0030699011957

Everbilt

Model 01195

Internet #202305470

Store SKU #470777

Gray Heavy Duty Flip-Up Storage Hanger

$5.95 /each
  • 50 lb weight limit
  • Holds bikes, tools and more
  • Flips up when not in use

Frequently Bought Together

Product Overview

The 50 lbs. Flip-Up Storage Hanger is made of steel and has a protective vinyl coating. It is designed to maximize limited wall space. This wall-mount hanging device can be used around the home or at the office. It holds a bicycle of almost any size for storage or repair purposes. To save space when not in use, it flips up flat against the wall.

California residents: see   Proposition 65 information

  • Safe working load of 50 lb.
  • Flips up flat against the wall when not in use to save space
  • Can be used around the home or at the office
  • Mounting hardware included
  • Use #3 Philips bit for easy install into pre drilled holes

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions18 Answers

Customer Questions & Answers

Gray Heavy Duty Flip-Up Storage Hanger
Gray Heavy Duty Flip-Up Storage Hanger

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Gray Heavy Duty Flip-Up Storage Hanger
 
4 answers

will this work for a ladies bike ?

This question is from Gray Heavy Duty Flip-Up Storage Hanger
Asked by
seabrook NH
Read all my Q&A
October 5, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
hightstown, n j
Read all my Q&A
July 26, 2016
Answer: 
yep, have hung two ladies bikes on these
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
January 12, 2016
Answer: 
It definitely will if you purchase a cross-bar adapter. You can find them for around $15 to $40. I had looked at trying to use this storage hanger to hook between the rear fork and the down-tube. It might have worked, but I would recommend using the cross-bar adapter.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Delaware
Read all my Q&A
December 29, 2015
Answer: 
Yes, but the bike will not hang level. It will tilt at a roughly 45 degree angle when placed on the fork. I was still able to securely hang my wife's bike.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

October 6, 2015
Answer: 
This is designed for a bicycle that has a bar running from below the seat to the handlebars. If your bike is designed with this bar then this storage hanger will allow you to hang the bike horizontally. If your bike is more of a beach bike design, you could use 2 of model 18014, 9 in. Wall-Mounted Heavy Duty Utility Hanger, model 18048, Screw-In Bicycle Hook, or model 01221, Heavy-Duty Wall Mounted Bike Read More
This is designed for a bicycle that has a bar running from below the seat to the handlebars. If your bike is designed with this bar then this storage hanger will allow you to hang the bike horizontally. If your bike is more of a beach bike design, you could use 2 of model 18014, 9 in. Wall-Mounted Heavy Duty Utility Hanger, model 18048, Screw-In Bicycle Hook, or model 01221, Heavy-Duty Wall Mounted Bike Hanger. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Gray Heavy Duty Flip-Up Storage Hanger
 
4 answers

Will this accomodate bikes with larger width handlebars?

This question is from Gray Heavy Duty Flip-Up Storage Hanger
Asked by
NY, NY
Read all my Q&A
August 4, 2015
my handlebars measure just under 25" across
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Read all my Q&A
January 12, 2016
Answer: 
I measure the distance from the wall to the center of the bar at 11 inches. The handlebars of a standard 26" mountain bike just touches the wall.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Indianapolis, IN
Read all my Q&A
September 22, 2015
Answer: 
Should not be an issue though you might need to turn the front tire slightly
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Virginia Beach
Read all my Q&A
September 10, 2015
Answer: 
I have a 29'' mountain bike with 27'' handlebar (13''3/8 in each side). The distance between the center of the hook and the wall is 11'' 1/4, so the front wheel is a little bit tilted.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 12, 2015
Answer: 
This should work as the center of the hanger is 11-1/2 in. from the mounting plate. You may need to turn the handlebar slightly away from the wall.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Gray Heavy Duty Flip-Up Storage Hanger
 
4 answers

What is the distance from the wall to the center of the hooks? In other words, how far from the wall is the bike's top tube?

