0743184009024

ECHO

Model # 99944200907

Internet # 204159249

Store SKU # 205022

Speed-Feed 400 Universal Trimmer Head

$29.97 /each

Frequently Bought Together

Product Overview

The revolutionary ECHO Speed-Feed 400 takes the hassle out of refilling your trimmer head, and is one of the easiest tap-to-advance heads available. Reloads in under 30 seconds in just 3 easy steps, all without disassembling the head. Comes with a 90 day consumer, 30 day commercial warranty.

  • Easy tap-to-advance to reload
  • Holds up to 20 feet of 0.095 diameter line
  • Accepts 0.080 in. - 0.095 in. diameter line
  • Reloads in less than 30 seconds with 3 easy steps

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.) 
3.25 
Product Height (in.) 
10 
Product Width (in.) 
6.5 
Recommended line diameter (in.) 
.095 

Details

Fits brands 
ECHO 
Fits models 
All ECHO Trimmers 
Hand Orentation 
Universal/Reversible 
Returnable 
90-Day 
Trimmer Part Type 
Bump Feed Trimmer Head 
UV Protected 
Yes 
Weatherable 
Yes 

Warranty / Certifications

Manufacturer Warranty 
90 day consumer, 30 day commercial 

More Products With These Features

Search

Customer Questions & Answers

100 Questions160 Answers

Customer Questions & Answers

Speed-Feed 400 Universal Trimmer Head
Speed-Feed 400 Universal Trimmer Head

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

will it fit a GT curved shaft model ?

This question is from Speed-Feed 400 Universal Trimmer Head
Asked by
kansas city
Read all my Q&A
June 1, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Dale City, Virginia
Read all my Q&A
June 5, 2016
Answer: 
Yes it fits the GT 225. You use RH 1 which comes already installed in the white RH core. You switch out the black core with the white core. The instructions are complicated but the procedure is simple.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
April 10, 2016
Answer: 
Didn't fit my GT225 curved shaft trimmer. It said you need the RH6 (Black) adapter bolt and the kit did not have anything black in it except for a black plastic spacer/washer and a white plastic tool thing with a black screw attached to it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 2, 2015
Answer: 
This model is designed for all Echo trimmers.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
June 2, 2015
Answer: 
Yes, The Speed Feed 400 Universal Trimmer Head is compatible with all SRM and GT models.
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0
 
4 answers

Will the Echo Speed Feed 400 Universal Trimmer Head work on a Stihl FS 56 Trimmer?

This question is from Speed-Feed 400 Universal Trimmer Head
Asked by
Little River, SC
Read all my Q&A
July 20, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Read all my Q&A
October 7, 2014
Answer: 
Yes there is a green bushing 10mm x 1.0 included that fits FS 56.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
US
Read all my Q&A
August 20, 2014
Answer: 
Yes it will work on the FS 56.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
US
Read all my Q&A
August 20, 2014
Answer: 
Yes it will fit the FS56 straight shaft trimmer.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
July 21, 2014
Answer: 
FS 56 model is not listed, but if it is straight it should fit with the one of the adapters inside used for Stihl products.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
3 answers

Will this fit a sthil fs 38

This question is from Speed-Feed 400 Universal Trimmer Head
Asked by
Read all my Q&A
July 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Florida
Read all my Q&A
Home Improvement Profile: Professional
July 27, 2016
Answer: 
chances are that it will.......diferent adapters are included to fit different trimmers.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
July 26, 2016
Answer: 
The Speed Feed 400 Universal Trimmer Head, #99944200907, is compatible with the Stihl model, FS38.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 25, 2016
Answer: 
No, it won't fit a Stihl FS 38.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

WHAT kind of line comes on it

This question is from Speed-Feed 400 Universal Trimmer Head
Asked by
Read all my Q&A
June 23, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
June 28, 2016
Answer: 
The Speed Feed 400 Universal Trimmer head, #99944200907, will come with 20 feet of ECHO's Cross Fire .095" trimmer line.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
June 28, 2016
Answer: 
The Speed Feed 400 Universal Trimmer head, #99944200907, will come with 20 feet of ECHO's Cross Fire trimmer line.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Onaway, MI
Read all my Q&A
Home Improvement Profile: DIYer
June 26, 2016
Answer: 
About 6' of standard .095" Echo brand line.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 5 6 »
  • 2016-07-29 T15:09:05.640-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204159249, prod, sort_default
2 3 4 5 6 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 20ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 59 reviewers.
Rated 5.0 out of 5.0 by Echo Speed Feed 400 I recently purchased the Echo Speed Feed 400 for a commercial trimmer that it did not fit and I just thought I wonder if this fits on my Toro commercial string trimmer with the Expand It straight shaft trimmer attatchment that I purchased from HD.......and it does. I then tried it on my Ryobi 40 volt trimmer with the Expand It Attatchment and it fit also. So far it seems to be a nice upgrade over the factory installed trimmer head. There are some questions about the product where the answer says it won't fit the Expand It straight trimmer attachment so I have included a few pics to verify the fact that it does. It loads and feeds the trimmer line very smoothly and as far as the reviews that say it doesn't last and it wears out fast .......I guess only time will tell. If that be the case I will post an update. I am honestly posting now for those who want to purchase the Echo Speed Feed 400 for the Toro or Ryobi and I can only guess but it is almost a 100 percent positive guess that it will also fit the Homelite Expand It straight trimmer attatchment also since all are made by Techtronic Industries To get the Echo Speed Feed 400 to fit on the straight shaft Expand It Trimmer attatchment. You will need to remove the factory installed adapter bushing (see pic) using two16 mm wrenches or a wrench on the bottom hex and a socket.on the top adapter. They are left hand threads so loosening is turning the adapter in a clockwise manner. Clockwise and counter clockwise are determined as you are facing the bolt or adapter bushing looking at it from the top. After removal of the factory adapter ( see pic) you will see the threaded shaft that the Speed Feed 400 adapter bushing must thread on to. You will need to remove the installed adapter pressed into the Speed Feed 400 trimmer head since that is not the correct one for the Expand it attatchment. You will have to disassemble the Speed Feed 400 head to remove the factory installed threaded adapter. No worry it presses out with just fingertip pressure but it comes factory pre installed to fit Echo Shindaiwa products and not Expand It attatchment trimmers. Take pics of the Speed Feed 400 on your phone or some type of photographi device or video as you disassemble it to help with reassembly if need to. It will be easier to reassemble the trimmer head without the trimmer line installed plus it will give you an idea as to how it works also. Also the trimmer spool can be installed backwards if disassembled and the reassembled incorrectly. It comes pre installed for straight shaft left hand rotation trimmers but it can also be reversed for curved shaft right hand rotation trimmers as well so make sure the L is facing out. A piece of tape or mark on the trimmer line spool on the side facing out or the ground side as you are trimming with it will help with the correct orientation as you reassemble it. As long as you see the L however meaning for left hand rotation straight shaft trimmers you have installed it correctly. If you see the R then you should be installing the Speed Feed 400 on a right hand rotation curved shaft trimmer. Find the adapter bushing in the Speed Feed 400 kit that fits the Expand It attatchment threads and press this one in place of the factory installed adapter bushing installed in the same way as the one you removed. Reassemble the Speed Feed 400 without trimmer line after installing the correct adapter bushing and thread it onto the Expand it shaft. it threads and tightens in a counter clockwise rotation. Remember they are left hand threads and loosening and tightening are opposite the more popular right hand threads. Now you will also see how easy it is to load the trimmer line and as you use your new Echo Speed Feed 400 trimmer head on your Ryobi Toro Homelite Expand it straight shaft trimmer hopefully your experience will be a pleasant one also. June 13, 2016
Rated 5.0 out of 5.0 by 75 No Main Street, Heber City, Utah 84032 we run 10 string trimers 8 hours a day and I have found that the speed -feed trimmer heads are very easy to reload and easy to replace when they wear out. I recommend this product July 19, 2016
Rated 5.0 out of 5.0 by Better than the Echo U-Turn I really like this trimmer head. Very easy to load and feeds easily. Can also purchase a replacement cap when the cap wears out. Only drawback is that the directions are slightly difficult to understand. Stihl trimmers need the green bushing installed in the head instead of the pre-installed one. July 26, 2016
Rated 3.0 out of 5.0 by Average to better trim head I have an Echo trimmer so all the attachments are unnecessary - instructions don't say that. Missing tool to remove old head, probably should be included in package. Instructions to reload new trim line were cartoonish and did not explain process very well. However, it works well and was easy to reload the new line. One problem is that the lower half is a two prong friction fit attachment. I see this wearing out very quickly and me being in need of another trim head. Planned obsolecence....... June 14, 2016
Rated 5.0 out of 5.0 by Super easy Installation The speed feed 400 slipped right on my old echo weed wacker 1990 with ease and it works great. July 5, 2016
Rated 5.0 out of 5.0 by Update weed echo weed eater Fair price went to pick up the tire for rider lawn mower..Seen this echo line end was inpressed with the way the line was replaced so I up graded my echo to the newer style I am happy with it. June 28, 2016
Rated 5.0 out of 5.0 by Loading String Is Not a Chore Now! I have mowed lawns for 20+ years now, and have never used a trimmer head that is this easy to load and it still operates as good as any trimmer head I have used before. This is the only one I will use from now on! Cut a 15-20' piece of trimmer line, feed it through the eyelets evenly, twist the head to load the trimmer line, and take off trimming again! Be sure to hold the top piece of the trimmer head that meets your trimmer shaft while twisting the actual trimmer head to load the trimmer line. You can load the line in 20-30 seconds!!! Fit perfectly on our Redmax Trimmer. May 17, 2016
Rated 1.0 out of 5.0 by JUNK! will not advance line, or snaps line off at exit holes, is easy to load but that's it, have to manually advance line. June 18, 2016
  • 2016-07-29 T15:32:26.694-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_59, tr_59
  • loc_en_US, sid_204159249, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms
  • REVIEWS, PRODUCT