Model # 25-EPI

Internet #100642932

Store SKU #1001399580

Englander 28.5 in. 2000 sq. ft. Pellet Burning Fireplace Insert
0794909252621

Englander

28.5 in. 2000 sq. ft. Pellet Burning Fireplace Insert

  • 1-touch ignition is simple and safe
  • Heats up to 2,000 sq. ft.
  • Outside air kit included
$199900 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

This beautiful Englander Pellet Burning Fireplace Insert is identical to the Evolution freestanding model, except that this model is made to fit into your masonry or pre-fabricated zero-clearance fireplace. It offers the same great features and the same super-clean burn of 1.43g per hour, making it one of the cleanest EPA-certified pellet stoves available. This stove heats up to 2,000 sq. ft. and is powered by a convenient auto-start, 1-touch ignition and a user-friendly control board. You can also connect it to a wall or remote thermostat (not included) for automatic startup and shutdown as needed. Blending function with style, the highly efficient, easy-clean firebox features an elegant, 3-panel door design with window trim, providing an attractive, wrap-around view of the fire.

  • Hopper holds approximately 45 lbs. of fuel
  • Heats up to 2,000 sq. ft. for a comfortable living space
  • Works with masonry or zero-clearance pre-fabricated fireplaces
  • Built-in 140 CFM variable speed blower system for optimal operation
  • Unit is thermostat adaptable for automatic startup and shutdown, thermostat not included
  • 3 in. pellet vent with rear exhaust fits standard pellet vent pipe
  • Super-clean burn (1.43 gram per hour) makes it one of the cleanest EPA-certified pellet stoves
  • Realistic brick fiberboard and custom-styled ceramic fiber log set create an authentic look
  • EPA and Washington state certified
  • Window trim and 40 in. W x 29-1/4 in. H, back plate is included; back plate trim kit is available separately
  • Outside air kit included (over $60 value)
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Front Product Height (in.)
20.5
Front Product Width (in.)
28.5
Product Depth (in.)
24.5
Rear Product Height (in.)
20.5
Rear Product Width (in.)
21.1875

Details

Area Heated (Sq. Ft.)
2000
Features
Adjustable feed rate,Air Wash System,Ash Drawer,Zero Clearance
Heat output (BTU/hour)
48000
Hopper capacity (lb.)
45
Included
Blower,Door,Firebox,Hopper,Log Set,Trim Kit
Product Weight (lb.)
205lb
Returnable
90-Day

Warranty / Certifications

Certifications and Listings
1-UL Listed,EPA Approved
Manufacturer Warranty
Limited Warranty: 5 years on firebox, 1 year on electrical components

More Products With These Features

Search

Customer Questions & Answers

How many BTU output

How many BTU output
Asked by: Larry
about 70. it is real trash. do not buy
Answered by: red
Date published: 2017-02-18

What is the metal stick coming out the vents in the front of the stove?

I can pull it out but I'm not quite sure what it's used for
Asked by: gn
The metal rod near the front vent is used to clean the heat exchange tubes from soot buildup, simply pull the rod out and push back in a few times as recommended and it will keep the exchange tubes clean.
Answered by: jab
Date published: 2017-01-18

does the font trime plate come with the stove

Asked by: henry
if your asking about the top and side enclosure yes it does if you mean the the gold trim that you see in some photos that is not included
Answered by: wili
Date published: 2017-06-23

Does it flame when pellets are burned

Asked by: dave
yes dave it flames great more so on higher feed rates all the benefits of a wood fireplace without the hassel
Answered by: wili
Date published: 2017-01-11
  • y_2017, m_8, d_14, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_, sid_100642932, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 118ms
  • QUESTIONS, PRODUCT

