Model # 49908

Internet #203661113

Store SKU #141178

Everbilt 1 in. Threaded Stem Furniture Glides with Felt Base (4 per Pack)


1 in. Threaded Stem Furniture Glides with Felt Base (4 per Pack)

$3.97 /each

Frequently Bought Together

Product Overview

1 in. Felt guard plus Round Felt Threaded Stem Glides (4 per Pack) is designed for use with displays, office equipment and household furniture with threaded sockets. Their felt bottoms reduce friction and noise, and they prevent marring and scratching of hardwood and laminate floors. They attach easily with 1/4 in. x 20 x 1 in. threaded stems.

  • Ideal for use on displays, office equipment and furniture with threaded sockets
  • Felt bottom and metal threaded stem
  • 75 lb. load rating
  • Felt reduces friction and noise
  • Helps level furniture on uneven wood, ceramic and tile floors
  • Prevents marring and scratching of hardwood and laminate floors
  • Installs easily with 1/4 in. x 20 x 1 in. threaded stem




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can the guides be removed from the screws if not needed. These are replacements?

Asked by: Marsbar3
Hi Marsbar3 yes the guides scan be removed. They screw off.
Answered by: KA8HD
Date published: 2016-08-18

what is the size of the threads? 1/4" ? the pad needs to be approximately 1 1/8" +or- round.I also need legs for a washer and dryer with 3/8" threads

I need 1/4" threaded / padded legs for bar stools, and 3/8" threaded legs for a washer and dryer with metal pads that have a nut to adjust them for height/depth.
Asked by: Ronald
The bolt is a standard 1/4-inch diameter bolt with one-inch insertion depth. I did not measure it with calipers, but it is most likely a 1/4-20 thread. The pad is a standard 1-inch. There were also a 1-1/2 inch diameter version in the store, and a 1-1/16 inch version appears to be listed for online purchases. For your washer, you might want to look more for legs with a full metal bottom instead of a felt pad on plastic. Vibrations from the washer would likely break the plastic and/or ruin the felt. Also, your washer probably has threads, so you don't need an included threaded insert. You can find 3/8-inch posts just searching for leveling feet or threaded glides.
Answered by: HinOH
Date published: 2015-11-07

What size drill bit do you use to insert the plastic fitting?

Asked by: Joe
  • y_2017, m_4, d_24, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_203661113, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms

Customer Reviews

1 in. Threaded Stem Furniture Glides with Felt Base (4 per Pack) is rated 3.5 out of 5 by 4.
Rated 5 out of 5 by from Worked as expected I bought these feet because I built a monitor stand and just couldn't get the correct feet to set the level. These feet were exactly what I needed to be able to adjust the height. I used a 3/8" drill, not the 11/32" they recommend. The reason for this is the wood I used is 3/4" MDF and it splits if you put so much as a finishing nail in the side. With the 3/8" hole it allows the insert to bite into the wood with just enough force to allow the feet to turn without the insert turning. Even with the 3/8" hole I still had to tap them in with a hammer. I added a little Duck Tape to the bottom of the feet, to give them a little grip, so the stand wouldn't go flying off my desk. All in all they are great for light duty work.
Date published: 2016-09-01
Rated 4 out of 5 by from Better than the self adhesive Have new hardwood floor, heavy stools with hard plastic bottoms, would surely damage the floor, drilled 11/32 hole in the bottom of each leg, inserted the sleeve (fit snugly) screwed in the felt covered slide easily, no problem. Had tried the self adhesive Everbillt felt, didn't work so well, slid off right away. The first reviewer must of had damaged inserts, mine work just fine. Bonus they can be adjusted if necessary if floor is uneven. Not sure of durability yet, just put them on.
Date published: 2013-11-24
Rated 4 out of 5 by from Does its job nicely Not sure of durability and would prefer a metal threaded barrel insert instead of plastic for a weight bearing part. This is what was available for a quick project that will stand on a wood floor, so felt pads are preferred. That said, here is what I did with a pine cabinet that is relatively soft wood. It was not necessary to buy an 11/32-inch drill bit, which as noted is a rare size for most kits. An 11/32-inch diameter is not required for the entire 1-inch depth of the screw, just for about 3/8" depth at most for the threaded barrel. First, I used a 5/32-inch Forstner tipped auger bit for a straight pilot hole. Then it was more than enough to drill with a 5/16" bit to full depth and just jog it around a little to widen the open end of the hole. The barrel centered and mounted flat, and there is enough room in the shaft for a 1/4-inch diameter bolt even if the hole is not perfectly straight. The bolt turns easily in the barrel all the way to full insertion depth without any binding.
Date published: 2014-12-23
Rated 1 out of 5 by from Don't Waste Your Money On This Product I followed the directions exactly. Drilled 11/32 hole 1 inch deep, tapped glide socket in. However, when you try to thread the glide into the socket, the threaded portion attached to the felt base strips in the plastic, and you can not thread the glide into the socket.
Date published: 2013-08-31
  • y_2017, m_4, d_23, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_203661113, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 78ms