Everbilt Wall-Mount or Peggable Multipurpose Tool Holder-01158 - The Home Depot
Discontinued

Everbilt

Model # 01158

Internet # 202249585

Store SKU # 174705

Wall-Mount or Peggable Multipurpose Tool Holder


Everbilt Wall-Mount or Peggable Multipurpose Tool Holder
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$6.57 / each
Loading...

PRODUCT OVERVIEW

Model # 01158

Internet # 202249585

Store SKU # 174705

The Everbilt Wall-Mount or Peggable Multipurpose Tool Holder can mount to pegboard, studded walls or solid walls. It can be used in the garage, workshop, tool shed, basement, and throughout the home. The tool bar fits a variety of tools such as screwdrivers, pliers, hammers, hex keys etc. and has a cut out area to nest around wall studs if necessary. There is also a ruler on the tool bar for added convenience.

California residents: seeProposition 65 information

  • Weight limits for entire toolbar-10 lbs. pegboard; 15 lbs. wall
  • Plastic construction
  • Mounts on studded walls, drywall, 1/8 in. and 1/4 in. pegboard
  • Includes wall mounting hardware
  • Holds a variety of common tools

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  6.18 in  Assembled Height (in.)  24.49 in 
Assembled Width (in.)  2.24 in 
Details
Color Family  Gray  Color/Finish  Gray 
Included  Hardware  Returnable  90-Day 
Storage Product Type  Complete Storage Systems 
Warranty / Certifications
Manufacturer Warranty  None 

CUSTOMER REVIEWS

Rated 3.9 out of 5 by 37 reviewers.
Rated 1 out of 5 by Does Not Work on Pegboard The "hooks" on this product do not line up with the holes in pegboard (see photo). I was able to use two of the products on pegboard by forcing the hooks into as many holes as I could and then adding screws. I tried it right side up and up side down - no difference. If purchased for mounting on non-pegboard surface you will have to cut off the hooks. July 29, 2014
Rated 2 out of 5 by Good idea - Poor design I purchased this because I have tons of tools on my pegboards and I needed to conserve some space. It, of course, attaches easily. Its very durable plastic and holds a good amount of weight. Unfortunately, that's all the good I have to say about it. There are tons of holes but most are so close together that you can't fit the tools in beside each other so you can't use about a quarter of them. The vast majority of holes are simple circles, best for screwdrivers - I liked this because I have a ton of them. However, because the holes are too close I can't use them all and still have to hang some of them on something else. I couldn't fit any pliers or wrenches I own in the slots. Either the slots were too narrow to fit tool in at all or the slots were too long and the tool fell all the way through. As you can see in my pic, the tools end up falling sideways making it harder to see and pick the one you want. This is either because the holes are too wide or they need to make the top and bottom holes farther from each other to better support the shaft. There is a ruler on it which could be convenient except that it isn't on the front edge where you could use it - its in the middle so its covered up by your tools. Its a good idea but it needs some practical testing and redesigning. November 24, 2013
Rated 5 out of 5 by Cheap and works This product is exactly what it appears to be. Product is very helpful for keeping organized. It will probably not last forever but its cheap enough to replace it when it breaks down. December 17, 2014
Rated 1 out of 5 by Peggable? The plastic pins on this product that would affix it to pegboard are soft, and bend. Put any weight (i.e. tools) on the product, and it falls off the pegboard. This product is a joke. Another piece of junk from China. Don't waste your money. December 10, 2014
Rated 5 out of 5 by LOVE THIS PRODUCT!!! This product solved a need that I have had for ages. My tools include a plethora of screwdrivers. I am not sure why, but I have many of them in all shapes and sizes. They have been in various drawers, a tool box, in a box still unpacked from my last move. When I saw this, the light bulb went on and I ordered it. Sure enough, it is perfect. I installed it on the bottom of my pegboard and my distributed my screwdrivers across it. There are two slots into which I placed pliers, and even two little cups for screws, nails or brads. I placed my tape measure in one of those. This product looks very good, but it is so serviceable. If it is possible to love a tool holder, then I love this one. September 2, 2014
2 3 4 5 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.