Model # BR2100CS

Internet #202959642

Store SKU #533124

Eaton 100 Amp Double-Pole Type BR Circuit Breaker
0782116630523

Eaton

100 Amp Double-Pole Type BR Circuit Breaker

$43.22 /each

Frequently Bought Together

Product Overview

Eaton provides product and service solutions for new residential construction for single-family and multi-family homes, as well as upgrades and replacements for existing homes. The Eaton Cutler-Hammer 100 Amp Double-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

  • Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
  • Amperage rating: 100A
  • Double pole breaker
  • Trips to center position - must turn off then turn back on
  • For use in type BR load centers
  • Type BR breakers are UL approved genuine replacement breakers for load centers made by Westinghouse, Challenger and Bryant
  • Interrupt rating - 10 kAIC
  • Voltage rating is 120/240V
  • Wire size - #4-2/0 AWG Cu/Al at 60°C or 75°C
  • Learn More About Circuit Breakers Here in our Buying Guide.
  • Note: Product may vary by store



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

what is the wire size range of this 100 amp breaker

Asked by: buzz
100 Amp, 2-Pole, BR Plug-On Circuit Breaker, 10 kAIC, Wire Size #4-1/0, 120/240 VAC.
Answered by: glen
Date published: 2017-02-10

Can this breaker be used as an on/off switch ?

Can this breaker be used as an on/off switch ?
Asked by: Dusty
Circuit breakers are not intended to be used as one off switches, they will rapidly fail if used as switches.
Answered by: CommunityAnswer
Date published: 2017-02-02

Just received a 68c9924g47 30/40 Eaton circuit breaker from you. Not installed it yet but am concerned that the 30 side

Seems to trip with the slightest touch could it be defective???
Asked by: jim
It's not uncommon to receive a defective breaker. You may want to check the actual current with a clamp on meter before just replacing it though.
Answered by: SolarBear
Date published: 2016-09-21

you would fit in cutler hammer panel

Asked by: Van
Typically these will fit physically in a Cutler Hammer panel. You need to go to the Eaton website and confirm they are listed for the purpose. They have a nice graphic showing their fit.
Answered by: SolarBear
Date published: 2016-09-21
  • y_2017, m_4, d_24, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_202959642, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms
  • QUESTIONS, PRODUCT

Customer Reviews

100 Amp Double-Pole Type BR Circuit Breaker is rated 4.3 out of 5 by 3.
Rated 3 out of 5 by from Replacement Main Breaker I intalled my new breaker and it wouldn't work. It was my rental unit, so I reinstalled the original so I could go get another one. When I turned the old one back on,it no longer overloaded.Appears there was a slightly loose aluminum wire causing the breaker to heat up and trip. Upon checking the new breaker, it appears the new breaker was shipped in a tripped position. I am not going to reinstall it to make sure when I no longer have an issue, so I have a new breaker I will probably never use. I guess at least my tripping breaker problem is solved. I am recommending it assuming I overlooked it being probably being tripped. I guess I could do a continuity check to verify it works properly.
Date published: 2017-02-21
Rated 5 out of 5 by from The right mains breaker at the right price Replaced a 48 year old breaker. Worked Great! PG&E came by and disconnected the power by removing the meter and installling the safety shield, It took only minutes for installation. The technician came back and reinstalled the power and voila! No more intermittent power!
Date published: 2016-12-09
Rated 5 out of 5 by from easy install Easy install, even with hot wires. Remove from breaker box prior to swapping out
Date published: 2014-06-04
  • y_2017, m_4, d_24, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_202959642, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 85ms
  • REVIEWS, PRODUCT