Model # HD-0495-CH

Internet #205561156

Store SKU #866365

Store SO SKU #1001004232

Everbilt 12.4 in. x 1.05 in. Chrome Shelf and Rod Bracket
0029274355128

Everbilt

12.4 in. x 1.05 in. Chrome Shelf and Rod Bracket

$7.96 /each
Color/Finish: Chrome
  • Bronze
  • Brushed Nickel
  • Chrome
  • White

Frequently Bought Together

Product Overview

The Everbilt 11-1/4 in. Heavy-Duty Shelf and Rod Bracket supports up to 1000 lbs. per pair when properly installed in wall studs. The rod hook features unique slid-through technology that snaps poles into place and allows hangers to move along the pole without getting caught. It is also features an attractive chrome finish.

  • Able to support up to 1,000 lbs. per pair when properly installed in wall studs
  • Supports shelves 11 in. - 15 in. deep
  • Snap-in hook works with 1-1/4 in. and 1-5/16 in. poles
  • Durable chrome-plated finish
  • Slide-through feature helps traditional-sized hangers move without getting caught

Specifications

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions9 Answers

Customer Questions & Answers

12.4 in. x 1.05 in. Chrome Shelf and Rod Bracket
12.4 in. x 1.05 in. Chrome Shelf and Rod Bracket

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

screw size -- kind

This question is from 11.25 in. x 1.05 in. Brushed Nickel Shelf and Rod Bracket
Asked by
Parkland, Florida
Read all my Q&A
September 9, 2016
what size screw do I use to mount into drywall... or what kind of screw
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 12, 2016
Answer: 
The model # for the screws to install this bracket is HD-0047-CH or search for Internet # 205561130 on homedepot.com. They are 1-1/2 in. & 5/8 in. screws.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

I want to use these brackets to hang a U shaped clothing rod from my basement ceiling. What bracket spacing should I use for a 5 ft long rod.

This question is from 12.4 in. x 1.05 in. White Shelf and Rod Bracket
Asked by
Buffalo
Read all my Q&A
April 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

May 2, 2016
Answer: 
Knape & Vogt recommends spacing supports every 16 inches on studs.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Where can I get the slide through plastic rod holders? I had two break.

This question is from 12.4 in. x 1.05 in. White Shelf and Rod Bracket
Asked by
Louisville, KY
Read all my Q&A
October 5, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 13, 2015
Answer: 
Call KV Customer Service at 1-800-253-1561 and they’ll send you free replacements.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

Can this bracket accommodate a 16 inch shelf and still have clearance for hanging?

This question is from 12.4 in. x 1.05 in. White Shelf and Rod Bracket
Asked by
St Louis, MO
Read all my Q&A
August 17, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Devine, TX
Read all my Q&A
September 29, 2015
Answer: 
Yes. I built mine with 18 inch shelves and they're holding great.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 25, 2015
Answer: 
This bracket supports shelves 11-15 in. deep. A 16 in. shelf will be too large for this bracket.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:39:54.323-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205561156, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • QUESTIONS, PRODUCT

Customer Reviews

12.4 in. x 1.05 in. Chrome Shelf and Rod Bracket is rated 3.5 out of 5 by 60.
Rated 5 out of 5 by from Great Value These are very strong metal brackets to hold a clothes pole and / or set up shelves. If putting up shelves, they come in different depths. There are 3 screw holes to hold the bracket. I put mine in a remodeled closet to help support a closet clothes pole. It does not come with screws. I used 2 inch drywall screws and made sure I anchored to the wood beams inside the walls. You will find these in stock in the closet section.
Date published: 2016-09-22
Rated 5 out of 5 by from These are very heavy brackets to provide outstanding support for the rod and shelf. The plastic ... These are very heavy brackets to provide outstanding support for the rod and shelf. The plastic rod holder provides a little "snap" to hold the rod in place and can break if you drop the bracket. Due to the arrangements of studs in my closet and desire for symmetry I used more brackets than necessary. If you find the alignment of the rod holder is a little off when you go to install the rod, I found that you can slightly bend the "J-hook" extension of the bracket. The easiest way was to slip off the plastic rod holder then slip the closed end of a combination wrench onto the J area to apply the needed force to bend. A length of wrench is helpful as the metal is pretty tough. Worked great.
Date published: 2016-12-20
Rated 4 out of 5 by from Not a great grasp on the bar but attractive It is as attractive as a closet shelf bracket can be however I want to point out just a couple of things. 1, it does not grasp the closet rod very well and 2, it does not come with screws so you are desperately trying to find ones that don't slip through very large holes yet also look ok. Still, reasonable purchase but considering you have to go buy screws as well, not as great of a purchase.
Date published: 2016-10-18
Rated 2 out of 5 by from clamp too small. bar popped off and scraped up our walls this is a great idea but the plastic clamps to mount the hanger bar are too small. when it clamped to the bar, it was good for about an hour and then all of a sudden we heard a loud noise and realized that the bar had popped/shot right off the clamps and the edges of the bar scraped up both sides of our closet wall pretty good. the clamps need to go farther around the bar.
Date published: 2016-08-16
Rated 1 out of 5 by from Horrible. Really poorly made. I purchased eight brackets and two steel clothing rod. I'm a contractor, so I know how to install a level shelf. One would expect that all the brackets would be identical, right, ha ha! These are clearly hand – welded, inconsistently produced, and the brackets and Rod support do not line up. Seriously, install three brackets in a row and either your shelf will be level, or your clothing rod will be supported by all three brackets: pick only one, they are 'off' by as much as 1/4". I only wish I could post a photo showing the final result. The Home Depot internal buyer who authorized this item should recall it and pull it out of stock immediately. For the average installer it will result in nothing but a horribly frustrating waste of time.
Date published: 2016-07-07
Rated 4 out of 5 by from Great rod bracket, seems very sturdy and well built. It can be a little tricky installing the sc... Great rod bracket, seems very sturdy and well built. It can be a little tricky installing the screws because of the downward cross bracket, it gets in the way of cordless screwdrivers and we ended up using a long manual screwdriver, but its solid.
Date published: 2016-12-27
Rated 2 out of 5 by from Inconvenient screw holed Looking good merchandise. But to put it in place is a challenge. Hard to put in screws when screwdriver is at the angle.
Date published: 2016-11-30
Rated 5 out of 5 by from Very sturdy. Holds tight. Perfect fit. Looks great. Very sturdy. Holds tight. Perfect fit. Looks great.
Date published: 2016-12-29
  • y_2017, m_1, d_14, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_60
  • loc_, sid_205561156, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT