Edsal 60 in. W x 66 in. H x 18 in. D Steel Commercial Shelving Unit-ERZ601866PB3 - The Home Depot


Model # ERZ601866PB3

Internet # 202251083

60 in. W x 66 in. H x 18 in. D Steel Commercial Shelving Unit

Edsal 60 in. W x 66 in. H x 18 in. D Steel Commercial Shelving Unit

This item has been discontinued.
The Home Depot no longer carries this specific product.

$114.00 / each


Model # ERZ601866PB3

Internet # 202251083

The Edsal Steel Commercial Shelving Unit is constructed with heavy-duty industrial grade welded steel frames and beams for maximum strength and lasting durability. Featuring 3 particleboard shelves, each with a 1200 lb. capacity, the shelves conveniently adjust in 3 in. increments, allowing you to customize storage to suit your requirements. Easy to expand with the dual locking system in posts, this shelving unit assembles in minutes without tools, nuts or bolts.

  • Each shelf has a 1200 lb. capacity
  • Assembles in minutes with no tools, nuts or bolts required
  • Heavy duty welded frames and beams with a black textured finish that conceals dirt and grime
  • Shelves adjust in 3 in. increments to fit your storage needs
  • Expands easily using dual locking system in posts
  • Ships in 10 business days
  • Item ships in 10 business days
  • Made in the USA

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  18 in  Assembled Height (in.)  66 in 
Assembled Width (in.)  60 in 
Color Family  Black  Color/Finish  Black 
Material  Steel  Returnable  90-Day 
Storage Product Type  Free Standing Racks and Shelves 
Warranty / Certifications
Manufacturer Warranty  1 year 


Rated 3.8 out of 5 by 26 reviewers.
Rated 4 out of 5 by Solid shelves once they are assembled I bought 4 sets of these shelves that measured 20' long when put side by side. Assembly was easy once you get the hang of it but you must look over every piece carefully to make sure they are not bent or damaged. Thats where I ran into problems, there were 2 end pieces that were bent so badly that I could not use them so I had to hook the shelves together ( which you can do) and it worked out fine. March 19, 2013
Rated 1 out of 5 by Junk LIght weight steel..Leg bent and horrible welds. Horizontal beams not squared, welds off by 1/4 verticle. Took back to store. I was shocked at quality. Couldn't put on particle shelf, wouldn't fit, due to off weld. November 10, 2014
Rated 4 out of 5 by What I needed Packaged well and showed up on time. Only downside was the particle board inserts which did not even fit the shelves. Didn't matter to me I used 3/4 plywood anyway. November 4, 2014
Rated 1 out of 5 by dented and pieces missing The frames was dented. The box had no damage so it was shipped dented. We had to hammer it back into shape to get the pieces to fit. The shelf was not cut to the right size, we had to saw a half inch off each piece to get it to fit into the shelf space. Two cross bar pieces were missing but the hardware to install them was included. What a mess. October 27, 2014
Rated 4 out of 5 by Sturdy, Beware of Minor Defects This shelving unit is VERY sturdy and just what I needed for my aquarium tanks. The only problem is if the side braces have the slightest defect and are not perfectly straight, you will have a hard time fitting the connecting tabs into the brace. I wrestled with one for over an hour, before deciding to move the shelf down 3 inches. Do NOT tap down and secure the shelves until you have all of your shelves in place. You'll need some flexibility to fit everything. January 27, 2013
2 3 4 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.