Model # 01158

Internet #202249585

Store SKU #174705

Everbilt Gray Wall-Mount or Peggable Multi-Purpose Tool Holder
0030699011582

Everbilt

Gray Wall-Mount or Peggable Multi-Purpose Tool Holder

$6.57 /each

Frequently Bought Together

Product Overview

The Everbilt Wall-Mount or Peggable Multipurpose Tool Holder can mount to peg board, studded walls or solid walls. It can be used in the garage, workshop, tool shed, basement, and throughout the home. The tool bar fits a variety of tools such as screwdrivers, pliers, hammers, hex keys etc. and has a cut out area to nest around wall studs if necessary. There is also a ruler on the tool bar for added convenience.

California residents: see   Proposition 65 information

  • Weight limits for entire toolbar 10 lbs. peg board; 15 lbs. wall
  • Plastic construction
  • Mounts on studded walls, drywall, 1/8 in. and 1/4 in. peg board
  • Includes wall mounting hardware
  • Holds a variety of common tools

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Size

what is size like length
Asked by: PP
The tool holder is 24-1/2" long and sticks out 6" when attached to a pegboard.
Answered by: PA700
Date published: 2017-03-23
  • y_2017, m_5, d_19, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_202249585, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms
  • QUESTIONS, PRODUCT

Customer Reviews

Gray Wall-Mount or Peggable Multi-Purpose Tool Holder is rated 3.8 out of 5 by 113.
Rated 3 out of 5 by from Two sets of "nibs" running parallel to each other do... Two sets of "nibs" running parallel to each other do not line up with peg hole spacing. You must remove the bottom set to allow the top set to engage the peg holes properly.
Date published: 2017-01-10
Rated 4 out of 5 by from Good product for my application. I just installed this tool holder on an Everbilt pegboard. I wa... Good product for my application. I just installed this tool holder on an Everbilt pegboard. I wanted a way to consolidate and organize tools I use frequently at my workbench. I have a variety of screwdrivers, pliers and miscellaneous tools already on it with room to spare. I plan to add a few hooks to the pegboard for hammers and other items. Although the tool holder was reasonably secure using just the pegboard attachments, I added a couple of screws just to be sure.
Date published: 2017-03-22
Rated 1 out of 5 by from i HAVE TRIED EVERY WAY POSSIBLE TO PUT SCREW DRIVERS SO THEY DON'T WOBBLE IT JUST ISN'T GOING TO ... i HAVE TRIED EVERY WAY POSSIBLE TO PUT SCREW DRIVERS SO THEY DON'T WOBBLE IT JUST ISN'T GOING TO HAPPEN, I NORMALLY DO NOT PUT DOWN A PRODUCT BUT HERE I NEED TO SO SOMEONE ELSE DOESN'T WASTE THEIR MONEY. i AM TRULY HOPING THAT I CAN GET MY MONEY BACK, AS I HAVE HAD IT FOR A LONG TIME AND JUST TODAY DECIDED TO PUT IT TO USE AND FOUND THAT I REALLY DO NOT WANT TO HAVE IT IN MY SHOP.
Date published: 2017-04-22
Rated 3 out of 5 by from the plastic tabs that are supposed to go in the peg board did not line up with all the holes. so ... the plastic tabs that are supposed to go in the peg board did not line up with all the holes. so i had to cut many of them on the bottom side off just to use the thing. also some of the holes for tools should be smaller at the bottom much the way the two large round holes are so that screw drivers and other assorted bit and attachments do not fall all the way through.
Date published: 2017-05-16
Rated 3 out of 5 by from Looked good in package, but the tines that go into the peg board are real flimsy and look like th... Looked good in package, but the tines that go into the peg board are real flimsy and look like they will fail to hold up if you were to remount the tool holder more than once. Was also hard to Line up the tines into the peg board. I suppose it is ok for most people if you are careful in mounting the first time.
Date published: 2017-03-28
Rated 3 out of 5 by from This Fit great on my peg board but the problem I have is not sure what to use all the slots for. ... This Fit great on my peg board but the problem I have is not sure what to use all the slots for. I already keep all my screw drivers in my tool chest and the oblong shaped holes dont really old the random small items I was wanting them to., so for right now i am using it as a make shift shelf.
Date published: 2017-02-14
Rated 4 out of 5 by from Worked fine for me. I clipped the pegboard projections... Worked fine for me. I clipped the pegboard projections off, and mounted it between studs in my utility room. I'm always dropping screwdrivers and tools in there, so this holder will keep me much better organized. And off my hands and knees, chasing things that fall. My wife will be thrilled.
Date published: 2017-04-04
Rated 2 out of 5 by from Except for a few screwdrivers, not much actually fits this to make it worthwhile. Most items incl... Except for a few screwdrivers, not much actually fits this to make it worthwhile. Most items including my hammer, snips, pliers either don't fit holes or slip right through others. Better to use the regular pegged hooks designed for pegboards.
Date published: 2017-01-10
  • y_2017, m_5, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_113
  • loc_, sid_202249585, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 93ms
  • REVIEWS, PRODUCT