0887480041712

Everbilt

Model # 804171

Internet # 204274695

Store SKU # 514963

1/4 in.-20 tpi x 1-1/2 in. Coarse Zinc-Plated Steel Flat-Head Phillips Machine Screw (4-Pack)

$1.18 /each

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # 804171

Internet # 204274695

Store SKU # 514963

These machine screws are used with nuts or directly into a female threaded receptacle to fasten metal parts together. They are installed into an existing or predrilled, pre-tapped hole and are fully threaded. Measurements are made from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed, use with nuts of the same material, finish, and threading for proper fit.

California residents: see  Proposition 65 information

  • 4-piece per pack
  • Steel construction
  • Zinc-plated
  • 1/4 in.-20 tpi x 1-1/2 in.
  • Flat head Phillips drive
  • Note: Product may vary by store

SPECIFICATIONS

Dimensions
Assembled Depth (in.) 
0.48 in 
Assembled Height (in.) 
1.50 in 
Assembled Width (in.) 
0.62 in 
Fastener length (in.) 
1.5 
Head diameter (in.) 
0.477 
Screw Length 
1-1/2 in 
Details
Coated 
Drive Style 
Phillips 
Driver bit included 
No 
Fastener Callout Size 
1/4"-20 x 1-1/2" 
Fastener Head Style 
Flat 
Fastener Plating 
Zinc 
Fastener Thread Type 
Coarse 
Fastener Type 
Machine Screw 
Fastener/Connector Material 
Steel 
Finish 
Zinc 
Finish Family 
Metallic 
Head Style 
Flat 
Indoor/Outdoor 
Indoor/Outdoor 
Measurement Standard 
SAE 
Package Quantity 
Primary Use 
General 
Product Weight (lb.) 
0.12 lb 
Returnable 
90-Day 
Self drilling 
No 
Self tapping 
No 
Size 
1/4 in 
Tamper Resistant 
No 
Warranty / Certifications
Manufacturer Warranty 
None 

MORE PRODUCTS WITH THESE FEATURES

Size: 1/4 in
Screw Length: 1-1/2 in
Fastener Thread Type: Coarse
Drive Style: Phillips
Head Style: Flat
Fastener/Connector Material: Steel
Measurement Standard: SAE
Search
1 Question1 Answer

Customer Questions & Answers

1/4 in.-20 tpi x 1-1/2 in. Coarse Zinc-Plated Steel Flat-Head Phillips Machine Screw (4-Pack)
1/4 in.-20 tpi x 1-1/2 in. Coarse Zinc-Plated Steel Flat-Head Phillips Machine Screw (4-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
1 answer

Fit wall plate outlets?

This question is from 1/4 in.-20 tpi x 1-1/2 in. Coarse Zinc-Plated Steel Flat-Head Phillips Machine Screw (4-Pack)
Asked by
Baltimore, MD
Read all my Q&A
October 11, 2015
I need longer screws to extend my wall plate. Will these work?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Atlanta, GA
Read all my Q&A
Home Improvement Profile: Professional
October 13, 2015
Answer: 
Hi Mike,
1/4''-20 threads per inch (TPI) is too large for switch plates.
You will need to pick up some #6-32tpi machine screws that are 1'' long. The screws that come with the plates are 1/2'' long.
Copy and paste this address for the longer screws:
http://www.homedepot.com/p/Crown-Bolt-6-32-x-1-in-Fine-Zinc-Plated-Steel-Oval-Head-Slotted-Wall-Plate-Screws-25-Pack-29044/202737926
Thank you for Read More
Hi Mike,
1/4''-20 threads per inch (TPI) is too large for switch plates.
You will need to pick up some #6-32tpi machine screws that are 1'' long. The screws that come with the plates are 1/2'' long.
Copy and paste this address for the longer screws:
http://www.homedepot.com/p/Crown-Bolt-6-32-x-1-in-Fine-Zinc-Plated-Steel-Oval-Head-Slotted-Wall-Plate-Screws-25-Pack-29044/202737926
Thank you for asking,
-Travis Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-06-25 T14:38:03.908-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204274695, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;