Model # 18397

Internet #202041871

Store SKU #831395

Everbilt 60 in. Sliding Door Set
0030699183975

Everbilt

60 in. Sliding Door Set

  • The track is made of galvanized steel for corrosion resistance
  • Designed for doors 3/4" to 1-3/8" thick weighing up to 60 lbs.
  • Ideal for doors up to 60 in. wide; can be cut down to any length
$13.98 /each

Frequently Bought Together

Product Overview

The Everbilt 60 in. Bi-Fold Sliding Door Set allows 2 sliding closet doors to move smoothly and quietly. It is designed for doors with a thickness of 3/4 - 1-3/8 in. that weigh up to 60 lb. Its floor guide can withstand strong impacts and the jump-proof V-shaped track is made with corrosion-resistant galvanized steel for durability.

California residents: see   Proposition 65 information

  • Made of corrosion-resistant galvanized steel
  • Designed to allow closet doors to roll quietly and smoothly
  • Floor guide can withstand strong impacts
  • Dial-adjust hangers allow up to 5/16 in. vertical door adjustment
  • Designed for 2 sliding closet doors with a thickness of 3/4 - 1-3/8 in. each
  • Detailed instructions included for easy installation
  • Pre-drilling required for installation
  • Set includes dial-adjust hangers, door alignments, a V-shaped track, rollers, a floor guide and hardware
  • NOTE: Dial-adjust hangers come with two different offsets; when installing doors with 3/4 in. thickness use #2 hangers (1/8 in. offset) on the rear door; when installing doors with 1-3/8 in. thickness use #1 hangers (7/16 in.) on the rear door; refer to step 7 in instructions

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can this be used with doors that weigh 78 lbs ?

Asked by: Loretta
"No". This track is designed for a maximum 55 lb. doors.
Answered by: arromeck
Date published: 2016-05-04

Can this track be cut? It is a little long. Thank you.

Asked by: Rick
Yes it can. It can also accommodate an opening that is wider than the track is long as long as the rollers are placed inboard from the edge of the door far enough so they don't exit the track before the door comes to rest against the jamb.
Answered by: arromeck
Date published: 2016-01-30

Can I use this with older doors that currently run on a bottom track? They are light hollow doors.

Is there something about doors that run on a bottom track that makes them unable to be outfitted with a top track only system like this? I really like the look of not having a bottom track running along my nice new floor. It seems like my handyman doesn't think I can do this and I just am not understanding what is different about the doors as we have another set of doors same size that are running on a top track only and I don't see what is different about them.
Asked by: jenfromzen
There is nothing that would prevent this from replacing a bottom track setup. Simply mount the upper track, remove the existing bottom track, mount the wheels on the doors as per the instructions in the package. The obvious considerations are max door thickness being 1-3/8" and whether or not the door length has to be cut in order to accommodate the track. If the doors being hollow core have to be cut the inner frame of the door may have to be reworked. This isn't a big deal but does require some knowledge and time. Since time is money your handyman may be thinking the cost in labor would make it not worthwhile. If you have the tools and the ability to modify the doors, then certainly, this can be done.
Answered by: arromeck
Date published: 2016-01-30

How do I hang 1 inch doors?

Which order should the rollers be for 1 inch doors? And what should my offset from the header be?
Asked by: rluain
I may have reversed the hanger number, just use hanger that pushes door forward for outside door, router and hang back door with hangers that pull it back
Answered by: Hehmum
Date published: 2016-09-28
  • y_2017, m_4, d_24, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_, sid_202041871, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 107ms
  • QUESTIONS, PRODUCT

Customer Reviews

60 in. Sliding Door Set is rated 3.5 out of 5 by 23.
Rated 2 out of 5 by from Package says they work with 1-3/8" doors but they don't. Not enough clearance between plastic adj... Package says they work with 1-3/8" doors but they don't. Not enough clearance between plastic adjustment wheel on the outside door and the inside door. Should work with smaller doors.
Date published: 2016-12-30
Rated 1 out of 5 by from Package and instructions say this set will work with 1-3/8" doors. It won't. There is not enoug... Package and instructions say this set will work with 1-3/8" doors. It won't. There is not enough clearance on the track for doors of that width.
Date published: 2017-02-25
Rated 5 out of 5 by from As described. Easy to install. As described. Easy to install.
Date published: 2017-01-18
Rated 4 out of 5 by from Great replacment hardware for an old sliding door set upi I used this set up to replace a 30 year old sliding door set up and it was very straightforward. The quality of the slides is average and I do not anticipate any issue with longevity. My door track was straight and free of nicks so the hardware fit with no issues. The jamb I was installing this set up in was a bit smaller and I had to cut the track. you can do this a lot of different ways. I chose to cut it with a hacksaw and was able to make a nice straight cut. I cleaned up the edges with a file and it was ready to go. the track mounts right to the header with screws a nd the rollers attach to the back side of the doors. it really is a simple do it yourself jib and I had no issues. I would recommend this product.
Date published: 2016-04-29
Rated 4 out of 5 by from Be sure to read instructions carefully. Item 7 I used this set to replace my old set which had a damaged track due to mal adjusted doors and off track episodes with jamming by previous owner which caused dents in the track which I was unable to fix. The track in this kit was 58.5 inches which required no cutting to fit my finished opening of 58.75. The instructions are vague when it comes to describing the hangers. Unlike my old set, this set has two different "offset" measurements. Be sure to read item 7 of the instructions. The hangers with the 7/16" offset must be mounted on the door which will install first nearest the inside of the close. VERY IMPORTANT STEP. The adjustable hangers made squaring the doors to the edge quite easy. I now have a nice smooth operating bypass door set on my closet. No more "bumpity bump".
Date published: 2015-10-19
Rated 4 out of 5 by from Works but horrible instructions.. Bought this kit to replace bad track that had doors continually jumping the track. The major selling point for me is the v shaped track that ends my track jumping problems forever. While the dials to adjust the hangars are a convenience, it didn't really sway my decision to purchase this kit. Now to the problems... I too ran into the issue that other reviews mentioned about by 1 3/8" doors not able to slide past each other due to the width of the adjustment knob on the hangars. I was angry until looking it over a few times I notices that the hangars were not identical. 2 hangers put the wheel in the middle of the door width(for the rear door) and 2 put the wheel near the back of the other door (front door). This information should have been mentioned in the instructions. Without the proper hangars on each door, the doors won't slide past each other. For the 2nd problem, also related to instructions. My original track had been placed far enough back that there was almost an inch and a half in front to add trim to hide the hardware. I wanted to leave extra room for trim once again. Per the instructions I measured, then moved the track back an extra 1/2 inch to make sure I had room for my trim. But due to the front door having different wheel placement in order to allow room for rear door, I lost my extra 1/2 inch so the door is flush with the wall above. If I had followed the instructions my door would be out further than my wall. Decent product, but instructions need revision.
Date published: 2015-03-06
Rated 4 out of 5 by from Pay Attention to door hangers Everything was really easy to install until I tried to hang the 1 3/8 inch door and it would not slide past the other door. Pay close attention to the hangers. You will notice they are not exact. One set the wheels sit closer to the middle (back door) the other is closer to the edge of the door ( front door). I had to read a previous review before I noticed the difference. Once I got the right hangers together the doors slide with no problems.
Date published: 2015-03-22
Rated 5 out of 5 by from Sliding door set Simple, cost effective, easy to install. Would definitely recommend.
Date published: 2016-10-25
  • y_2017, m_4, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_, sid_202041871, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 123ms
  • REVIEWS, PRODUCT