Model # 06handtrimmer

Internet #204217345

null Edgemate Hand Trimmer for 2 in. x 3 in. x 1 in. to trim Real Wood and Melamine Edgebanding

Edgemate Hand Trimmer for 2 in. x 3 in. x 1 in. to trim Real Wood and Melamine Edgebanding

Frequently Bought Together

Product Overview

Edgemate's hand held trimmer is designed to trim the excess edgebanding material after it has been applied. The trimmer cuts in both directions for a smooth, clean edge. The small, compact trimming tool is ideal for use after applying edgebanding that is wider than the substrate.

California residents: see   Proposition 65 information

  • Cuts in both directions for smooth, clean edges
  • For use on most edgebanding and edging products up to 3.0 mm thick
  • User friendly and perfect for DYI projects
  • Contractor preferred
  • From America’s oldest and largest producer of veneer products - Edgemate
  • Click to learn how to select the right lumber for your project




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

Edgemate Hand Trimmer for 2 in. x 3 in. x 1 in. to trim Real Wood and Melamine Edgebanding is rated 2.7 out of 5 by 3.
Rated 4 out of 5 by from It works fine I decided to try this despite the other two reviews. I used it to trim edgebanding on a melamine/TFL closet system i was building. I let the edgebanding sufficiently dry before trimming it and entered the edge part way in to cut diagonally in, then ran it the rest of the way keeping pressure on the forward edge of the cutter. It cut nice and flush and left a smooth cut. I wouldn't recommend using it on the ends though as it needs some surface area to cut against. Just use a razor to cut the ends.
Date published: 2014-12-07
Rated 1 out of 5 by from Eats veneer Maybe I got a dud, but just about everything about this didn't work right. The blades seem dull, it was more like chewing and pulling the veneer than cutting it. It has 2 blades, and mine didn't appear to be seated right, one sits much higher than the other. It also didn't move very smoothly along the wood surface, even though it was unfinished wood sanded to 220 grit, so it was smooth and didn't have any finish that would grip. Not moving smoothly was a problem as there isn't much to hold onto here. This might be ok for plastic/laminate veneers & pvc, but I would definitely look elsewhere if you plan to use it with wood.
Date published: 2014-04-30
Rated 3 out of 5 by from Just OK Have used this on about a 100 linear feet of edge banding. Would not buy again. Faster and cleaner cuts with router and trim bit. Trimmer flexes to much. Inconsistent cut depth. Frequently requires multiple passes. Inconsistent thickness in plywood will sometimes cause it to peel the veneer. Have to watch grain direction closely to avoid tear out. Better to sand small high spots then use the trimmer.
Date published: 2014-06-24
  • y_2017, m_3, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_204217345, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms