Rated 4.5 out of 5 by 12
Rated 5.0 out of 5.0 by Wonder Eagle Paver Sealer Looking Good
I really like this sealer. I initially just used it on my covered lanai. It transformed dry, scuffed pavers into looking like they were new. Actually probably better than new as it gave them a low-lustre shine and covered all scuff marks with a single coat. For my driveway that's exposed to full Florida sun & weather, I'm applying 2 coats hoping the acrylic holds up a number of years. After 2 coats the shine increases to what I would call semi-glossy. I like this as I didn't want a full gloss look. Also I noted that slipperiness when wet doesn't seem to be a problem. This sealer coats the sand in the paver joints like a hardened glue, so hope this effect lasts years as well and I won't need to keep refilling joints with new sand. Remember to avoid getting pavers wet for first 24 hours after applying. When I first painted front walk pavers, the sprinklers ran that night. White spots resulted. All I had to do was repaint the pavers with another coat and the spots fully disappeared.
March 5, 2015
Rated 4.0 out of 5.0 by Wonder Garage Door Seal Sticks
I applied 2 coats of this sealer about 3 months ago, gave it 3 days to dry and it looked great. I still like the looks although there is some minor hazing around the edges of several pavers. I would still recommend it & use it again. However wanted to post this warning to others - started having problem with my garage door after 2 months. It started severly jerking when it began to open. I thought I'd have to call for a GDO service. Then I looked closely at the bottom seal where it rested on the sealed pavers. It had a black sticky build up - like glue. I live in FL & the pavers get really hot.I think the garage door bottom rubber seal reacted with the chemical in the sealer. Anyway I used glue remover & a steel scraper to remove as much of the build up as I could.Of course the pavers don't look as good after the scraping, but the garage door now opens normally. Not sure what will prevent this from coming back, but will apply a rubber protectorant to door seal every month to see if that helps.
May 2, 2015
Rated 5.0 out of 5.0 by TJ1960 Exactly what I needed
I had an issue with the pavers on my pool deck. The sand would wash away and I would get weeds growing between the bricks. After pressure washing the pavers I swept in a water-activated polymeric sand mixture and then sealed the area with this Eagle acrylic sealer. This solvent-based sealer helped lock in the sand and has kept out the weeds for over two months. Part of my pool deck is exposed to the sun and the rest of the area is under an overhanging roof. The pavers exposed to the sun were a bit lighter in color and seemed a little duller or rougher-looking. The sealer brought back the color in the pavers and gave them a permanent sheen, and the pavers have a uniform appearance now. The pool deck looks as good as it did when it was installed in 2007.
I applied the sealer using an 18" roller (3/4" nap) and an extension pole and was able to cover approximately 500 square feet of patio in a couple of hours. Coverage was as advertised at 100 SF/ gallon. The surface was dry to the touch in about 4 hours. I only applied one coat, and the water beads nicely as seen in one of the photos. A second coat would have yielded a shinier surface, but I preferred the more satin look. I was pleased with the results and would buy the Eagle paver sealer again.
July 27, 2015
Rated 5.0 out of 5.0 by Dennis Makes pavers look nice
Used a 3/4 nap roller to get into the joints better, worked well. Darkens pavers, looks nice. Puts a slight sheen on pavers. Put sealer on a week ago, fumes still strong, would not recommend applying this if you plan to use the area in near future (like a patio party. . . )
May 5, 2015
Rated 5.0 out of 5.0 by lasterjl Excellent Product!
I rolled it on my paver patio with a 1/2 nap and a brush for edging and in between some of the pavers as well as my stone seating bench and fire pit. I achieved the wet look I expected and very pleased with the outcome!
April 26, 2015
Rated 4.0 out of 5.0 by dhays328 Used a sprayer for mine
I tried a roller but it didn't work well for me. I ended up spraying it on. Not sure why they say not to unless is puts too many VOCs in the air. Anyway the sprayed on pavers look great after 2 coats. We'll see how it holds up in the FL sun.
July 3, 2015
Rated 5.0 out of 5.0 by Dave LOOKS GREAT
I just used this to seal my driveway pavers, limestone deck and a lot of natural river rock columns and foundation. The sealer really enhanced the color and character of these materials. I had previously used two other sealers and this worked the best by far-I hope it holds up over time.
June 17, 2015
Rated 5.0 out of 5.0 by DMSR Very good paver sealer
I used this product as a paver and joint sealer. More product is used but the results are very good and about 1/2 the price of using joint sealing sand where I have had sporadic results. Used a 1/2 in nap and soaked the roller to ensure the joints are sealed. I used about 17 gallons to thick coat about 800 sq ft. No hazing, will be tacky for a few days but we could walk on it after 12-18 hrs. We're in MI and have had some humid days that can prolong the tackiness. Chose solvent base because it is more forgiving than water base. Looks great and is very durable.
June 27, 2014