Everbilt

Model DP550C

Internet #204480030

1 HP Convertible Jet Pump

$184.99 /each

Frequently Bought Together

Product Overview

The Everbilt 1 HP cast iron convertible jet pump has superior performance at depths to water to 70 ft. or less. Self-priming after pump housing is initially filled. Built in pressure switch 30/50 psi for automatic operation. The ejector kit and pressure.

  • Rugged cast iron construction
  • Shallow well application water level: 25 ft.
  • Deep well application water level: 70 ft.
  • Heavy-duty dual-voltage 115/230-Volt motor, pre-set at 230-Volt
  • Self-priming after pump housing is initially filled

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions11 Answers

Customer Questions & Answers

1 HP Convertible Jet Pump
1 HP Convertible Jet Pump

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 1 HP Convertible Jet Pump
 
6 answers

WHAT SIZE ARE THE INLET AND OUTLET PIPE CONNECTIONS?

This question is from 1 HP Convertible Jet Pump
Asked by
JULIAN, CA
Read all my Q&A
August 9, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
colver PA
Read all my Q&A
Home Improvement Profile: DIYer
June 9, 2015
Answer: 
They are 1" and 1 1/4" pipe fittings
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
colver PA
Read all my Q&A
June 9, 2015
Answer: 
1" and 1 1/2"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Albany, OR
Read all my Q&A
February 11, 2015
Answer: 
1 1/4" and 1" on the face. 1" on the top discharge, but the plastic pressure regulator that comes with the pump and goes in the discharge has a 3/4" hole on its discharge.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Paramus, NJ
Read all my Q&A
Home Improvement Profile: Professional
August 25, 2014
Answer: 
There are 2 inlet holes. The reason for the 2 holes is if you are setting it up for a shallow well (Up to 25 feet) then you only use the 1 1/4 hole. If you are setting it up for a deep well, Up to 70 feet then you use both holes, the other one being one inch,This is standard set up for jet pumps. The outlet hole is one inch.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

August 15, 2014
Answer: 
1 1/4 and 1 in adapters and same size for pvc pipe. 1 in tank tee.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
NW Montana
Read all my Q&A
Home Improvement Profile: DIYer
August 12, 2014
Answer: 
they are 1 1/4" diameter pipe thread.
-1point
1out of 3found this answer helpful.
Was this helpful?helpful1unhelpful2
This question is from 1 HP Convertible Jet Pump
 
3 answers

can i see installation manual

This question is from 1 HP Convertible Jet Pump
Asked by
Read all my Q&A
August 2, 2014
Need to see full system reqmts.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
El paso tx
Read all my Q&A
October 6, 2015
Answer: 
apparently not without searching for it with the manufacturer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 31, 2015
Answer: 
couldn't find where to download it on the home depot web site
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

August 8, 2014
Answer: 
There is a PDF available at Home Depot's website.
-6points
1out of 8found this answer helpful.
Was this helpful?helpful1unhelpful7
This question is from 1 HP Convertible Jet Pump
 
2 answers

can this be installed vertically as opposed to horizontally?

This question is from 1 HP Convertible Jet Pump
Asked by
boulder, co
Read all my Q&A
November 1, 2014
I have a 2x2 casement that leads to my well. I'd like to put a pump in there, situated vertically. Is this possible with the everbilt?

Thanks/.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
colver PA
Read all my Q&A
Home Improvement Profile: DIYer
June 9, 2015
Answer: 
No it has to be horizontal.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 12, 2014
Answer: 
No, this pump can only be mounted horizontally as shown in the picture.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 1 HP Convertible Jet Pump
 
0 answers

can i use a 2 inch well and tee off to 1 inch then hook up to both inlet hole and use as a deep well

This question is from 1 HP Convertible Jet Pump
Asked by
Read all my Q&A
June 8, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-08-31 T13:14:25.058-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204480030, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 19 reviewers.
Rated 1.0 out of 5.0 by DO NOT BUY DO NOT BUY! LASTED ONLY 1 YEAR. MOTOR BURNED OUT. JUNK JUNK JUNK!! June 27, 2016
Rated 4.0 out of 5.0 by Good quality pump The well pump is very sturdy, much better than the County Line 1 hp pump from Tractor Supply it replaced. Everything about the install was as expected. It took a little effort to prime it, but as soon as it started pulling water it has run like a champ. My only complaint, and I totally admit it was my ignorance that caused the problem, is that I need a shallow well pump. This pump easily converts to a shallow well pump AFTER you add the FP4875 Shallow Well Jet Kit to it. This is NOT included with the pump and Home Depot does NOT carry this product. I found it on Amazon for $55, but of course that left me without water for several more days. June 19, 2015
Rated 1.0 out of 5.0 by only half the pump The rest of the pump is out of stock. the shallow well ejector is not available with Home Depot. So I guess I will return it or go on a search for the rest of it. . October 6, 2015
Rated 1.0 out of 5.0 by I would give it a 0 if I could Bought this pump to replace another 1hp shallow well pump that went bad. Got the conversation kit for shallow well and followed instructions to the t. First time it leaked right where the conversion kit connected. Not a little... ALOT! And it also leaked at the base of the t outlet. All fittings were Teflon taped and securely fastened. Took both products back to HD and the promptly swapped them for 2 new ones. Got home, re plumed , Primed and guess what ? Yep, Same 2 problems! I am so upset, no water for 2 days and this has just added to it. Steer clear of this piece of junk and spend the money on a decent one! March 20, 2015
Rated 4.0 out of 5.0 by Works Well with the Well Living in the country, we have no option for "city" water service. We rely on keeping our own well maintained and our water system operational. A few years back we opted to duplicate the operating system of our well to ensure that down time of pumps/switches at the well was minimal. I am using this pump as a backup, plumed in the system, to our existing pump. This does a good job. Quiet & self-priming after the initial prime (which I found easy to do). Works with 110/240V electrical systems. Built in pressure switch and pressure gauge allows for visual confirmation it is operating under expectations. August 5, 2014
Rated 4.0 out of 5.0 by Great pump. One drawback. The drawback is that the holes are too close together for PVC fittings. One of the holes has to be extended with metal pipe. Then you can continue with PVC. The fewer connections the better and this creates an extra connection. That being said, It is a great pump. Bought this as a replacement pump for a forty foot well. Primed right up as per instructions. Much better pressure at the faucet than the old Sears pump. Quieter too. I recently replaced a pump on a 25' well. For that I used the Wayne 3/4 hp shallow well jet pump. Very happy with it. February 11, 2015
Rated 1.0 out of 5.0 by Leaky fitting at front of pump housing. I had the same problems as DJ1969. No matter how tight I made the 1 1/4 inch pipe at the plastic housing it leaked. Pump will be going back to Home Depot. It's time to find a pump with the good old Made In The USA. May 24, 2015
Rated 1.0 out of 5.0 by leaking fittings This is the second pump that has leaking fittings on the pump. The second one won't even build pressure the leak is so bad. It is going back tomorrow for a full refund. June 9, 2015
  • 2016-08-31 T12:52:40.945-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_19, tr_19
  • loc_en_US, sid_204480030, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms
  • REVIEWS, PRODUCT