Rated 4.2 out of 5 by 5
Rated 4.0 out of 5.0 by Phil Decent system for relatively low cost
The frame is well designed and built. It has convenient mounting holes already drilled in the feet. The frames and the rails were shipped together and shrink wrapped together. The forklift operator at HD bent up the frame support of one frame pretty decently trying to load it onto an open trailer. Once he picked up the pallet, the rails that weren't sitting on the pallet fell from the wrapping and got dinged up a bit. I don't know why the frames twist slightly when the rails are installed, but it happened on all three frames that were installed. They were squared, plumbed and leveled so I don't know the reason. The out of square made getting the wire rack shelving very difficult to get in. We were able to force them shelves in, but it still left a gap and we had to fasten the rack down with industrial tie wraps to keep them from popping up before weight was added.
Overall I am pretty satisfied with the frames as they do support a lot of weight and are relatively cheap.
January 27, 2015
Rated 4.0 out of 5.0 by Samson88 Steel Welder Frame changed my warehouse storage
During rain storm our basement storage in the warehouse flooded. A lot of products were damaged and we came to the conclusion that we needed to get everything off the ground in case flooding occurred again. We looked at all kinds of racks and this one appeared to be the best value. Upon installing them we realized how great they really are. The only issue is that the cross beams are so long that they can bend if too much weight is put on the self, however, you can purchase a support that will hold the beams together and prevent them from bending. Overall I am satisfied with the purchase and our storage space looks great.
September 16, 2014
Rated 3.0 out of 5.0 by JGMillar Good shelves, transportation is a challenge
These are decent quality, heavy duty shelves. Basically a mini-pallet rack.ifyou have a storage space where you need to put a lot of stuff, these are a cost effective solution. Keep in mind they're very industrial. If you're going for looks this might notbe the call.
March 18, 2014
Rated 5.0 out of 5.0 by LatexHer Fantastic Units!
Bought several 96" and 48" beams and end units. Used them for additional storage in the garage. A 96" unit is perfect for a cars hood or trunk to clear while allowing you to store hundreds of pounds of items in the space. Love the 48" units for our basement too. Highly recommended! You will need to have the Home Depot cut a 4X8x 3/4 inch plywood sheet in half to use as a shelf, but worth every penny! A MUST HAVE!
September 13, 2013
Rated 5.0 out of 5.0 by John Good Value. Needs support cross beams
This rack is a good value. This rack does need supports between the cross beams. It fails to mention this on the Home Depots website. On the company’s website, they do sell cross beam supports but the Home Depot doesn’t carry them. It easy enough to cut a couple of 2” x 4” for the support beams and they stiffen them up. (I don’t know, but it’s probably cheaper to use 2” x 4” than purchase the support beams anyway)
April 9, 2013