Rated 3.8 out of 5 by 4
Rated 4.0 out of 5.0 by PedroGrade Nice product but needs clamps
The 90--degree connector is the best part of this package. It is smooth, more compact and works better than aluminum and other sheet metal counterparts. However, the threads molded into the plastic do not really allow the duct to be threaded onto it. First of all, the wire in the ducting is threaded in the opposite direction. Secondly, it is not quite tight enough to do the job. Works great with a clamp securing the ducting to the plastic.
I'd recommend this kit as a neat, relatively easy to install solution.
August 30, 2016
Rated 1.0 out of 5.0 by HDR1 Elbow Connector Won't Stay On
Thought this was a good idea for preventing kinks in the aluminum transition duct at the turn from the point of dryer attachment toward the home's exterior exhaust port ; however, the plastic dryer to duct connector would not stay attached, even with the use of a clamp. The air flow from the dryer would easily blow off the connector without use a clamp and, eventually, work it loose, then off, with use of a clamp. It was a hassle to look at the back of the dryer to see if it was still attached before each use, so I removed the duct connector and went back to use of the aluminum transition duct only with a clamp.
July 2, 2016
Rated 5.0 out of 5.0 by Blake1950 Easy to use
All the parts were there & easy to use. Looks great in place when done.
October 7, 2015
Rated 5.0 out of 5.0 by Rick Just What I Needed.
I needed to get my stacked washer and dryer closer to the wall, the 90 degree angle allowed me to do that. Easy to put on and the flexible hose was long enough to reach the vent from the new location.
September 22, 2015