This question is from Gray Heavy Duty Flip-Up Storage Hanger
July 20, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Read all my Q&A
January 12, 2016
Answer: 
I measure the distance from the wall to the center of the bar at 11 inches. The handlebars of a standard 26" mountain bike just touches the wall.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Indianapolis, IN
Read all my Q&A
September 22, 2015
Answer: 
Distance from wall to center of the tube is 11.5".
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Virginia Beach
Read all my Q&A
September 10, 2015
Answer: 
Exactly 11''1/4. It suits my 29'' mountain bike pretty well, though the front wheel is a little bit tilted because my handlebar is 27'' (13'' 3/8 each side from center). Hope I helped.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

July 22, 2015
Answer: 
The distance from the mounting plate to the center of the hooks is 11-1/2 in.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from Gray Heavy Duty Flip-Up Storage Hanger
 
4 answers

How can i install the hanger on drywall?

This question is from Gray Heavy Duty Flip-Up Storage Hanger
Asked by
Read all my Q&A
March 22, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Indianapolis, IN
Read all my Q&A
September 22, 2015
Answer: 
Definitely would find a stud and attach to a stud under the drywall. Would not recommend installing into an unsupported section of drywall
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Virginia Beach
Read all my Q&A
September 10, 2015
Answer: 
You will need to find a stud, which will actually support the weight. Screws included so you will need a power drill to predrill the holes, a screwdriver and about five minutes from your time. If you don't have a stud finder you will need one also.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
June 4, 2015
Answer: 
I would not suggest you install this in dry wall UNLESS you find the stud being the wall first, drill pilot holes, and then put the screws in. You will require a stud finder. Typically, studs can be found spaced 16 inches apart. A small level will also be good to use. Have fun and good luck!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

March 23, 2015
Answer: 
The recommendation for installing this product is that it be mounted to a wall stud. Hollow wall installation is not recommended. Thank you for your inquiry.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T12:03:44.803-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202305470, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 83 reviewers.
Rated 4.0 out of 5.0 by no need to buy a different rack this is a great product. I have about 4 of these and have hung all sorts of bike from carbon fiber triathlon bikes to clunky mountain bikes. the only minor complaint is that the screws seem cheap and tend to strip easily - so i use my own screws when installing. As long as you dont strip the screws, installation takes no more than 5 minutes. great product - no need to spend any more money for a bike rack July 26, 2016
Rated 3.0 out of 5.0 by Good Purchase We like it. It is very functional to carry my bike August 8, 2016
Rated 4.0 out of 5.0 by Works Well for the Money For the price, these things work well and suited my needs nicely. If you try installing these where there's not a stud behind the wall it will rip right out, but if your wall is solid (or if you hit a stud), these will hold pretty well. The bikes balance a bit precariously and tend to bob around if bumped, but they've stayed up for the last few weeks without incident. A good quick solution. December 8, 2015
Rated 3.0 out of 5.0 by Good hanger, but be cautious. I think this hanger is great, but I ran into a problem with quality... The screws aren't sturdy enough and after a couple of days of supporting my bike, the upper screw head broke off sending the bike to the ground. I ended up having to drill out the hole and replace the screw with a much heavier lag bolt. Works great now! I would be cautious if you are hanging an expensive bike or it will be near a car in the garage. June 28, 2016
Rated 5.0 out of 5.0 by awesome Product I find nothing wrong in this product. Very practical and easy to install. Bought 10 and shipped to my home country. August 14, 2015
Rated 5.0 out of 5.0 by Great Storage Hanger As an owner of five (5) road bicycles, I search for storage hangers on various sites. I found this product on Amazon and triple the price. I read a review indicating that Home Depot carried the same product for less than $6. I searched the product on Home Depot website and located the item to be available at a nearby store in Fort Myers, FL. I initially purchased two and returned at a later date to purchased three more... Easy to installed and I am very satisfied with it. January 20, 2015
Rated 5.0 out of 5.0 by Good product I purchased this hanger for a bicycle and it works. It doesn't fasten the bicycle to it. The bicycle just hangs on it. April 12, 2016
Rated 5.0 out of 5.0 by Good inexpensive solution for bicycle storage Good hanger for bicycle to get it up off the floor. The way it is designed with two grabbing hooks makes it easier to find the best way to hang your bike if the top tube is not straight. It seems quite strong, stronger than it looks, and easy to install. I think all the people complaining about the screws don't realize you need to pre drill these holes into the wall studs and us a phillips #3 bit not a standard #2 or yes you will strip the screw head February 10, 2014
  • 2016-09-08 T12:30:35.629-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_83, tr_83
  • loc_en_US, sid_202305470, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 14ms
  • REVIEWS, PRODUCT