Customer Reviews

28.5 in. 2000 sq. ft. Pellet Burning Fireplace Insert is rated 3.4 out of 5 by 43.
Rated 2 out of 5 by from Meh... The stove goes through augers at a rate of about 1 every year and a half or so. The customer service doesn't get back to you for troubleshooting in a timely manner. I requested troubleshooting guidance and was told to clean the stove. I clean this thing every week to the maxx and vacuum it daily. Also tech support is only available M-F from 8am to 5pm.
Date published: 2017-03-21
Rated 1 out of 5 by from Save your money I have owned this stove for 4 years now. Every year it has multiple breakdowns. Whether it's a worn door gasket, exhaust blower motor, room blower motor,auger motor, malfunctioning control board. It's always something. Its a guaranteed break down. Problems started right from the beginning with a faulty exhaust blower and auger from the factory. I have another pellet stove from a different manufacturer for 11 years now and I never had to replace a thing on it. If you enjoy working on things instead of heating your house, this is the stove for you. Just don't count on it as a main source of heat. I wish I would have just spent my money on a better quality used pellet stove instead of this.
Date published: 2014-10-20
Rated 4 out of 5 by from Works well, but a little touchy at start up if... Works well, but a little touchy at start up if burn box is not cleaned almost every day, and blower motor is a little noisy. But heats and looks good
Date published: 2017-04-05
Rated 4 out of 5 by from The stove is economical. The only issue is the hopper.... The stove is economical. The only issue is the hopper. It does not feed the auger very well.
Date published: 2017-03-08
Rated 5 out of 5 by from First, I'd like to say I'm an experienced pellet stove owner, we purchased this unit to replace a... First, I'd like to say I'm an experienced pellet stove owner, we purchased this unit to replace a 17 yr/old Whitfield pellet stove insert. Overall we're very please with this unit after a month of use in comparison to the unit we replaced which was slightly larger in hopper capacity and convection air volume. The designs are very similar from our old stove compared to this Englander. The quality of construction of this unit is a great value in my opinion. The smaller hopper is more than adequate despite other complaints I've read in reviews. The hopper feeds pellets without issue, very typical design for a pellet stove and functions as expected. If you want to run your hopper to near empty then you may need to push pellets down (typical of pellet stoves, but not recommended). Personally I top off the hopper daily if running a constant burn, it's simple. The convection fan on this unit is scaled to the size of the stove, it's a smaller stove so it moves less air than larger units. The 2,000 sq/ft "rating" is subjective, may only apply to the most efficient rated homes. Our 1970's ranch 1,500 sq/ft house, in a moderate climate, 2 x 4 construction with limited R-value insulation rating manages to heat fine with this stove; but any bigger house or colder climate and this stove wouldn't cut it as our sole source of heat. It's noted in the manual that it's simply a space heater and not recommended for sole source heating of your home, so also keep that in mind. We use it as our primary heat source and it keeps our house cozy, we maintain about a 75 degree household. With proper installation and maintenance I'd expect this stove to last as long as our Whitfield did easily.
Date published: 2017-01-18
Rated 5 out of 5 by from excellent heat, great looks after convincing my wife we needed this stove, she was very skeptical about it, calling it a waste of money. after a few weeks of perfect operation and awesome heating she is now a believer. this stove burns great even low quality pellets. the ash pan is not that big, but apparently it doesnt have to be. after a week of use without cleaning it out there was not as much ash as i expected. i am very satisfied with this stove and the customer service from the company is the best i have experienced in years.
Date published: 2009-03-16
Rated 5 out of 5 by from GREAT PELLET STOVE Bought this Fireplace insert Pellet stove fall of 2011. What a difference in our family room and home. Stove has exceeded our expectations. Love the glass front and the view of the fire. Heats our entire basement area of about 1,500 SF so well that we have never had the stove higher than the 1-3 setting. We have a split so the heat rises up the stairway and keeps our second level very comfortable. We have already noticed a saving on our oil delivery. I have recommended this stove to family and friends.
Date published: 2011-12-27
Rated 3 out of 5 by from Decent low end stove but has some serious design issues I originally owned the freestanding Englander pellet stove with the double auger system with an extended hopper made to carry 80 pounds in my basement and decided I'd get a second stove from them as an insert to heat the upstairs since this first one worked so well. (I could burn it for 48 hours in between refills) Well now I know that was a mistake, this stove would be great if not for 2 seriously flawed design issues, both relating to the hopper. First issue is that this is a single auger stove with an auger tilted at an angle with no vertical drop before the auger (all 45 degrees) so the pellets instead of falling down on top of the auger hold and bunch up on the sides making the stove bring in less and less pellets as the hopper gets lower. Once the hopper is about 50% empty the amount of pellets feeding is noticeably smaller and as a result the flame starts sputtering out so you have to keep opening the lid and pushing the pellets towards the center or else the stove will turn off with about 30% of the pellets still in the hopper. You have to do this 3-5 times each load or else it will go out and turn off which is ridiculous. The other poor design flaw (which makes me wish I saw the stove in person instead of ordering online is that the hopper lid opening is TINY. Compared to the freestanding stove the lid is maybe 25% as deep so when you are filling the hopper with a bag you have to keep putting your hand in there and pushing the pellets towards the back of the stove to make room for the rest. And the hopper does not hold 40 pounds like it says you will never get more then 4/5ths of a 40 pound bag in there and if you are filling it when the stove is hot and having to stop rest the bag on the hot stove while you push the rest of the pellets toward the back of the hopper so you can pour more in as the bag starts giving off wonderful melting smells. Anyways, aside from those two boneheaded design flaws the stove seems to work well.... it annoying that I will have to always be around to make sure the pellets are feeding (and just to note, I have already done the recommended cleaning the hopper, polishing and adding graphite lubricant to make the pellets slide but the sliding issue has nothing to do with the materials surface on the side it has to do with the auger pulling pellets from the sides and having no vertical shaft to drop the pellets on top of the auger. I am almost tempted to pull the stove out and redesign the hopper with sheet metal to make it work properly now. BTW, if any representatives of this company read this. Your hopper lid should stick out to the front of the stove and slope in. There is no reason to have it so small. The extra money for an insert should be more then the same stove with less metal and no pedestal with a reduced hopper lid. DESIGN a real insert please not a chopped up freestanding stove for more money. I'd only recommend this stove if those two issues were fixed. If not this stove is a pain and only worth it if you plan on watching it like a hawk and flipping open that lid and shuffling pellets with your hand every 2-3 hours. Certainly not to be trusted to still be running if you leave the house for more than a few hours.
Date published: 2013-10-01
  • y_2017, m_8, d_14, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_43
  • loc_, sid_100642932, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 115ms
  • REVIEWS, PRODUCT