0782114203743

Eaton

Model CHU4N7NS

Internet #100116200

Store SKU #400300

Power Outlet Panel - Un-Metered

$104.00 /each

Frequently Bought Together

Product Overview

The Eaton Cutler-Hammer 20/30 Amp 2-Space 2-Circuit Unmetered Temporary Power Panel is designed for outdoor electrical service to meet temporary power requirements. The temporary power panel is for use at construction sites, RV parks and service entrance applications. The power panel features a removable upper dead-front cover and a lower dead-front cover that rotates 90 Degree for easy routing of incoming wire.

  • Use for temporary outdoor power at construction sites, RV parks and service entrance applications
  • Rugged, heavy-duty galvanized steel enclosure
  • Aluminum buss
  • Doors can be padlocked to prevent power theft and vandalism
  • ANSI certified and UL listed
  • Assembled, pre-wired and factory tested
  • Click here for more information on Electronic Recycling Programs

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions11 Answers

Customer Questions & Answers

Power Outlet Panel - Un-Metered
Power Outlet Panel - Un-Metered

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Power Outlet Panel - Un-Metered
 
4 answers

Which voltage do I use for voltage drop calculators, 120 or 240?

This question is from Power Outlet Panel - Un-Metered
Asked by
Read all my Q&A
April 19, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
California
Read all my Q&A
Home Improvement Profile: DIYer
September 3, 2016
Answer: 
Wherever this box is powered from, there should be an over current disconnect at that location. Normally the disconnect would be a circuit breaker in a panel board to protect the feed wires to this box. There are two possible wiring options when running feed wires from the panel board to this box. Since both outlets are 120-volt only, the feed wires could be a single current carrying conductor, a single Read More
Wherever this box is powered from, there should be an over current disconnect at that location. Normally the disconnect would be a circuit breaker in a panel board to protect the feed wires to this box. There are two possible wiring options when running feed wires from the panel board to this box. Since both outlets are 120-volt only, the feed wires could be a single current carrying conductor, a single neutral wire and a single ground wire (three wires total) protected by an appropriate over current disconnect based on the capacity of the feed wire size such as a single pole breaker in the panel board. A better (more efficient) method to supply the box is to use two current carrying conductors, one neutral wire, and one ground wire (four wires total). The panel board would then contain an appropriate single throw double pole 240 volt breaker (engaging two stabs in the panel board) and each of the two current carrying wires would be connected to one each of the double pole breakers in the panel board and one each of the two 120 volt breakers in the box (240 volts of voltage measured between the two current carrying conductors). Those familiar with feeding sub panel boards will realize this box is dealt within the same fashion. Using four wires rather than three, allows for a common neutral, smaller feed wire gauges all around, and reduced voltage-drop when both the 30 amp and 20 amp outlets are in use. The correct voltage to use for voltage-drop calculations is 120 volts. However, there will be less voltage-drop for any gauge wire selected when the current carrying wires conduct lower amperage. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Dallas TX
Read all my Q&A
Home Improvement Profile: Professional
August 25, 2016
Answer: 
In the panel pictured, you would use 120 volt. both the 20 amp and the 30 amp receptacles are 120 volt. There is one 20 amp 120 volt breaker and one 30 amp 120 volt breaker.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
CT
Read all my Q&A
June 28, 2016
Answer: 
This is a 120 volt box only, so figure it from there.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
April 28, 2016
Answer: 
Both, depending upon what is trying to be accomplished. The 30 amp receptacle is using 240V and the 20 amp receptacle is using 120 volt. 240 Volt is the system voltage and is normally used. Again, depending on what need to be measured.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from Power Outlet Panel - Un-Metered
 
2 answers

Can you tie the existing circuits to external outlet boxes?

This question is from Power Outlet Panel - Un-Metered
Asked by
Anchorage AK
Read all my Q&A
March 4, 2016
I am hoping to run a circuit from this box to another outlet a short distance away.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
California
Read all my Q&A
Home Improvement Profile: DIYer
September 3, 2016
Answer: 
Yes and no. The 30 amp RV outlet is a dedicated outlet and no branch circuits should be added to this circuit. The 20 amp ground fault outlets can support a branch circuit to additional 120 volt, 20 or 15 amp outlets. There are terminals on the back of the 20 amp ground fault outlets for connecting a branch circuit that would then have ground fault protection.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
CT
Read all my Q&A
June 28, 2016
Answer: 
I would think you can, as long as you keep the proper size wire and keep in mind the maximum amps.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Power Outlet Panel - Un-Metered
 
1 answer

Does the panel come with the breakers and plugs? Or will those need to be purchased seperate?

This question is from Power Outlet Panel - Un-Metered
Asked by
Texas
Read all my Q&A
July 27, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
CT
Read all my Q&A
Home Improvement Profile: DIYer
July 29, 2016
Answer: 
Yes, both plugs and breakers are installed already.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Power Outlet Panel - Un-Metered
 
1 answer

Can the power feed come in the back and surface mount the box?

This question is from Power Outlet Panel - Un-Metered
Asked by
Read all my Q&A
July 6, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
CT
Read all my Q&A
July 8, 2016
Answer: 
Yes, there is a knock-out on the back for surface mounting.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T12:54:03.494-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100116200, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 6 reviewers.
Rated 5.0 out of 5.0 by Robust RV Outlet Box This is a well designed RV outlet box offering several installation options. It comes complete with everything but the fasteners to attach it to a mounting surface. The receptacles themselves grip the plugs tightly for maximum current flow and minimum voltage loss. The circuit breakers allow for disconnecting power before plugging in cords if desired. The access door offers weather proof protection when closed and has slots to slide back to hold open if desired. Good quality fit and finish that should give many years of dependable service for both commercial or residential applications. September 7, 2016
Rated 5.0 out of 5.0 by RV Hookup Worked very well for my application. Came with everything I needed and already pre- wired. Satisfied with purchase. August 2, 2016
Rated 5.0 out of 5.0 by Power Outlet Panel This outlet box is just what I was looking for. Now I can plug in my 120 volt, 30 amp camper plug. It also has a 120 volt, 20 amp household outlet. I had to flip the household outlet 180 degrees, so the ground lug was at the bottom. It allows a side oriented plug to exit out the bottom opening, to allow the lid to close and be weather proof. The separate circuit breakers are good to have, so a plug can be inserted before the power is turned on. June 28, 2016
Rated 5.0 out of 5.0 by Very happy Easy installation wired it up turned on the breakers plugged in the RV all good, I brought one more for a guest RVer May 3, 2016
Rated 4.0 out of 5.0 by Product was as expected, almost The item appeared to be a well built unit and would have worked well in my case except I was planning on mounting it on a 1-1/4" conduit from the underside and this unit did not have this as a knockout option. The description does not provide knockout information. I returned this unit and replaced it with the 50/30/20 amp version of the same brand which met my needs perfectly with better versatility for only about $10 more. March 10, 2015
Rated 5.0 out of 5.0 by ALL WAS EXCELLENT EVERYTHING ABOUT MY ORDER WAS SUPER FREE SHIPPING AND PRICE WAS PERFECT AND THE PRODUCT IS OF GREAT VALUE September 27, 2011
  • 2016-09-08 T13:52:13.543-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_6, tr_6
  • loc_en_US, sid_100116200, prod, sort_default
1-6 of 6
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • REVIEWS, PRODUCT