Model # 802301

Internet #204274194

Store SKU #154243

Everbilt 1/4 in. -20 tpi x 5/16 in. Zinc-Plated Tee Nut (4 per Pack)
0887480023015

Everbilt

1/4 in. -20 tpi x 5/16 in. Zinc-Plated Tee Nut (4 per Pack)

$1.18 /each

Frequently Bought Together

Product Overview

These tee nuts are barrel shaped fasteners with internal threading and are used when a flush surface is needed. The tee nut has a flat base with prong projections running parallel to the barrel. The four prong nuts can be used in hard or soft wood as well as plastic or particle board. When installed, the tee nut sits flush with the fastened material.

California residents: see   Proposition 65 information

  • 4-per pack
  • Steel construction
  • Zinc-plated
  • 1/4 in. -20 tpi x 5/16 in.
  • Coarse thread
  • 1/4 in. -20 tpi x 5/16 in. tee nut zinc-plated
  • Note: Product may vary by store

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions3 Answers

Customer Questions & Answers

1/4 in. -20 tpi x 5/16 in. Zinc-Plated Tee Nut (4 per Pack)
1/4 in. -20 tpi x 5/16 in. Zinc-Plated Tee Nut (4 per Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

What size diameter bolt goes into this nut? Is it 1/4 1n or 5/16?

This question is from 1/4 in. -20 tpi x 5/16 in. Zinc-Plated Tee Nut (4 per Pack)
Asked by
reseda cal
Read all my Q&A
June 21, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
York, PA
Read all my Q&A
Home Improvement Profile: DIYer
February 9, 2016
Answer: 
The bolt to use is 1/4 in - 20 TPI
The Tee Nut outside diameter is 5/16". This is the size hole to drill for the nut.
The nut is designed to be hammered into the wood to set the prongs.
I have found that you do not want to hammer too much, or risk bending the prongs. Once the prongs have a good grip, tightening the bolt will secure the nut in place.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

June 22, 2015
Answer: 
This product uses a 1/4" bolt.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
 
1 answer

long neck zinc plated tee nuts

This question is from 1/4 in. -20 tpi x 5/16 in. Zinc-Plated Tee Nut (4 per Pack)
Asked by
st.louis, missouri
Read all my Q&A
August 15, 2015
zinc plated tee nuts with long neck
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 17, 2015
Answer: 
We do not currently offer long neck tee nuts.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-30 T23:40:16.913-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204274194, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.0 out of 5 by 1 reviewer.
Rated 4.0 out of 5.0 by Pretty good bolt I have used these bolts often. Be sure that the "teeth" are set before you start tightening - i sometimes hammer them in while I have the bolt hand tight. Otherwise the teeth may not grab and you will spin the unit thus flattening the teeth, which renders it almost useless - especially true if you are using a drill driver to tighten the bolt. The zinc coated finish gives some protection from the elements; however if you want that "bling" look, get the special order, gold plated version - really makes the project pop! October 13, 2014
  • 2016-10-30 T21:56:32.415-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_204274194, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT