Rated 4.7 out of 5 by 78
Rated 5.0 out of 5.0 by Dhillon Makes the driveway look clean
I bought two of these 5-Gal concrete sealer, i have over 2000 sqft of exposed driveway. i applied one coat only and the whole driveway looks amazing. here are the pros and cons:
coming up to 3 months and it still looks good
when the sun hits the concrete it gives it that extra clean shine
did not find it slippery to walk on
rain stays on top
the solvent is strong, so you will have to wear a mask and glasses.
newly laid exposed concrete soaks up more
i will get another next year to seal it further
August 20, 2014
Rated 5.0 out of 5.0 by Texman The product has been great so far
The sealer was applied with a 9"- 3/8" nap roller on outside stamped concrete in one coat.. It covered very easily and took less material than the manufacturer indicated. I followed a previous raters suggestion and waited until the portion of the patio that received sun was shaded. I plan to apply another coat to that portion with the excess material resulting from the coverage issue.The patio looks better than it did when new about 4 years ago. I hope to report that the patio still retains its wet look in a subsequent rating a year from now.
May 31, 2014
Rated 5.0 out of 5.0 by Bailey Better Buy
Easy to apply. Follow instructions when applying. Make sure the humidity is low the day you apply if outside. High humidity makes the sealer string. Makes the acid stain concrete look totally different when applied.
July 15, 2014
Rated 5.0 out of 5.0 by BonS Renews stamped concrete and edging easily.
Easy to use with a roller. Apply generously but don't get it excessively thick in areas or it will bubble while drying. As always, two or more coats is better than one thick one. Some of my stamped concrete had begun to sun fade because the clear coat had worn out. I used a water-based "TiqueWash" to restore and even-out the stamped concrete stain. After letting the TiqueWash dry overnight I followed up with two to three coats of the gloss clear coat. My stamped concrete looks as good, or maybe even better, than new. The TiqueWash comes in quite a few different colors. I used "Seasoned Earth" to enhance the dark areas and blend everything together. I'm not selling TiqueWash I'm just a happy customer.
October 21, 2014
Rated 5.0 out of 5.0 by Fauxqueen Fantastic product
Far, far better than the waterbase sealer we've used previously. This stuff is the real deal!
We didn't really notice the smell problem others have mentioned, but we were using it outside, sealing the concrete slab around our pool and all our new retaining walls and stepping stone pathways. The product went on easily with a paint roller on a pole. We used the large-size roller trays. Following directions, we applied it and then every 5 feet or so we went back and rolled in the opposite direction to even it out. Went on beautifully and dried quite quickly. Brought out the colors in the stepping stones and in the concrete. We applied a second coat 2 days later to all the stepping stones to protect them from the dogwood berries which make terrible red stains on untreated surfaces. This seemed to solve the problem. When it rained, we were thrilled to see the rain beading up on the surface. When it needs refreshing (hopefully not for several years) we will definitely be re-applying this same product. Wouldn't use anything else now. We're sold on Eagle Gloss Coat.
December 6, 2014
Rated 5.0 out of 5.0 by Avid great product very satisfied would purchase again
Product is so easy to work with 1 application did great second application was wow it looked and stayed lookin very wet this item is fantastic.
May 20, 2014
Rated 5.0 out of 5.0 by IronViking Very pleased with results
Easy to apply and looks great! Used about half of the bucket to apply 2 coats on patio, 360 sqft of cement molded cobblestone pavers. Definitely need to wear respirator when applying and make sure windows are closed! Wouldn't apply inside without the proper ventilation or respirator!
September 5, 2013
Rated 5.0 out of 5.0 by DIYBill Stamped Patio Quality Product Looks Great
I just put down the second coat yesterday and this morning it looks great. My previous sealer was xylene based so I prepared by using some diluted krudcutter and a stiff brush followed with a pressure wash. I didn't want to remove the lid so I emailed the company about stirring it up. I was told the clear is not required to stir, but I did gently roll the can back and forth a few minutes prior to use. I poured some into an over sized metal paint pan with a metal paint roller grate. I used a polyester 9" 3/4 nap first coat and 1/2" on the second. The day I put down 1st coat temp was 60s over cast and about 75% humidity. The remnants of old sealer melted in with the new, it dried very nice. Second coat went down yesterday, similarly 60s and overcast 65% humidity. This morning I am very impressed with how it flowed and cured up. The night dew didn’t affect it. Nice shine brought out the color which I thought was lost to the Florida sun. I would not use indoors as vapors are very strong during the process.
January 17, 2015