Estwing 17 in. Pro-Claw Contractor Bar-RSC - The Home Depot


Model # RSC

Internet # 100351731

Store SKU # 100228

17 in. Pro-Claw Contractor Bar

Estwing 17 in. Pro-Claw Contractor Bar

This item has been discontinued.
The Home Depot no longer carries this specific product.

$22.97 / each


Model # RSC

Internet # 100351731

Store SKU # 100228

This bar is truly a unique patented contractor bar. This Estwing 17 in. roofing, siding, contractor bar is drop forged from fine tool steel. One end has a thin blade with a 2 1/2 in. fulcrum giving it a higher lift than other bars. This 3 in 1 bar is perfect for removing shingles, sheeting and siding along with downspouts and gutters. The other end has a Japanese pattern nail puller with rounded head to improve leverage. It also removes imbedded nails with ease. Protect your eyes from flying particles and dust. Always wear safety goggles. Bystanders shall also wear safety goggles.

California residents: seeProposition 65 information

  • Thin blade makes it easier to get under shingles, siding and framing
  • Drop-forged from fine tool steel
  • Highly polished surfaces and durable black finish
  • Rounded head on nail puller improves leverage
  • 2 nail slots


Assembled Depth (in.)  1.5 in  Assembled Height (in.)  16.5 in 
Assembled Width (in.)  2.5 in  Bar length (in.)  16 
Hand Tool Type  Pry Bar  Individual/Set  Individual 
Number of Pieces  Number of nail slots 
Returnable  90-Day  Tools Product Type  Hand Tool 
Warranty / Certifications
Manufacturer Warranty  Lifetime against manufacturers defect 


Rated 4.9 out of 5 by 9 reviewers.
Rated 5.0 out of 5.0 by Excellent nail puller and board separator The pointed claw on this bar is unique. I do a lot of demolition of wood structures; this is my favorite tool for removal of difficult nails. With this tool and a hammer I can remove pretty much any nail, even embedded nails. I use the flat end less, but do find it useful for creating separation between tightly nailed boards November 30, 2014
Rated 5.0 out of 5.0 by Great for scraping up floor tile from a slab I had to remove the vinyl asbestos floor tile before having carpet installed because the tile was beginning to loosen and pop when I stepped on it. This tool worked amazingly well, but I discovered I could use a garden spade with the blade upside down for most of the floor. This tool, however, was very useful for removing those tiles that were securely anchored to the floor. August 5, 2014
Rated 5.0 out of 5.0 by It lives up to it's name The bar is very well made, feel and balance are excellent, as is the finish. August 12, 2014
Rated 5.0 out of 5.0 by Very Useful for Prying I used it yesterday to remove two 2-inch thick, 4-inch wide, 8-ft long lumbers nailed to a wall. The lumbers were part of a pergola. The blade was thin enough to get under the lumbers. Unlike other pry bars, the nail-pulling end is tapered and thus can be used as a handle. The bar is short enough to work in restricted spaces but long enough to provide sufficient leverage. It took me a while to come up with a plan and find a tool to remove the lumbers, but only 15 minutes to actually remove them. This tool helped me accomplish what I bought it for. January 4, 2014
Rated 5.0 out of 5.0 by nice design pros, made in usa. lots of bend to get a good pry. nice cats paw. nice slim pry end to get in tight spots. Quality product. cons, none January 14, 2014
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.