Englander 140 CFM Small Room Air Convection Blower for Englander Pellet Stoves-PU-4C442 - The Home Depot


Model # PU-4C442

Internet # 202339046

140 CFM Small Room Air Convection Blower for Englander Pellet Stoves

Englander 140 CFM Small Room Air Convection Blower for Englander Pellet Stoves

This item has been discontinued.
The Home Depot no longer carries this specific product.

$149.00 / each


Model # PU-4C442

Internet # 202339046

The Room Air (Convection) Blower forces the warmed air from your pellet stove into your living area, keeping you and your family cozy and warm. This is the blower that causes your room air to get warmer as you increase your blower speed setting. This replacement Room Air Blower fits our 25-EP, 25-EPI and 25-PDVC models, and includes the gasket necessary for installation. Use the included step-by-step instructions, or refer to the DVD that was included with your pellet stove for a video demonstration.

  • Room air (convection) blower replaces existing blower
  • Works with Englander pellet models 25-EP, 25-EPI and 25-PDVC
  • Complete assembly with gasket included
  • Includes wire leads for fast plug and play installation


Assembled Depth (in.)  7.25 in  Assembled Height (in.)  7.375 in 
Assembled Width (in.)  6.375 in  Product Depth (in.)  7.25 
Product Height (in.)  7.375  Product Width (in.)  6.375 
Accessory Type  Air Blower  Product Weight (lb.)  4.3 lb 
Returnable  90-Day 
Warranty / Certifications
Certifications and Listings  No Certifications or Listings  Manufacturer Warranty  One year on electrical components 


Rated 3.3 out of 5 by 3 reviewers.
Rated 4 out of 5 It is quiet Same as the fan that shipped With the stove. It has return to it's old noise level. October 14, 2014
Rated 2 out of 5 by Disappointed I have a Englander 25-PDVCH pellet stove. I maintained/serviced/cleaned the unit regularly every season. This winter season one auger motor failed after a great run of 10+ years of trouble free usage on the original components. This stove is my primary heating source so a 10 year run on original parts was impressive. I decided to refurbish the stove with new parts (convection/exhaust blowers and (2)augers. Delivery was fast, packaging was good, Installation was easy. I replaced all these components in November 2013. The convection blower motor failed in December 2013. I have now ordered another convection blower replacement part. Here is hoping my $148.00 x2 investment lasts more than 40 days. December 15, 2013
Rated 4 out of 5 by Product is Factory Specs; just what I needed This fan is a factory-spec replacement for the convection blower in my Englander 25PVDC/PDC pellet stove, so it fit exactly, came with proper instructions, etc. Only problem was that it took 7 days+ to have it sent to me, after I had gone first to the local Home Depot store because the HD website told me that it was in stock. Lucky for me that the recent cold snap occurred a couple of weeks later, rather than during my wait. My advice is, if you're getting growling noises from the bearings in your pellet stove fans (there are two different ones in your Englander Pellet stoves), get them in stock at home, in advance, because the HD stores won't have themn in stock, and the factory sources can be backlogged during periods of high demand. Word to the wise... December 10, 2013
1-3 of 3


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.