Rated 4.4 out of 5 by 42
Rated 4.0 out of 5.0 by Bob Worked Great for my Computer/Study Desk.
I bought these legs for a computer desk I was putting together. I wanted it to have adjustable height, and be sturdy, while still being affordable.
These legs are quite sturdy, have an excellent range of adjustable ht, are affordable, and are easy to assemble.
The only problems I have found with them are that I have to get someone to help me hold the desk's top up while I adjust the height, so there is some room for improvement in that area. Also, the legs' bottoms were catching in my carpet, so I got some cheap sliders for them.
Overall, it worked out quite nicely I put together a nice, affordable, adjustable ht desk without needing any real carpentry skill. Would recommend these legs for similar projects.
July 10, 2016
Rated 4.0 out of 5.0 by ssgc Nice legs!
I used these workbench legs for an industrial style desk. The gray color is perfect. Very sturdy. You do need add a bottom piece of wood/metal to keep the lower legs in place. Overall very solid. Thinking of adding to my garage workbench with these. Electrical knockouts are a bonus.
May 31, 2016
Rated 4.0 out of 5.0 by Industrial Works as described
You'll need to add bracing along the bottom or back, then table is very sturdy.
June 14, 2016
Rated 5.0 out of 5.0 by szak OK, Just as described
Easy to assemble, very sturdy. Box was badly damaged in shipment, but contents unaffected.
May 31, 2016
Rated 4.0 out of 5.0 by Naptown Sturdy Workbench Legs
I bought these to make rolling benches for projects and one as an out-feed table for a table saw. The construction is heavy duty, but not perfect. While I am pleased with the legs and they are a good value there are a couple of points worth noting. First, if you intend to add casters to the legs, the bottom flange is drilled for 3/8in. That's fine. But the flange is simply a bent over piece of the leg steel - meaning once you attach a post style caster and add weight that flange will bend. I added small wood blocks drilled for 3/8in. that extend out enough so the full leg is supported. And that does the trick. The second point is the holes for the shortest leg length don't align - off enough that the supplied bolts do not fit. This wasn't a problem for me, but if I needed that short length I'd need to enlarge the holes so they meet and a bolt can be inserted. Otherwise, these are sturdy leg sets and a good value for anyone's workshop.
May 4, 2016
Rated 5.0 out of 5.0 by Biglou Awesome DIY workbench legs
They came in a box and were easy to assemble and use. I used 3/4 inch interior plywood for the top. I cut it 30 inch deep and used the remaining 18 inch piece for the back of the legs and used a 1/2 inch piece of plywood for the lower shelf (foot rest height) . I added a 4 inch solid concrete block to the lower shelf under it to provide rigidity and give the ability to put heavy objects on it and not bow. Works great I covered the top with exterior grey rug material and used a 4 inch board for the back of the top to form a backstop all covered with the rug material. Looks great!
October 14, 2014
Rated 5.0 out of 5.0 by Robgreen111 They Work
These legs work as advertised. Pretty basic; but solid & strong.
February 10, 2016
Rated 5.0 out of 5.0 by Bill Just what I wanted
These legs and a 4'x4' sheet of decking = instant work table
January 26, 2016