Model # OVM21NG

Internet #100595895

Emberglow Oakwood 24 in. Vent-Free Natural Gas Fireplace Logs


Oakwood 24 in. Vent-Free Natural Gas Fireplace Logs

  • Vent Free so all of the produced heat stays in your home
  • Manual control complete with ODS makes adjusting flame easy
  • No electricity required; 99.9% energy efficient
$139.00 /each

Frequently Bought Together

Product Overview

This Manual Vent Free Gas Log Set operates with the chimney flue closed, safely keeping 100% of the heat produced by the unit in your home. The manual control allows for easy adjustment of flame height and heat output. Easy to install and no outside venting required, does NOT require a working chimney or flue.

  • 99.9% heat efficiency
  • CSA certified
  • 3-year warranty on logs
  • 39,000 BTU's an hour
  • Heats up to 1,300 sq. ft.
  • Dual U-shaped burner
  • The difference between vented and vent free:

    Vented vs. Unvented Fireplaces

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Does this unit have a thermastat to control the heat?????

Asked by: Ky1934
Answered by: VicSr
Date published: 2016-12-20

If the power goes out will it still heat

Asked by: mousey
Yes. There r no electrical connections to this fireplace. Just push the gas pilot knob, light the pilot, and turn the flame selection knob on. Since this is a vent free unit, u keep the flue closed on your chimney so the heat radiates back into the room. I put a reflector plate (looks like a large cookie sheet on a stand) behind the unit so maximum heat is reflected back. This fireplace will keep a large room warm. I converted my wood burning fireplace to this gas vent free unit so that something would heat the house when the power goes out. With the wood burning fireplace I installed a power blower to blow hot air into the room but guess what ? no power, no fan. Brrr ....
Answered by: Debi
Date published: 2016-07-27

Can this be installed in my fireplace

I have an existing fireplace with the vent blocked off, Can I install these into my existing fireplace? It has a gas line to it.
Asked by: Timbo
Sure. Any "vent free" log set will work.
Answered by: Sure Heat Product Expert
Date published: 2016-03-30

do you have to light the pilot every time?

Can you just light the pilot at the beginning of the season and then turn the burner to 'on' to fire it up, or do you actually have to hold the pilot button down for 30 seconds every time that you want to turn the logs on?
Asked by: jimmy
No I leave my pilot running all winter
Answered by: Bruceinatl
Date published: 2016-05-05
  • y_2017, m_2, d_28, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_41
  • loc_, sid_100595895, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms

Customer Reviews

Oakwood 24 in. Vent-Free Natural Gas Fireplace Logs is rated 4.1 out of 5 by 192.
Rated 2 out of 5 by from Could be better Overall not bad for the price but disappointed when I opened the box and one log was broken, not packed well. After opening a "case" at a replacement log was sent by the manufacturer in a reasonable amount of time. Finally I was installing into my fireplace and noticed the brass nut holding the control to the housing was loose. I fixed that, ready for ignition and....the piezo electric igniter didn't work. I lit the pilot manually and the burner actually worked. Looks good but I'm reluctant to leave the pilot light lit considering the other issues with this set. Poor assembly, testing & inspection.
Date published: 2016-09-27
Rated 5 out of 5 by from Great little gas logs set I had these gas logs set up by a professional so I can't attest to how easy/hard it is to setup. I did follow the one reviewers comment to burn the logs on high for 2 hours and open the windows. The logs did give off a smell at that initial burning, but have not smelled since. I'd recommend doing that. The fireplace has been working like a charm. I'm happy with my purchase. Can't beat the price!
Date published: 2017-02-01
Rated 3 out of 5 by from Two issues Arrived with one log broken, proved to be very hard to get the pilot light going. I had to heat the pilot with a butane lighter to get the gas flow started. Otherwise, nice gas log fire.
Date published: 2016-10-04
Rated 3 out of 5 by from Had some issues The install for this gas log set was pretty simple but when I turned on the gas I noticed a gas smell. Upon checking I found the line going from the pressure regulator to the gas control valve was leaking. I removed the line to check for damage and found one of the ends was not made correctly and would of never stopped leaking. I remade a new line myself since the manufacturer told me it would take 4 to six weeks to get a replacement which is a joke. After installing the new line I reinstalled the gas logs and turned the gas back on. I checked it again and there were no more leaks in that area but since I was a little concerned about what I found I checked again and found a small leak on the pilot tube coming off the control valve. I was able to repair this as well but for someone that has little experience with gas appliances this could of been a major problem. I am not sure how this was able to pass inspection during assembly but the quality is defiantly lacking.
Date published: 2015-10-27
Rated 5 out of 5 by from Oakwood Vent Free NG I ordered the Oakwood Vent Free gas logs expecting very little in appearance because of the low price. We were part of the 300,000 homes that lost power in the December ice storm and I was recovering from surgery. Gas logs sounded like the ideal solution. The logs arrived quickly and wow! was I surprised. Not only do the logs provide the heat I wanted but are also attractive and actually look like real logs. What was only going to be used in an emergency has become almost a daily usage and not having to open the chimney flu is an added bonus. I recommend this product to everyone on a limited budget who wants a beautiful fire burning in their home.
Date published: 2008-01-24
Rated 1 out of 5 by from I should have listened to some of the other reviews: The packaging of this product is horrible; a... I should have listened to some of the other reviews: The packaging of this product is horrible; arrived with two broken logs and a broken control valve. So far zero telephone calls have been answered to the company (including main numbers, customer support and product support) and their online contact information is either bogus or down indefinitely; the URL cannot be found! I am VERY unhappy with this purchase and hope that HD will stand behind a return.
Date published: 2017-01-12
Rated 4 out of 5 by from The logset was easy to install and setup. The only short coming was a broken log when the set arr... The logset was easy to install and setup. The only short coming was a broken log when the set arrived. Using the accompanying instruction sheet to find the email address of the manufacturer proved challenging. After repeated attempts both online and by telephone I was able to contact the manufacturer. The phone rang for 10 minutes before being answered. Still waiting for the replacement log, going on 2 weeks now.
Date published: 2016-12-20
Rated 4 out of 5 by from Works well. looks great. The instructions are unclear about what to do with ember material. Its s... Works well. looks great. The instructions are unclear about what to do with ember material. Its still in the bag, More annoying is that the aluminum gas tube isn't long enough and it was difficult to find a flexible steel hose to replace it, The fitting should be a standard appliance size.
Date published: 2016-12-21
  • y_2017, m_2, d_27, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_192
  • loc_, sid_100595895, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms