Model # SP03302VD

Internet #204478345

Store SKU #1000026686

Everbilt 1/3 HP Submersible Sump Pump

Everbilt

1/3 HP Submersible Sump Pump

$159.00 /each

Frequently Bought Together

Product Overview

The Everbilt 1/3 HP stainless steel/cast-iron submersible sump pump is ideal for use in rugged applications. The oil-filled, high-efficiency PSC motor is equipped with durable ball bearings and automatic thermal protection. An innovative reed sensor vertical float switch provides performance reliability.

  • Stainless steel motor housing, rugged cast-iron volute and seal plate maximizes pump life
  • Innovative reed sensor vertical float switch provides performance reliability
  • Permanent lubricated ball bearings for quiet performance, free of maintenance
  • Top suction design filters debris and minimizes clogging
  • For Professional Technical Support call 1-844-241-5521

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Pressure Relief hole

The Installation instructions do not require a relief hole drilled into the discharge pipe before the Backflow valve. Most other Pumps I have used insist on one. Does this pump not need one, or is this missing from the Instructions.
Asked by: Camdids
Good question, I wondered the same thing. Mine is installed and working OK for >1 month, without the relief hole per the instructions. Discharge time is ~5 seconds, ~30% shorter than the previous two 1/3 hp pumps WITH relief holes, in same system. Maybe this shorter run time will save electricity,? So far, so good.
Answered by: Pug
Date published: 2015-11-04

At what depth of water does the pump switch on?

At what depth of water does the pump switch on?
Asked by: Joe
Since it is rather cold here, my sump pump is not running. I 'manually' raised the float to trigger it on mine, and let it run to auto stop. The off level leaves about 3" of water in the pit, and I'd estimate the on water depth would be about 8-10". Mine runs about 20 seconds when cycling in a heavy rainstorm. Cycling frequency depends on the rain fall. They recommend mounting on brick/blocks to elevate off the bottom an inch or two...basically to prevent rocks from getting into the impeller blades.
Answered by: MrMike
Date published: 2017-01-15

How or where do I register a new pump for my 3 year warranty?

How or where do I register a new pump for my 3 year warranty?
Asked by: Ence
I don't know, my manual is not available now. Did you check the manufactures web page? Perhaps it has more details. Their web page / address should be in the manual. Generality they need model & serial numbers, proof of purchase.
Answered by: MrMike
Date published: 2017-02-17

Can I add a separate switch with for longer run time and less frequency?

I would like to bypass the float switch on the pump and use a separate float switch so the pump does not run as often. Right now it runs for 6 sec and depending on how hard it is raining it cycles quite often. I can fix the pump switch in the on position to add a separate float switch.
Asked by: JAD
You don't need to "bypass" or "fix it on" at all. Just plug the 2nd float in series with the pump's power cord. The switch with the higher limit will control the activation. Like this: 120VAC wall outlet - 2nd float switch - sump power cord (within in it is a switch then the motor). If you use one of the tethered type, make sure it can't get stuck on the wall of the pit or anything else or your basement can flood.
Answered by: MrMike
Date published: 2016-10-22
  • y_2017, m_2, d_19, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_, sid_204478345, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 128ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/3 HP Submersible Sump Pump is rated 3.9 out of 5 by 47.
Rated 1 out of 5 by from I purchased & installed this pump in late 2015 (Sep/Oct), a replacement for one I bought at HD on... I purchased & installed this pump in late 2015 (Sep/Oct), a replacement for one I bought at HD only 2 years earlier that suffered TWO failed float switches and burned up. The float switch on this pump became unreliable in less than 1 year; and it has now failed completely about a year after purchase. I am sick to death of the extremely poor quality sump pumps that HD sells at a premium price! I have a cheap plastic pump I bought 8 years ago on Ebay that is still going strong in the rear pit. If I'm going to have to replace the front pump once or twice a year, I may as well just buy the cheapest one I can find - but NOT at Home Depot!
Date published: 2016-11-16
Rated 2 out of 5 by from This sump pump is not worth what you pay for it. Understand..it does the job, but very LOUDLY!!!!... This sump pump is not worth what you pay for it. Understand..it does the job, but very LOUDLY!!!! My husband and I could hear it from the second floor. We ended up returning it and now have learned to do research before buying an inexpensive sump pump. We switched it for a Zoeller model. It's very quiet and now we can sleep at night without the loud noise.
Date published: 2017-01-17
Rated 4 out of 5 by from Easy replacment for a failed pump (the switch) These pumps are generally good for about 5 years in my application. Look at the warranty on the box; is it 1, 2, 3, years... Your mileage may vary. Depends on content of ground water and how often and how long it operates. The usual 'failure mode' is the switch in my case. It either fails to activate the motor or deactivate it when the sump pit is empty. Just wish the switch was available and easily replaceable. This unit uses a float (probably with a magnet in it) that activates the electronic 'switch'. My local HD had the replacement switches in stock for this unit. I'm not sure yet if that is a good or bad thing. Time will tell. I also replaced the check valve and 4 clamps (about $10), the screws rust (the stainless parts are fine). This is the easy disconnect part; all the original PVC stays in place and was reused. ps - don't forget to drill a small hole (1/8") in the discharge line an inch or two up from the pump outlet. The motor is easier to start without the head pressure of the standing water in discharge line.
Date published: 2016-09-06
Rated 1 out of 5 by from Go to a plumbing supply house and buy a real pump The pump I bought failed after 8 hours of intermittent use, causing my basement to flood again. Customer service at Everbuilt is just as bad. Went to a local plumbing supply house and bought a zoller sump pump.
Date published: 2017-01-31
Rated 2 out of 5 by from Pumps fine, but too LOUD. Jolts on, and hammers off - will jolt you out of a deep sleep. Went bac... Pumps fine, but too LOUD. Jolts on, and hammers off - will jolt you out of a deep sleep. Went back and got the cheaper 3/10 HP Everbilt... quieter and so far so good.
Date published: 2017-01-27
Rated 3 out of 5 by from Noisy... Noisy
Date published: 2017-01-17
Rated 1 out of 5 by from I spent the extra money for a "better" pump but it failed in 7 months and I do not get a lot of w... I spent the extra money for a "better" pump but it failed in 7 months and I do not get a lot of water in my sump. Of course it was 1:30 in the morning when I heard my watch dog water alarm go off and I went down and the water was over the pipe. While my wife started to bail water and Home Depot was not open I had to go to Meijer and purchase a $200 pump due to the lack of options. Everbilt said I have to call them when I'm home with the sump pump and I may have to remove bottom of the pump and run a test for them before they will authorize a repair or replacement pump. Even with showing them I had to purchase a new pump in the middle of the night they will only repair or replace the pump. So basically if your pump fails you will have to buy a new one or hope it does not rain for awhile. I guess I have a back up pump now but for $150 I would expect it last much longer.
Date published: 2016-12-01
Rated 5 out of 5 by from the system was already in place when the pump went out. rubber sleeves were used to make things e... the system was already in place when the pump went out. rubber sleeves were used to make things easier....because things do break... the pump makes very little noise and fast.....so far so good.....bought one plastic part extra....$2.......gravy fix
Date published: 2016-10-27
  • y_2017, m_2, d_19, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_47
  • loc_, sid_204478345, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 70ms
  • REVIEWS, PRODUCT