The Everbilt Braided Stainless Steel Ice Maker Supply Line comes with all the necessary components to install your ice maker to the water supply. The hose features a PVC core and a stainless steel braided exterior that is designed to prevent kinking and crimping. Brass compression fittings ensure a solid connection. The durable and flexible supply line is resistant to corrosion and is easy to install.
Highlights
Stainless steel braiding over braided PVC for strength
Use to hook up your icemaker to the water supply
Brass 1/4 in. compression fittings on both ends
Features certified lead-free construction
Bends freely, without kinking or crimping, installation is easier, especially in cramped quarters
Internal corrosion resistance to harsh water conditions
This product is safe and to supply water to Icemakers/water dispensing refrigerators
Q:Why does my water taste like metal? I just hooked up water line and installed water filter
by|Nov 21, 2023
0 Answer
Answer This Question
Q:Does it fit a Whirlpool refrigerator freezer?
by|Sep 18, 2023
1 Answer
Answer This Question
A: It's not specific to manufacturers. You just have to verify the refrigerator requires a 1/4 connection, most do.
by|Nov 11, 2023
Q:Have two hoses attached to filter. I want to remove filter and use new filter in fridge. Is there a hex nipple or other connector to connect the two lines.
by|Jun 30, 2023
1 Answer
Answer This Question
A: Hello Robert,
We would not recommend connecting two separate lines together.
by|Jul 6, 2023
Q:What kind of fitting do I need to join two of these same lines together?
by|Jun 13, 2023
1 Answer
Answer This Question
A: Hello Dave- Please send us a message to info@hwcares.com for further assistance.
by|Jun 16, 2023
Showing 1-4 of 58
Customer Reviews
4.8 out of 5
4.8 out of 608 reviews
73% recommend this product
5
520
4
55
3
9
2
2
1
22
Filter by:
Showing 1-10 of 608 reviews
May 29, 2021
Caution!!
These hoses are made in China, as are most stainless braided hoses. That doesn't automatically make them inferior, but quality control and reliability can be an issue. For the time being, I highly recommend you buy another brand for your 1/4" stainless braided hose. I bought two of the 10' Everbilt icemaker hoses and both had several minor kinks along the length which could lead to trouble down the road. It appears the current batch (May 2021) in the stores are inferior. My refrigerator and freezer connections are in the front, which is a nice feature, but there is not a lot of room (clearance height) for positioning the hose. As a tip, tape the hose to the floor, and you can even tie a nylon sting to the hose fitting to keep it in position when sliding the refrigerator / freezer into position. With these particular hoses, the braiding was very brittle and pieces of stainless flaked off during roll back due to slight friction. Braided hoses should be well built and easily last 10 years. Kinks and flaking should not be happening out of the box. These Everbilt hoses will be keeping me up at night until I decide to pull the refrigerator next week and replace them with something better (ugh). In the photos, I abandoned the water supply valve behind the units and added an accessible valve in the basement; that's why the hoses are routed through the floor.
1/4 is usually the standard size to connect your refrigerator to the water aource. The 5’ length is perfect for you to be able to pull out your refrigerator and connect the line and have sufficient space to work
Did exactly what its supposed to, I'm a lisensed plumber...
Did exactly what its supposed to, I'm a lisensed plumber and normally install hydro pro but this was cheaper. It's great make sure to snug with channel locks while making connections on install.
1/4 in. COMP x 1/4 in. COMP x 120 in. BurstProtect Stainless Steel Ice Maker Supply Line
by has a patented pending connector to protect against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. It automatically shuts off the water supply to plumbing fixtures/appliances if excess water flow is sensed, and will remain in the closed position until it is reset. The shutoff valve is located on the inlet end of the supply line, and there are no mechanical moving parts which mean no power required for installation.
3/8 in. COMP x 3/8 in. COMP x 96 in. Universal Stainless Steel Dishwasher Connector
The Everbilt Universal Dishwasher Installation Kit comes with all the necessary components to connect your new dishwasher to the water supply. The braided stainless-steel exterior is designed to prevent kinking and crimping and resist corrosion. It consists of white flexible PVC Tubing jacketed with braided Stainless-steel wire, permanently attached brass compression end fittings and additional elbows.
3/4 in. FHT x 3/4 in. FHT x 72 in. Braided Stainless Steam Dryer Installation Kit
The Everbilt Braided Stainless Steam Dryer Installation Kit comes with all the necessary components to install your new steam dryer to the water supply. The hose features a PVC core, braided polyester reinforcement, an additional layer of PVC and a stainless-steel braided exterior that is designed to prevent kinking and crimping. Brass nuts on both ends of the connector ensure a solid connection. The durable and flexible supply line resists corrosion and is easy to install.
3/8 in. COMP x 3/8 in. COMP x 60 in. Universal Stainless Steel Dishwasher Connector
Everbilt universal dishwasher installation kit includes everything needed to connect your dishwasher. The connectors are corrosion resistant inside and out. Used to connect the water supply to your dishwasher, this appliance connector features stainless steel for resistance and durability. Braided stainless steel is designed to bend freely without kinking or crimping.