Rated 4.1 out of 5 by 15
Rated 4.0 out of 5.0 by Suzie First Layer Really Soaked In
I used this product after neutralizing the acid stain on my floors. I bought two gallons to use on 400 sq ft. I got worried when I had to stretch the first gallon to make it all the way across. Apparently only the first layer really soaks in. Once it was sealed, the next two layers went on very thin.
August 23, 2016
Rated 4.0 out of 5.0 by Danita Good Product
This product definitely works. The chemicals are strong so would recommend a mask if you are not outdoors.
August 23, 2016
Rated 5.0 out of 5.0 by Rcoryw Good Sealer for Acid-Stained Concrete
This sealer was easy to apply with sprayer and provided a low-sheen, durable finish that helped improve and darken the acid-stain color.
June 7, 2016
Rated 4.0 out of 5.0 by Divekeys Armor seal water based
This product worked as expected. For some reason they did not sell the non-water based version which has a more glossy finish. The finish with this was like a damp finish, slightly glossy. I also got the polish which will improve the gloss. It really all boils down to the finish of the concrete. The smoother the concrete the more glossy it will be.
May 3, 2016
Rated 5.0 out of 5.0 by DC Thin coats required
Easy to apply, sprayed on the sealer and back rolled with a 1/2" nap roller keeping each coat VERY thin. If you apply this sealer thick in any areas it will haze. This is a property of all acrylic sealers. The finish is more satin than gloss. I chose not to apply a second coat since there were some areas that were thicker than others and I did not want to chance fracturing or haze in the top coat.
Excellent product. Will use again when I seal my sidewalk/driveway.
Can't speak yet to the durability since it was just recently applied.
July 21, 2015
Rated 1.0 out of 5.0 by sr Leaves Milky Look
Product dried leaving a milky look on outside patio after acid staining. Stain came out great but this product ruined it.
June 14, 2015
Rated 5.0 out of 5.0 by Mudcat Eagle Armor Seal
Eagle Armor Seal worked excellent on my newly acid stained concrete. I was in a quandary whether to buy a mineral based high gloss product or this water based matt finish product. The mineral based sealer will look like the concrete does when it is wet (darker more vivid) and the water based sealer will look like the concrete does when it is damp (more muted but nice). The product went on well with no roller marks when it was dry. It was glossier than I expected. Very pleased overall but only down 1 month- long term I do not know.
August 15, 2014
Rated 1.0 out of 5.0 by Jagga11 Was not close to a semi-gloss look
Stained concrete with Eagle rust acid stain and manufacturer recommended this gloss for indoor concrete. Once it dried it barely made any difference in the sheen, not even close to a semi-gloss look. I had to put another vendors' gloss on top to get a better look. I know this was not their high gloss coat but it should not be advertised as a Semi-Gloss. If you want the wet look for your stained floor use a Solvent based ( not water based) high gloss coat.
June 16, 2014