Eaton 15 Amp Single Pole Combination Type Fireguard AFCI BR Type Breaker-BR115CAFCS - The Home Depot


Model # BR115CAFCS

Internet # 202276733

Store SKU # 258530

15 Amp Single Pole Combination Type Fireguard AFCI BR Type Breaker

Eaton 15 Amp Single Pole Combination Type Fireguard AFCI BR Type Breaker

This item has been discontinued.
The Home Depot no longer carries this specific product.

$37.97 / each
Bulk Price Discount Available
This item qualifies for a bulk price discount
if you purchase at least 6 units. The
adjusted price will display in the Cart.


Model # BR115CAFCS

Internet # 202276733

Store SKU # 258530

The Eaton 15 Amp Single-Pole Arc Fault Interrupter Circuit Breaker safely trips to the off position to help prevent a potential fire. This circuit breaker is designed for low-level arc detection for connected cords. This plug-in circuit breaker is rated to 120/240 VAC and offers UL, CSA and ANSI safety listings.

  • Provides low-level arc detection down through the connected cords
  • Trips to the off position and can be reset safely and easily
  • Helps mitigate a potential fire
  • Meets UL, CSA and ANSI safety requirements


Assembled Depth (in.)  2.927 in  Assembled Height (in.)  4.55 in 
Assembled Width (in.)  .981 in  Product Depth (in.)  2.927 
Product Height (in.)  4.55  Product Width (in.)  0.981 
Electrical Product Type  Breaker  Maximum Amperage (amps)  15 A 
Mounting type  Plug In  Number of Poles 
Power Distribution Features  Arc Fault Interrupter  Product Series  BR 
Product Weight (lb.)  0.45 lb  Returnable  90-Day 
Voltage (volts)  120/240 
Warranty / Certifications
Manufacturer Warranty  10 Years 


Rated 5.0 out of 5 by 1 reviewer.
Rated 5.0 out of 5.0 by Installed in a Murray Model # LW1224L1125 load center ... As part of an EV charger station installation, I had to have a new 100A sub-panel installed and the circuits for two bedrooms relocated to the sub-panel. The original circuits did not have AFCI breakers. The first set of AFCI breakers we tried were Murray Model # MP115AFCP. They tripped immediately on turning them on and the LEDs indicated arc and ground faults. Suspecting that perhaps the breakers were faulty, another brand new set was tried with the same result. I tried to locate any shared neutral issue or neutral to ground contact in the circuits and could not find any. In exploring the issue in the internet, I discovered that Eaton offered replacement breakers for Murray, but they were not stocked by local retailers. Out of curiosity, I decided to try these Eaton AFCI breakers in the panel. The dimensions and the physical design suggested that they should fit in the panel. They were a bit hard to push in place and harder to pull back out but they fit well in the panel. More importantly, these breakers did not trip immediately on the two bedroom circuits. The TEST buttons trip the breakers as they should and are able to be turned ON after resetting the trip. I am not really sure why the Murray AFCIs fail to work on these circuits while the Eaton AFCIs do, but I am happy to have an AFCI breaker on the bedroom circuits. January 27, 2014
1-1 of 1


Store Exclusive. This item is available for purchase in select stores only.