacle and plug on the unit.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Read all my Q&A
December 28, 2015
Answer: 
"This is a hard wired item, no cord is available.
Ceiling mountable
Fan forced 240-Volt heatThis is a hard wired item, no cord is available.
Ceiling mountable
Fan forced 240-Volt heat"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Can I wire from the dryer outlet?

This question is from 2500-Watt Ceiling Mount Heavy Duty Utility Heater
Asked by
Cedar Rapids, Iowa
Read all my Q&A
November 20, 2015
Can I wire this unit to the back of my dryer outlet, which using 240 volt and 30 Amp circuit already? Thanks,
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
January 1, 2016
Answer: 
I typed in to my dryer line and put a dryer plug on it and have my 220 welder pluged in to it, have no problems at all, just make sure you do not use the dryer when useing the garage heater, other wise you'll draw to many amps and kick the dryer circiut.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Colorado
Read all my Q&A
Home Improvement Profile: Professional
December 28, 2015
Answer: 
NO! Your dryer needs a stand alone circuit and this heater also needs a stand alone circuit. If you are asking if you can use both your dryer and this heater on the same circuit the answer is no. It is against code, would cause nuisance breaker trips at best and a fire at worst.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 28, 2015
Answer: 
Yes..Provided that your dryer line is a 240 line and you use the proper plug
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
2 answers

I lost my instruction manual

This question is from 2500-Watt Ceiling Mount Heavy Duty Utility Heater
Asked by
Read all my Q&A
December 4, 2015
Is there a thermostat on the machine?
It ran for three months straight and never shut off or overheated.
Is there a way to find a new instruction manual?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

December 29, 2015
Answer: 
Sorry, I meant right side.
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 28, 2015
Answer: 
According to the manual, there's a thermostat on the left side.
For a replacement manual, go to http://www.tsicustomerservice.com/manuals.aspx and enter the model #.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Can it be used in a basement

This question is from 2500-Watt Ceiling Mount Heavy Duty Utility Heater
Asked by
Atlanta, Ga
Read all my Q&A
December 28, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Colorado
Read all my Q&A
Home Improvement Profile: Professional
January 4, 2016
Answer: 
Since this is electric and not gas it doesn't matter where it is installed. It does not need vented. As long as it is installed according tot he manufacturer's guidance (i.e. properly wired, maintaining required clearances, etc.) you should be able to use it in your basement.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:48:09.273-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204308406, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 48ms
  • QUESTIONS, PRODUCT

Customer Reviews

2500-Watt Ceiling Mount Heavy Duty Utility Heater is rated 4.0 out of 5 by 11.
Rated 4 out of 5 by from This is a good unit. Just a little noisy warms the room fast. Has a good thermostat. It would hel... This is a good unit. Just a little noisy warms the room fast. Has a good thermostat. It would help to have a wire knock out, for the hook up.
Date published: 2016-11-08
Rated 5 out of 5 by from I purchased this heater for use in a garage workspace 18’x 20’. The main reason I picked this hea... I purchased this heater for use in a garage workspace 18’x 20’. The main reason I picked this heater is because it's rated at 2500 watts which is enough as the garage is insulated, most other heaters available are 4000 watts or more, which I did not want due to the higher electric cost. What I did not know until I received the heater (I believe it should be advertised as it will sell more of these) is that the watt rating is selectable. 4 Adjustable power settings: 5000w 17065BTU's, 4165W 14215BTU's, 3332W 11365BTU's, 2500W 8533BTU's This is done by moving jumper wires around when you make the electrical connection. The heater is designed to not bl;ow cold air so when it starts the element heats up, then the fan blows. This leads to a “crinkling” sound as the element is in aluminum fins which expand and contract. This is not a bad thing it is just different from the norm where heater fans blow immediately. It also keeps the fan running after it shuts off which cools the element and extracts the last bit of heat The only thing which could be better are the directions. The jumper positions for changing the wattage has diagrams and fairly simple. The 220v wiring of the unit to power is vague and there is no connection for a Neutral. It requires connecting the hot wires to L1 (Line 1) and L2 (line 2) and Ground wire to Ground screw. Your electrician that installs should know how and the correct gauge wire for the run. It heats well and works like its supposed to and a bargain.
Date published: 2016-12-09
Rated 3 out of 5 by from Advertized incorrectly Functional but with only one issue I found. Says it is for hardwiring but actual is not. No wiring 1/2" knock out. I had to punch my own as it comes with a 3/8 dia. hole for wiring that appears to be for a cord that was not included. Other that that it works fine to take the chill of my basement and the thermostat operates properly. Fairly reasonable constructed heater. Would by additional units if needed.
Date published: 2014-01-24
Rated 5 out of 5 by from Pleased as punch Actually a 5000W heater - hardwire settings for different wattages. Works great, gets hot. Straight forward install.
Date published: 2016-02-23
Rated 4 out of 5 by from Heater Doesn't heat garage as good as i thought it would, did install easy and hookup was easy directions not to clear
Date published: 2016-02-10
Rated 5 out of 5 by from Great Product I have a 20'x25' stand alone garage with 12' rafters and a concrete floor. When it's cold outside, it's almost as cold inside my garage. I purchased this Duraflame heater to knock off the chill in the morning. I got more than I expected. The heater kicks out some heat. It takes about 30 minutes to take the chill out of my garage. After that, it heats up fairly quickly. It heats everything in the room. I can turn the heater off and my garage stays warm for a few hours. Great heater.
Date published: 2014-03-25
Rated 1 out of 5 by from Full of Manufacturer Defects I have a two car attached garage and was looking for a heater that could bring the temperature up to 60+ so that I could comfortably work in the garage. When looking at the different heaters, I came across this one, which was $100+ less than the next comparable unit. At the time, it didn't have any reviews and the next model up had nearly 5/5 stars. Since it had comparable specs, I decided to go with this unit and save some money. However, when I received the first unit, it was defective out of the box. It was clearly a manufacturer defect - the housing was sloppily assembled in such a way the unit was bent and the black finish was peeling. I returned it for another one, which was no better - the thermostat was defective and it had the same bent/deformed housing. I returned it and ultimately ordered the more expensive unit. I haven't received it yet and I never got to try out the defective units. However, assuming it is in line with the other reviews, I think it will ultimately be a much better unit. At the end of the day, you really do get what you pay for. Long story short, I would not recommend this product.
Date published: 2014-01-24
Rated 4 out of 5 by from Good heater Only took about 20 minutes to install. Puts out a good amount of heat. Heated Garage from 25 to 65 degrees in about an hour and a half. Only thing that would improve this would be a thermostat with actual temperatures instead of circles going from small to big.
Date published: 2014-01-16
  • y_2017, m_1, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_, sid_204308406, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 49ms
  • REVIEWS, PRODUCT