Rated 3.3 out of 5 by 23
Rated 5.0 out of 5.0 by fastniky Easy instructions and easy to install.
I had no problem installing this sliding door set. I had never installed this type of door before, but the instructions are top notch. I am in process of re-doing several rooms and this small room needed a closet. I have 3 other rooms that need closets too, so now I know what I'm going to use. It easily holds FULL size hollow core inside doors. The lower guide is variable from really small, like 3/4" to pretty thick, 1 3/8"
June 10, 2016
Rated 4.0 out of 5.0 by handy Beware of Door Height Dimensions
Step 4 of the enclosed instructions calls for a bottom clearance of the door to be between 1 1/4 to 1 1/2 inches this should read 1/4 to 1/2 Inches. The metric dimensions for this in the enclosed instructions are 6.4 to 12.6 mm which are correct. Interestingly the total door height given on the outside package of 1 3/4 inches less than finished opening is correct.
August 11, 2016
Rated 3.0 out of 5.0 by Greg Frustrating
It was necessary to re-hang an interior sliding door before putting the house on the market. Having never done this before, and questioning the quality of the kit, I went ahead and removed the old track. The new install took a while as I was inexperienced. The metal was thin and gloves were worn. Although everything seemed to align well, there seems insufficient room for the doors to pass each other without rubbing. While opening one door at a time, especially the outermost-- it's okay. But sliding both doors around is a problem. Surprised at that.
June 22, 2016
Rated 4.0 out of 5.0 by Amsrknyc Relatively easy fix for stubborn doors
This is not fancy stainless steel...it's made of the appropriate materials. That said, the rail bends easily
June 21, 2016
Rated 5.0 out of 5.0 by Harvik Not a problem, good product
Some review writers had a problem. I had none. If you pay attention to the instructions, there is no problem. There are 2 different size hangers. The one with the least off-set goes on the front door, the one with the most off-set, on the rear door. I took two 2x4s and ripped them down to 1 3/8 inch thick and 80" long and put a hanger on each one to test the fit. It fit perfect and there was no clearance problem. Because the space is carpeted, I had to cut 1 1/2 inches off the bottom of the doors. I installed the bottom guide after I hung the doors. No problems, I'm very pleased with this product.
January 26, 2016
Rated 2.0 out of 5.0 by Darren Does not support the 1 3/8 thickness; hardware gets in the way.
This setup kind of works; which to me is a huge disappointment. A thinner door might work fine but the 1 3/8 is to large for the hardware even though it's clearly written it supports this size.
I can open and shut the door but only with extra effort and the doors will not pass by each other to switch sides.
January 26, 2016
Rated 2.0 out of 5.0 by mikew Good quality, bad instructions.
This kit works fine after some install problems caused by the instructions. There are 2 different sets of hangers in the kit, the 2 hangers with the offset top wheel bracket are for rear(inside) door, the 2 hangers with the straight top wheel bracket are for the front(outside) door. The instructions make no mention of this and the pictures show the 4 hangers as being identical. There is no excuse for an error of this importance in the included instructions.
October 22, 2015
Rated 3.0 out of 5.0 by KAT LOOK AT EACH DOOR HANGER!
You need to make sure to look at each door hanger the ones with more space/larger offset go in the back. The instructions try to explain this, but it wasn't making any sense to me,( what was being offset?) So after looking at these reviews I now see that you have two different pairs of hangers.
EVERBILT!!!!!!!! PLEASE INCLUDE THIS ON YOUR INSTRUCTIONS IN THE FUTURE
November 1, 2015