Model # 10006

Internet #100111355

Store SKU #367269

E-Z Ancor Toggle-Lock 100 lb. 2-1/2 in. Philips Zinc-Plated Alloy Flat-Head Self-Drilling Drywall Anchors (2-Pack)

E-Z Ancor

Toggle-Lock 100 lb. 2-1/2 in. Philips Zinc-Plated Alloy Flat-Head Self-Drilling Drywall Anchors (2-Pack)

  • Easily installs in drywall, even if you hit a wood stud
  • Great for hanging blinds, picture frames or bathroom accessories
  • No pre-drilling necessary, installs with #2 Phillips screw driver
$274 /each

Frequently Bought Together

Product Overview

E-Z Ancor Toggle-Lock 100 lbs. 2-1/2 in. Zinc-Plated Alloy Flat-Head Philips Self-Drilling Drywall Anchors (2-Pack) feature deep threads and toggle clamps for installing pictures, shelves and mirrors in drywall. E-Z Toggle-Lock Anchors are versatile for multiple applications and hang up to 100 lbs. in wall (1/2 in. drywall) and 50 lbs. in ceiling. No pre-drilling is required.

  • Great for drywall fastening in walls and ceilings
  • Ideal for hanging shelving, mirrors, pictures and more
  • 100 lb. weight on package reflects maximum project load in 1/2 in. drywall
  • For safety in ceiling applications, a maximum weight of 50 lbs. is recommended
  • Easy installation no messy pre-drilling
  • Install with a #2 Philips screwdriver
  • Do not overtighten anchor
  • Toggle bar swivels to provide secure hold
  • Deep threads and toggle-clamp for strong holding power
  • Superior 1-piece construction prevents losing pieces behind wall
  • Do not use for mounting televisions

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

will these anchors work on stocco board

Asked by: dvs123
In my experience, no - the anchor bolts are so horrible quality, that even if you got the anchor to work in Stucco, the bold doesn't hold up and bite into the toggle lock.
Answered by: Edward
Date published: 2015-09-20

Can it be use for long term tower hanger on hollow door?

Example: I have looked at the manual and can't figure out what I did wrong.
Asked by: Derick
Yes, the Toggle-Lock 100 lb. 2-1/2 in. anchor can be used for a towel hanger into hollow door ONLY if the weight load put on the towel hanger is a max weight of 100 lbs.
Answered by: Paslode
Date published: 2017-01-04

Can i take out to screw and use it again?

If I remove the screw can I use the anchor with the same screw I just want to change the mounted item
Asked by: mike
Yes, the screw is reusable. Still ensure that the new mounted item is within the maximum weight load capacity.
Answered by: Paslode
Date published: 2016-11-22

What is max depth of wall that anchor will hold?

Asked by: MrFixit
Thank you for your question. The recommended wall thickness for Toggle-Lock 100 lb. Drywall Anchors is 1/2 in. We suggest that you contact our technical support department to discuss the details of your fastening application. You can reach them at 800-726-7386 from 8:30-5:00 pm CT Monday-Friday.
Answered by: Paslode
Date published: 2016-12-30
  • y_2017, m_6, d_21, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_100111355, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms

Customer Reviews

Toggle-Lock 100 lb. 2-1/2 in. Philips Zinc-Plated Alloy Flat-Head Self-Drilling Drywall Anchors (2-Pack) is rated 3.1 out of 5 by 10.
Rated 4 out of 5 by from Keep screwing! I'm using these to hang heavy drapes. Installation was quick and easy - press to wall, turn with screwdriver until the toggle slips through the wall, align bracket, insert long screw, and SCREW, SCREW, SCREW! I used an electric drill to screw the first 2/3 of the way SLOWLY, then finished off screwing by hand. It may seem as if the screw is freewheeling, but it is a LONG screw and will take some time for the anchor to catch and activate behind the wall. I am hanging four 10 foot black-out drapes (about 5 pounds each) using an 1" electrical conduit as the curtain rod. 4 stars for ease of use of the toggles - will update this review up or down in a few days if the drapes hold up without damaging the wall under the weight of the assembly.
Date published: 2017-06-18
Rated 1 out of 5 by from Mixed quality I had no problem using these toggle locks in two of the four locations I attempted. But on the third, the lock mechanism wouldn't work, so the screw kept spinning in place and I had to remove the toggle lock (which had not opened) and replace. The replacement worked. In the fourth location, however, the screw never really got a tight fit in the anchor, so the anchor is stuck in the wall and the screw slips around in it. I can't remove the anchor because the mechanism is sprung. You can see what I mean in the attached photo. Fifty-fifty is not the greatest of odds, so I'd use this product with caution.
Date published: 2013-12-04
Rated 5 out of 5 by from Great product Used about 10 of these to hang shelving units in my pantry room. I was hesitant to use after reading the reviews, but I didn't have an issue with a single anchor. I activated the anchor and insured that it worked properly prior to putting it into the wall. I found that the hole of the anchor wasn't tapped extremely well, but after running the screw through it a few times, it activated a lot smoother. Also, once activated behind the wall, it takes quite a bit of screwing to get that anchor all the way to the drywall (don't know if some thought the anchor was broken because of this). Would highly recommend.
Date published: 2015-03-09
Rated 1 out of 5 by from Anchor Bolts Strip, then Anchor can't be removed I read instructions - I'm just like that. I read the instructions on the package, and it cautioned against over tightening. Therefore, rather than use an electric driver (even with clutch all the way to the lowest setting), I decided to screw these in by hand. I installed the wall anchor part - so far, so good. I inserted the bolts to capture into the toggle, and screwed them down. The first one never seems to get "tight", and almost felt like they were free wheeling, then I finally got a slight amount of bite after around 25 - 30 turns of the screwdriver. I know these are long screws to adapt to varying length applications. I didn't "tighten", and moved to the 2nd screw. Same exact situation. I then went to "tighten" carefully by hand, and after a very light 1/4 turn of very, very minor resistance, boom - free wheeling again. They never caught again. I then removed them. Then the fun part - you can't easily remove the anchors from the wall without major surgery since the "toggle lock" is now at 90 degrees. Upon inspection, the anchor bolts were stripped around 2/3 of the way down, probably right where that very slight 1/4 turn of resistance was. Now I've got two anchors in the wall that are huge, ugly, and impossible to remove because of the 90 degree toggle. Well - you get it. Not good...
Date published: 2015-01-19
Rated 1 out of 5 by from Broke apart inside wall. After screwing into drywall I heard the sound of Metal hitting the floor. I unscrewed the anchor back out and saw that the part that flips up had broken off. In hindsight the flipping part of the anchor was loose before I started compared to the 2nd anchor, but I didn't bother using the 2nd one and just returned it.
Date published: 2015-01-12
Rated 1 out of 5 by from Only one of the two worked Only one is performing as desired. On the other, the screw will not secure to the anchor and pulls away no matter what I try. 50% success rate on a 2 pack is not ok.
Date published: 2016-08-20
Rated 5 out of 5 by from Excellent wall anchors. Purchased these to remount some bookshelves purchased from IKEA. The plastic anchor and screws that came with the bookshelf never seemed sturdy and eventually one shelf tumbled. These anchors were very easy to use and seem very secure so far. Our entertainment unit is now complete with our shelves mounted again.
Date published: 2013-10-07
Rated 4 out of 5 by from Supports a lot of weight and well designed They work as they should. However, I recommend pre-drilling to avoid chipping the Sheetrock/Drywall.
Date published: 2015-08-27
  • y_2017, m_6, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_100111355, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 114ms